| Message ID | 20240514224508.212318-7-romank@linux.microsoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64/hyperv: Support Virtual Trust Level Boot | expand |
On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: > The hyperv-pci driver uses ACPI for MSI IRQ domain configuration > on arm64 thereby it won't be able to do that in the VTL mode where > only DeviceTree can be used. > > Update the hyperv-pci driver to discover interrupt configuration > via DeviceTree. Subject prefix should be "PCI: hv:" > > Signed-off-by: Roman Kisel <romank@linux.microsoft.com> > --- > drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- > include/linux/acpi.h | 9 +++++++++ > 2 files changed, 19 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c > index 1eaffff40b8d..ccc2b54206f4 100644 > --- a/drivers/pci/controller/pci-hyperv.c > +++ b/drivers/pci/controller/pci-hyperv.c > @@ -906,9 +906,16 @@ static int hv_pci_irqchip_init(void) > * way to ensure that all the corresponding devices are also gone and > * no interrupts will be generated. > */ > - hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, > - fn, &hv_pci_domain_ops, > - chip_data); > + if (acpi_disabled) > + hv_msi_gic_irq_domain = irq_domain_create_hierarchy( > + irq_find_matching_fwnode(fn, DOMAIN_BUS_ANY), > + 0, HV_PCI_MSI_SPI_NR, > + fn, &hv_pci_domain_ops, > + chip_data); > + else > + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, > + fn, &hv_pci_domain_ops, > + chip_data); Upto 100 characters per line are supported now, we can have less line breaks. > > if (!hv_msi_gic_irq_domain) { > pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n"); > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index b7165e52b3c6..498cbb2c40a1 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -1077,6 +1077,15 @@ static inline bool acpi_sleep_state_supported(u8 sleep_state) > return false; > } > > +static inline struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, > + unsigned int size, > + struct fwnode_handle *fwnode, > + const struct irq_domain_ops *ops, > + void *host_data) > +{ > + return NULL; > +} > + > #endif /* !CONFIG_ACPI */ > > extern void arch_post_acpi_subsys_init(void); > -- > 2.45.0 >
From: Roman Kisel <romank@linux.microsoft.com> Sent: Tuesday, May 14, 2024 3:44 PM > > The hyperv-pci driver uses ACPI for MSI IRQ domain configuration > on arm64 thereby it won't be able to do that in the VTL mode where > only DeviceTree can be used. That sentence seems a bit weird. How about: The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on arm64. It won't be able to do that in the VTL mode where only DeviceTree can be used. > > Update the hyperv-pci driver to discover interrupt configuration > via DeviceTree. "discover interrupt configuration"? I think that's a cut-and-paste error from the previous patch. > > Signed-off-by: Roman Kisel <romank@linux.microsoft.com> > --- > drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- > include/linux/acpi.h | 9 +++++++++ > 2 files changed, 19 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c > index 1eaffff40b8d..ccc2b54206f4 100644 > --- a/drivers/pci/controller/pci-hyperv.c > +++ b/drivers/pci/controller/pci-hyperv.c > @@ -906,9 +906,16 @@ static int hv_pci_irqchip_init(void) > * way to ensure that all the corresponding devices are also gone and > * no interrupts will be generated. > */ > - hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, > - fn, &hv_pci_domain_ops, > - chip_data); > + if (acpi_disabled) > + hv_msi_gic_irq_domain = irq_domain_create_hierarchy( > + irq_find_matching_fwnode(fn, DOMAIN_BUS_ANY), > + 0, HV_PCI_MSI_SPI_NR, > + fn, &hv_pci_domain_ops, > + chip_data); Does the above really work? It seems doubtful to me that irq_find_matching_fwnode() always finds the parent domain that you want. But I don't have a deep understanding of how this works or is supposed to work, so I don't know for sure. If the above *does* actually work for all cases, then should it also work for the ACPI case? Then you could avoid the messiness when acpi_irq_create_hierarchy() doesn't exist. > + else > + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, > + fn, &hv_pci_domain_ops, > + chip_data); > > if (!hv_msi_gic_irq_domain) { > pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n"); I'm wondering if these are the only changes needed to make vPCI work on