Message ID | 20240510071432.62913-2-five231003@gmail.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Use scope based cleanup in drivers/soc/ti/ | expand |
On Fri, 10 May 2024 12:43:22 +0530 Kousik Sanagavarapu <five231003@gmail.com> wrote: > Use scope based cleanup instead of manual of_node_put() calls, hence > simplifying the handling of error paths at various places. > > Suggested-by: Julia Lawall <julia.lawall@inria.fr> > Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> > --- > drivers/soc/ti/pruss.c | 48 ++++++++++++++---------------------------- > 1 file changed, 16 insertions(+), 32 deletions(-) > > diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c > index 24a42e0b645c..8f238d59eca9 100644 > --- a/drivers/soc/ti/pruss.c > +++ b/drivers/soc/ti/pruss.c > @@ -381,13 +381,13 @@ static int pruss_clk_mux_setup(struct pruss *pruss, struct clk *clk_mux, > static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) > { > const struct pruss_private_data *data; > - struct device_node *clks_np; > struct device *dev = pruss->dev; > int ret = 0; > > data = of_device_get_match_data(dev); > > - clks_np = of_get_child_by_name(cfg_node, "clocks"); > + struct device_node *clks_np __free(device_node) = > + of_get_child_by_name(cfg_node, "clocks"); > if (!clks_np) { > dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node); > return -ENODEV; > @@ -398,7 +398,7 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) > "coreclk-mux", clks_np); > if (ret) { > dev_err(dev, "failed to setup coreclk-mux\n"); > - goto put_clks_node; > + return ret; This driver would also benefit from use of dev_err_probe() for all cases like this that are called only from the probe() callback. return dev_err_probe(dev, ret, "failed to setup coreclk-mux\n2); Handles any deferred cases nicely, but in general simplifies code by making these printer error message and return cases a single line. > } > } > > @@ -406,13 +406,10 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) > clks_np); > if (ret) { > dev_err(dev, "failed to setup iepclk-mux\n"); > - goto put_clks_node; > + return ret; > } > > -put_clks_node: > - of_node_put(clks_np); > - > - return ret; > + return 0; > } > > static struct regmap_config regmap_conf = { > @@ -424,26 +421,22 @@ static struct regmap_config regmap_conf = { > static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss) > { > struct device_node *np = dev_of_node(dev); > - struct device_node *child; > + struct device_node *child __free(device_node) = > + of_get_child_by_name(np, "cfg"); > struct resource res; > int ret; > > - child = of_get_child_by_name(np, "cfg"); > if (!child) { > dev_err(dev, "%pOF is missing its 'cfg' node\n", child); > return -ENODEV; > } > > - if (of_address_to_resource(child, 0, &res)) { > - ret = -ENOMEM; > - goto node_put; > - } > + if (of_address_to_resource(child, 0, &res)) > + return -ENOMEM; > > pruss->cfg_base = devm_ioremap(dev, res.start, resource_size(&res)); > - if (!pruss->cfg_base) { > - ret = -ENOMEM; > - goto node_put; > - } > + if (!pruss->cfg_base) > + return -ENOMEM; > > regmap_conf.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", child, > (u64)res.start); > @@ -455,16 +448,13 @@ static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss) > if (IS_ERR(pruss->cfg_regmap)) { > dev_err(dev, "regmap_init_mmio failed for cfg, ret = %ld\n", > PTR_ERR(pruss->cfg_regmap)); > - ret = PTR_ERR(pruss->cfg_regmap); > - goto node_put; > + return PTR_ERR(pruss->cfg_regmap); > } > > ret = pruss_clk_init(pruss, child); > if (ret) > dev_err(dev, "pruss_clk_init failed, ret = %d\n", ret); > > -node_put: > - of_node_put(child); > return ret; > } > > @@ -472,7 +462,6 @@ static int pruss_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct device_node *np = dev_of_node(dev); > - struct device_node *child; > struct pruss *pruss; > struct resource res; > int ret, i, index; > @@ -494,7 +483,8 @@ static int pruss_probe(struct platform_device *pdev) > pruss->dev = dev; > mutex_init(&pruss->lock); > > - child = of_get_child_by_name(np, "memories"); > + struct device_node *child __free(device_node) = > + of_get_child_by_name(np, "memories"); In this case, the scope of the device_node being held is increased quite a bit. Whilst that shouldn't be a problem, it is a bit ugly. Perhaps factor this code out into another function similar to the ones above? Jonathan > if (!child) { > dev_err(dev, "%pOF is missing its 'memories' node\n", child); > return -ENODEV; > @@ -510,22 +500,17 @@ static int pruss_probe(struct platform_device *pdev) > > index = of_property_match_string(child, "reg-names", > mem_names[i]); > - if (index < 0) { > - of_node_put(child); > + if (index < 0) > return index; > - } > > - if (of_address_to_resource(child, index, &res)) { > - of_node_put(child); > + if (of_address_to_resource(child, index, &res)) > return -EINVAL; > - } > > pruss->mem_regions[i].va = devm_ioremap(dev, res.start, > resource_size(&res)); > if (!pruss->mem_regions[i].va) { > dev_err(dev, "failed to parse and map memory resource %d %s\n", > i, mem_names[i]); > - of_node_put(child); > return -ENOMEM; > } > pruss->mem_regions[i].pa = res.start; > @@ -535,7 +520,6 @@ static int pruss_probe(struct platform_device *pdev) > mem_names[i], &pruss->mem_regions[i].pa, > pruss->mem_regions[i].size, pruss->mem_regions[i].va); > } > - of_node_put(child); > > platform_set_drvdata(pdev, pruss); >
