diff mbox series

[net-next,v6,4/7] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

Message ID 20240510-rzn1-gmac1-v6-4-b63942be334c@bootlin.com (mailing list archive)
State New
Headers show
Series net: stmmac: Add support for RZN1 GMAC devices | expand

Commit Message

Romain Gantois May 10, 2024, 7:38 a.m. UTC
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Introduce a mechanism whereby platforms can create their PCS instances
prior to the network device being published to userspace, but after
some of the core stmmac initialisation has been completed. This means
that the data structures that platforms need will be available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 8 +++++++-
 include/linux/stmmac.h                            | 2 ++
 2 files changed, 9 insertions(+), 1 deletion(-)

Comments

Simon Horman May 11, 2024, 6:11 p.m. UTC | #1
On Fri, May 10, 2024 at 09:38:11AM +0200, Romain Gantois wrote:
> From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
> 
> Introduce a mechanism whereby platforms can create their PCS instances
> prior to the network device being published to userspace, but after
> some of the core stmmac initialisation has been completed. This means
> that the data structures that platforms need will be available.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 8 +++++++-
>  include/linux/stmmac.h                            | 2 ++
>  2 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 778d79cdb2e6d..f562c563aab55 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -505,7 +505,10 @@ int stmmac_pcs_setup(struct net_device *ndev)
>  	priv = netdev_priv(ndev);
>  	mode = priv->plat->phy_interface;
>  
> -	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> +	if (priv->plat->pcs_init) {
> +		ret = priv->plat->pcs_init(priv);
> +	} else if (priv->plat->mdio_bus_data &&
> +		   priv->plat->mdio_bus_data->has_xpcs) {
>  		/* Try to probe the XPCS by scanning all addresses */
>  		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
>  			xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);

I am unsure if this can occur, but if priv->plat->pcs_init returns 0 then
xpcs will be used while uninitialised towards the end of this function.

Flagged by Smatch.

...
Romain Gantois May 13, 2024, 7:26 a.m. UTC | #2
Hello Simon,

On Sat, 11 May 2024, Simon Horman wrote:

> > -	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> > +	if (priv->plat->pcs_init) {
> > +		ret = priv->plat->pcs_init(priv);
> > +	} else if (priv->plat->mdio_bus_data &&
> > +		   priv->plat->mdio_bus_data->has_xpcs) {
> >  		/* Try to probe the XPCS by scanning all addresses */
> >  		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
> >  			xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
> 
> I am unsure if this can occur, but if priv->plat->pcs_init returns 0 then
> xpcs will be used while uninitialised towards the end of this function.

Indeed this could occur, I've just sent a v7 that fixes this.

Thanks,
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 778d79cdb2e6d..f562c563aab55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -505,7 +505,10 @@  int stmmac_pcs_setup(struct net_device *ndev)
 	priv = netdev_priv(ndev);
 	mode = priv->plat->phy_interface;
 
-	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
+	if (priv->plat->pcs_init) {
+		ret = priv->plat->pcs_init(priv);
+	} else if (priv->plat->mdio_bus_data &&
+		   priv->plat->mdio_bus_data->has_xpcs) {
 		/* Try to probe the XPCS by scanning all addresses */
 		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
 			xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
@@ -533,6 +536,9 @@  void stmmac_pcs_clean(struct net_device *ndev)
 {
 	struct stmmac_priv *priv = netdev_priv(ndev);
 
+	if (priv->plat->pcs_exit)
+		priv->plat->pcs_exit(priv);
+
 	if (!priv->hw->xpcs)
 		return;
 
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index dfa1828cd756a..4a24a246c617d 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -285,6 +285,8 @@  struct plat_stmmacenet_data {
 	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
 			   void *ctx);
 	void (*dump_debug_regs)(void *priv);
+	int (*pcs_init)(struct stmmac_priv *priv);
+	void (*pcs_exit)(struct stmmac_priv *priv);
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;