arm64 with DeviceTree. The DMA coherence issue I mentioned in the previous patch definitely affects vPCI devices, so it needs to be fully understood and verified to work correctly. > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index b7165e52b3c6..498cbb2c40a1 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -1077,6 +1077,15 @@ static inline bool acpi_sleep_state_supported(u8 sleep_state) > return false; > } > > +static inline struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, > + unsigned int size, > + struct fwnode_handle *fwnode, > + const struct irq_domain_ops *ops, > + void *host_data) > +{ > + return NULL; > +} > + > #endif /* !CONFIG_ACPI */ > > extern void arch_post_acpi_subsys_init(void); > -- > 2.45.0 >
On 5/15/2024 2:48 AM, Saurabh Singh Sengar wrote: > On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: >> The hyperv-pci driver uses ACPI for MSI IRQ domain configuration >> on arm64 thereby it won't be able to do that in the VTL mode where >> only DeviceTree can be used. >> >> Update the hyperv-pci driver to discover interrupt configuration >> via DeviceTree. > > Subject prefix should be "PCI: hv:" > Thanks! >> >> Signed-off-by: Roman Kisel <romank@linux.microsoft.com> >> --- >> drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- >> include/linux/acpi.h | 9 +++++++++ >> 2 files changed, 19 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c >> index 1eaffff40b8d..ccc2b54206f4 100644 >> --- a/drivers/pci/controller/pci-hyperv.c >> +++ b/drivers/pci/controller/pci-hyperv.c >> @@ -906,9 +906,16 @@ static int hv_pci_irqchip_init(void) >> * way to ensure that all the corresponding devices are also gone and >> * no interrupts will be generated. >> */ >> - hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, >> - fn, &hv_pci_domain_ops, >> - chip_data); >> + if (acpi_disabled) >> + hv_msi_gic_irq_domain = irq_domain_create_hierarchy( >> + irq_find_matching_fwnode(fn, DOMAIN_BUS_ANY), >> + 0, HV_PCI_MSI_SPI_NR, >> + fn, &hv_pci_domain_ops, >> + chip_data); >> + else >> + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, >> + fn, &hv_pci_domain_ops, >> + chip_data); > > Upto 100 characters per line are supported now, we can have less > line breaks. > Fewer line breaks would make this look nicer, let me know if you had any particular style in mind. >> >> if (!hv_msi_gic_irq_domain) { >> pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n"); >> diff --git a/include/linux/acpi.h b/include/linux/acpi.h >> index b7165e52b3c6..498cbb2c40a1 100644 >> --- a/include/linux/acpi.h >> +++ b/include/linux/acpi.h >> @@ -1077,6 +1077,15 @@ static inline bool acpi_sleep_state_supported(u8 sleep_state) >> return false; >> } >> >> +static inline struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, >> + unsigned int size, >> + struct fwnode_handle *fwnode, >> + const struct irq_domain_ops *ops, >> + void *host_data) >> +{ >> + return NULL; >> +} >> + >> #endif /* !CONFIG_ACPI */ >> >> extern void arch_post_acpi_subsys_init(void); >> -- >> 2.45.0 >>
On Wed, May 15, 2024 at 09:34:09AM -0700, Roman Kisel wrote: > > > On 5/15/2024 2:48 AM, Saurabh Singh Sengar wrote: > > On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: > > > The hyperv-pci driver uses ACPI for MSI IRQ domain configuration > > > on arm64 thereby it won't be able to do that in the VTL mode where > > > only DeviceTree can be used. > > > > > > Update the hyperv-pci driver to discover interrupt configuration > > > via DeviceTree. > > > > Subject prefix should be "PCI: hv:" > > > Thanks! "git log --oneline <file>" is a good guide in general and could be used for other patches in this series as well. > > > + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, > > > + fn, &hv_pci_domain_ops, > > > + chip_data); > > > > Upto 100 characters per line are supported now, we can have less > > line breaks. > > > Fewer line breaks would make this look nicer, let me know if you had any > particular style in mind. Let's not use the checkpatch "$max_line_length = 100" as a guide. The pci-hyperv.c file as a whole is obviously formatted to fit in 80 columns with few exceptions. IMO it would not be an improvement to scatter random 100-column lines throughout. That would just mean the file would look bad in an 80-column terminal and there would be a lot of wasted space in a 100-column terminal. Bjorn