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c index 24a42e0b645c..8f238d59eca9 100644 --- a/drivers/soc/ti/pruss.c +++ b/drivers/soc/ti/pruss.c @@ -381,13 +381,13 @@ static int pruss_clk_mux_setup(struct pruss *pruss, struct clk *clk_mux, static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) { const struct pruss_private_data *data; - struct device_node *clks_np; struct device *dev = pruss->dev; int ret = 0; data = of_device_get_match_data(dev); - clks_np = of_get_child_by_name(cfg_node, "clocks"); + struct device_node *clks_np __free(device_node) = + of_get_child_by_name(cfg_node, "clocks"); if (!clks_np) { dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node); return -ENODEV; @@ -398,7 +398,7 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) "coreclk-mux", clks_np); if (ret) { dev_err(dev, "failed to setup coreclk-mux\n"); - goto put_clks_node; + return ret; } } @@ -406,13 +406,10 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node) clks_np); if (ret) { dev_err(dev, "failed to setup iepclk-mux\n"); - goto put_clks_node; + return ret; } -put_clks_node: - of_node_put(clks_np); - - return ret; + return 0; } static struct regmap_config regmap_conf = { @@ -424,26 +421,22 @@ static struct regmap_config regmap_conf = { static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss) { struct device_node *np = dev_of_node(dev); - struct device_node *child; + struct device_node *child __free(device_node) = + of_get_child_by_name(np, "cfg"); struct resource res; int ret; - child = of_get_child_by_name(np, "cfg"); if (!child) { dev_err(dev, "%pOF is missing its 'cfg' node\n", child); return -ENODEV; } - if (of_address_to_resource(child, 0, &res)) { - ret = -ENOMEM; - goto node_put; - } + if (of_address_to_resource(child, 0, &res)) + return -ENOMEM; pruss->cfg_base = devm_ioremap(dev, res.start, resource_size(&res)); - if (!pruss->cfg_base) { - ret = -ENOMEM; - goto node_put; - } + if (!pruss->cfg_base) + return -ENOMEM; regmap_conf.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", child, (u64)res.start); @@ -455,16 +448,13 @@ static int pruss_cfg_of_init(struct device *dev, struct pruss *pruss) if (IS_ERR(pruss->cfg_regmap)) { dev_err(dev, "regmap_init_mmio failed for cfg, ret = %ld\n", PTR_ERR(pruss->cfg_regmap)); - ret = PTR_ERR(pruss->cfg_regmap); - goto node_put; + return PTR_ERR(pruss->cfg_regmap); } ret = pruss_clk_init(pruss, child); if (ret) dev_err(dev, "pruss_clk_init failed, ret = %d\n", ret); -node_put: - of_node_put(child); return ret; } @@ -472,7 +462,6 @@ static int pruss_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev_of_node(dev); - struct device_node *child; struct pruss *pruss; struct resource res; int ret, i, index; @@ -494,7 +483,8 @@ static int pruss_probe(struct platform_device *pdev) pruss->dev = dev; mutex_init(&pruss->lock); - child = of_get_child_by_name(np, "memories"); + struct device_node *child __free(device_node) = + of_get_child_by_name(np, "memories"); if (!child) { dev_err(dev, "%pOF is missing its 'memories' node\n", child); return -ENODEV; @@ -510,22 +500,17 @@ static int pruss_probe(struct platform_device *pdev) index = of_property_match_string(child, "reg-names", mem_names[i]); - if (index < 0) { - of_node_put(child); + if (index < 0) return index; - } - if (of_address_to_resource(child, index, &res)) { - of_node_put(child); + if (of_address_to_resource(child, index, &res)) return -EINVAL; - } pruss->mem_regions[i].va = devm_ioremap(dev, res.start, resource_size(&res)); if (!pruss->mem_regions[i].va) { dev_err(dev, "failed to parse and map memory resource %d %s\n", i, mem_names[i]); - of_node_put(child); return -ENOMEM; } pruss->mem_regions[i].pa = res.start; @@ -535,7 +520,6 @@ static int pruss_probe(struct platform_device *pdev) mem_names[i], &pruss->mem_regions[i].pa, pruss->mem_regions[i].size, pruss->mem_regions[i].va); } - of_node_put(child); platform_set_drvdata(pdev, pruss);
Use scope based cleanup instead of manual of_node_put() calls, hence simplifying the handling of error paths at various places. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> --- drivers/soc/ti/pruss.c | 48 ++++++++++++++---------------------------- 1 file changed, 16 insertions(+), 32 deletions(-)