On 5/15/2024 6:47 AM, Michael Kelley wrote: > From: Roman Kisel <romank@linux.microsoft.com> Sent: Tuesday, May 14, 2024 3:44 PM >> >> The hyperv-pci driver uses ACPI for MSI IRQ domain configuration >> on arm64 thereby it won't be able to do that in the VTL mode where >> only DeviceTree can be used. > > That sentence seems a bit weird. How about: > > The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on arm64. > It won't be able to do that in the VTL mode where only DeviceTree can be used. > Agreed, appreciate your wordsmithing :) >> >> Update the hyperv-pci driver to discover interrupt configuration >> via DeviceTree. > > "discover interrupt configuration"? I think that's a cut-and-paste error > from the previous patch. > Guilty as charged :) Will fix. >> >> Signed-off-by: Roman Kisel <romank@linux.microsoft.com> >> --- >> drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- >> include/linux/acpi.h | 9 +++++++++ >> 2 files changed, 19 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c >> index 1eaffff40b8d..ccc2b54206f4 100644 >> --- a/drivers/pci/controller/pci-hyperv.c >> +++ b/drivers/pci/controller/pci-hyperv.c >> @@ -906,9 +906,16 @@ static int hv_pci_irqchip_init(void) >> * way to ensure that all the corresponding devices are also gone and >> * no interrupts will be generated. >> */ >> - hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, >> - fn, &hv_pci_domain_ops, >> - chip_data); >> + if (acpi_disabled) >> + hv_msi_gic_irq_domain = irq_domain_create_hierarchy( >> + irq_find_matching_fwnode(fn, DOMAIN_BUS_ANY), >> + 0, HV_PCI_MSI_SPI_NR, >> + fn, &hv_pci_domain_ops, >> + chip_data); > > Does the above really work? It seems doubtful to me that irq_find_matching_fwnode() > always finds the parent domain that you want. But I don't have a deep understanding > of how this works or is supposed to work, so I don't know for sure. > > If the above *does* actually work for all cases, then should it also work for the ACPI > case? Then you could avoid the messiness when acpi_irq_create_hierarchy() doesn't > exist. > Have not got a system to validate this on. Conceptually (at my level of ignorance) didn't look very off... Will use the "collapsed" version you're suggesting as the litmus test. >> + else >> + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, >> + fn, &hv_pci_domain_ops, >> + chip_data); >> >> if (!hv_msi_gic_irq_domain) { >> pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n"); > > I'm wondering if these are the only changes needed to make vPCI work on > arm64 with DeviceTree. The DMA coherence issue I mentioned in the previous patch > definitely affects vPCI devices, so it needs to be fully understood and verified to work > correctly. > Likely not all as the code is venturing into the new territory composed of the pieces never snapped in place together before. Will work on the previous patch to resolve as many concerns as possible. >> diff --git a/include/linux/acpi.h b/include/linux/acpi.h >> index b7165e52b3c6..498cbb2c40a1 100644 >> --- a/include/linux/acpi.h >> +++ b/include/linux/acpi.h >> @@ -1077,6 +1077,15 @@ static inline bool acpi_sleep_state_supported(u8 sleep_state) >> return false; >> } >> >> +static inline struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, >> + unsigned int size, >> + struct fwnode_handle *fwnode, >> + const struct irq_domain_ops *ops, >> + void *host_data) >> +{ >> + return NULL; >> +} >> + >> #endif /* !CONFIG_ACPI */ >> >> extern void arch_post_acpi_subsys_init(void); >> -- >> 2.45.0 >>
On 5/15/2024 11:12 AM, Bjorn Helgaas wrote: > On Wed, May 15, 2024 at 09:34:09AM -0700, Roman Kisel wrote: >> >> >> On 5/15/2024 2:48 AM, Saurabh Singh Sengar wrote: >>> On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: >>>> The hyperv-pci driver uses ACPI for MSI IRQ domain configuration >>>> on arm64 thereby it won't be able to do that in the VTL mode where >>>> only DeviceTree can be used. >>>> >>>> Update the hyperv-pci driver to discover interrupt configuration >>>> via DeviceTree. >>> >>> Subject prefix should be "PCI: hv:" >>> >> Thanks! > > "git log --oneline <file>" is a good guide in general and could be > used for other patches in this series as well. > Many thanks for suggesting that :) >>>> + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, >>>> + fn, &hv_pci_domain_ops, >>>> + chip_data); >>> >>> Upto 100 characters per line are supported now, we can have less >>> line breaks. >>> >> Fewer line breaks would make this look nicer, let me know if you had any >> particular style in mind. > > Let's not use the checkpatch "$max_line_length = 100" as a guide. > > The pci-hyperv.c file as a whole is obviously formatted to fit in 80 > columns with few exceptions. > > IMO it would not be an improvement to scatter random 100-column lines > throughout. That would just mean the file would look bad in an > 80-column terminal and there would be a lot of wasted space in a > 100-column terminal. > Appreciate showing me the data-driven way of reasoning about that very much! > Bjorn
On Wed, May 15, 2024 at 01:12:38PM -0500, Bjorn Helgaas wrote: > On Wed, May 15, 2024 at 09:34:09AM -0700, Roman Kisel wrote: > > > > > > On 5/15/2024 2:48 AM, Saurabh Singh Sengar wrote: > > > On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: > > > > The hyperv-pci driver uses ACPI for MSI IRQ domain configuration > > > > on arm64 thereby it won't be able to do that in the VTL mode where > > > > only DeviceTree can be used. > > > > > > > > Update the hyperv-pci driver to discover interrupt configuration > > > > via DeviceTree. > > > > > > Subject prefix should be "PCI: hv:" I forgot to also suggest that the subject line begin with a verb, e.g., "Get vPCI MSI IRQ domain from DT" or similar, again so it reads consistently with previous commits. Oh, I see patch 5/6, "Get the irq number from DeviceTree" is also very similar. It would be nice if they matched, e.g., both used "IRQ" and "DT". Bjorn
On 6/7/2024 12:55 PM, Bjorn Helgaas wrote: > On Wed, May 15, 2024 at 01:12:38PM -0500, Bjorn Helgaas wrote: >> On Wed, May 15, 2024 at 09:34:09AM -0700, Roman Kisel wrote: >>> >>> >>> On 5/15/2024 2:48 AM, Saurabh Singh Sengar wrote: >>>> On Tue, May 14, 2024 at 03:43:53PM -0700, Roman Kisel wrote: >>>>> The hyperv-pci driver uses ACPI for MSI IRQ domain configuration >>>>> on arm64 thereby it won't be able to do that in the VTL mode where >>>>> only DeviceTree can be used. >>>>> >>>>> Update the hyperv-pci driver to discover interrupt configuration >>>>> via DeviceTree. >>>> >>>> Subject prefix should be "PCI: hv:" > > I forgot to also suggest that the subject line begin with a verb, > e.g., "Get vPCI MSI IRQ domain from DT" or similar, again so it reads > consistently with previous commits. > > Oh, I see patch 5/6, "Get the irq number from DeviceTree" is also very > similar. It would be nice if they matched, e.g., both used "IRQ" and > "DT". > > Bjorn Will update, thanks! Going to send another version during the next week most likely.
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 1eaffff40b8d..ccc2b54206f4 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -906,9 +906,16 @@ static int hv_pci_irqchip_init(void) * way to ensure that all the corresponding devices are also gone and * no interrupts will be generated. */ - hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, - fn, &hv_pci_domain_ops, - chip_data); + if (acpi_disabled) + hv_msi_gic_irq_domain = irq_domain_create_hierarchy( + irq_find_matching_fwnode(fn, DOMAIN_BUS_ANY), + 0, HV_PCI_MSI_SPI_NR, + fn, &hv_pci_domain_ops, + chip_data); + else + hv_msi_gic_irq_domain = acpi_irq_create_hierarchy(0, HV_PCI_MSI_SPI_NR, + fn, &hv_pci_domain_ops, + chip_data); if (!hv_msi_gic_irq_domain) { pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n"); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index b7165e52b3c6..498cbb2c40a1 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -1077,6 +1077,15 @@ static inline bool acpi_sleep_state_supported(u8 sleep_state) return false; } +static inline struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags, + unsigned int size, + struct fwnode_handle *fwnode, + const struct irq_domain_ops *ops, + void *host_data) +{ + return NULL; +} + #endif /* !CONFIG_ACPI */ extern void arch_post_acpi_subsys_init(void);
The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on arm64 thereby it won't be able to do that in the VTL mode where only DeviceTree can be used. Update the hyperv-pci driver to discover interrupt configuration via DeviceTree. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> --- drivers/pci/controller/pci-hyperv.c | 13 ++++++++++--- include/linux/acpi.h | 9 +++++++++ 2 files changed, 19 insertions(+), 3 deletions(-)