@@ -13,6 +13,9 @@ struct restricted_buffer {
size_t size;
struct sg_table sg_table;
+
+ /* A reference to a buffer in the trusted or secure world. */
+ u64 restricted_addr;
};
struct restricted_heap {
@@ -27,6 +27,46 @@ enum mtk_secure_mem_type {
MTK_SECURE_MEMORY_TYPE_CM_TZ = 1,
};
+/* This structure also is synchronized with tee, thus not use the phys_addr_t */
+struct mtk_tee_scatterlist {
+ u64 pa;
+ u32 length;
+} __packed;
+
+enum mtk_secure_buffer_tee_cmd {
+ /*
+ * Allocate the zeroed secure memory from TEE.
+ *
+ * [in] value[0].a: The buffer size.
+ * value[0].b: alignment.
+ * [in] value[1].a: enum mtk_secure_mem_type.
+ * [inout]
+ * [out] value[2].a: entry number of memory block.
+ * If this is 1, it means the memory is continuous.
+ * value[2].b: buffer PA base.
+ * [out] value[3].a: The secure handle.
+ */
+ MTK_TZCMD_SECMEM_ZALLOC = 0x10000, /* MTK TEE Command ID Base */
+
+ /*
+ * Free secure memory.
+ *
+ * [in] value[0].a: The secure handle of this buffer, It's value[3].a of
+ * MTK_TZCMD_SECMEM_ZALLOC.
+ * [out] value[1].a: return value, 0 means successful, otherwise fail.
+ */
+ MTK_TZCMD_SECMEM_FREE = 0x10001,
+
+ /*
+ * Get secure memory sg-list.
+ *
+ * [in] value[0].a: The secure handle of this buffer, It's value[3].a of
+ * MTK_TZCMD_SECMEM_ZALLOC.
+ * [out] value[1].a: The array of sg items (struct mtk_tee_scatterlist).
+ */
+ MTK_TZCMD_SECMEM_RETRIEVE_SG = 0x10002,
+};
+
struct mtk_restricted_heap_data {
struct tee_context *tee_ctx;
u32 tee_session;
@@ -76,6 +116,155 @@ static int mtk_tee_session_init(struct mtk_restricted_heap_data *data)
return ret;
}
+static int mtk_tee_service_call(struct tee_context *tee_ctx, u32 session,
+ unsigned int command, struct tee_param *params)
+{
+ struct tee_ioctl_invoke_arg arg = {0};
+ int ret;
+
+ arg.num_params = TEE_PARAM_NUM;
+ arg.session = session;
+ arg.func = command;
+
+ ret = tee_client_invoke_func(tee_ctx, &arg, params);
+ if (ret < 0 || arg.ret) {
+ pr_err("%s: cmd 0x%x ret %d:%x.\n", __func__, command, ret, arg.ret);
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static int mtk_tee_secmem_free(struct restricted_heap *rheap, u64 restricted_addr)
+{
+ struct mtk_restricted_heap_data *data = rheap->priv_data;
+ struct tee_param params[TEE_PARAM_NUM] = {0};
+
+ params[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ params[0].u.value.a = restricted_addr;
+ params[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+
+ mtk_tee_service_call(data->tee_ctx, data->tee_session,
+ MTK_TZCMD_SECMEM_FREE, params);
+ if (params[1].u.value.a) {
+ pr_err("%s, SECMEM_FREE buffer(0x%llx) fail(%lld) from TEE.\n",
+ rheap->name, restricted_addr, params[1].u.value.a);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_tee_restrict_memory(struct restricted_heap *rheap, struct restricted_buffer *buf)
+{
+ struct mtk_restricted_heap_data *data = rheap->priv_data;
+ struct tee_param params[TEE_PARAM_NUM] = {0};
+ struct mtk_tee_scatterlist *tee_sg_item;
+ struct mtk_tee_scatterlist *tee_sg_buf;
+ unsigned int sg_num, size, i;
+ struct tee_shm *sg_shm;
+ struct scatterlist *sg;
+ phys_addr_t pa_tee;
+ u64 r_addr;
+ int ret;
+
+ /* Alloc the secure buffer and get the sg-list number from TEE */
+ params[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ params[0].u.value.a = buf->size;
+ params[0].u.value.b = PAGE_SIZE;
+ params[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ params[1].u.value.a = data->mem_type;
+ params[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+ params[3].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+ ret = mtk_tee_service_call(data->tee_ctx, data->tee_session,
+ MTK_TZCMD_SECMEM_ZALLOC, params);
+ if (ret)
+ return -ENOMEM;
+
+ sg_num = params[2].u.value.a;
+ r_addr = params[3].u.value.a;
+
+ /* If there is only one entry, It means the buffer is continuous, Get the PA directly. */
+ if (sg_num == 1) {
+ pa_tee = params[2].u.value.b;
+ if (!pa_tee)
+ goto tee_secmem_free;
+ if (sg_alloc_table(&buf->sg_table, 1, GFP_KERNEL))
+ goto tee_secmem_free;
+ sg_set_page(buf->sg_table.sgl, phys_to_page(pa_tee), buf->size, 0);
+ buf->restricted_addr = r_addr;
+ return 0;
+ }
+
+ /*
+ * If the buffer inside TEE are discontinuous, Use sharemem to retrieve
+ * the detail sg list from TEE.
+ */
+ tee_sg_buf = kmalloc_array(sg_num, sizeof(*tee_sg_item), GFP_KERNEL);
+ if (!tee_sg_buf) {
+ ret = -ENOMEM;
+ goto tee_secmem_free;
+ }
+
+ size = sg_num * sizeof(*tee_sg_item);
+ sg_shm = tee_shm_register_kernel_buf(data->tee_ctx, tee_sg_buf, size);
+ if (!sg_shm)
+ goto free_tee_sg_buf;
+
+ memset(params, 0, sizeof(params));
+ params[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ params[0].u.value.a = r_addr;
+ params[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+ params[1].u.memref.shm = sg_shm;
+ params[1].u.memref.size = size;
+ ret = mtk_tee_service_call(data->tee_ctx, data->tee_session,
+ MTK_TZCMD_SECMEM_RETRIEVE_SG, params);
+ if (ret)
+ goto put_shm;
+
+ if (sg_alloc_table(&buf->sg_table, sg_num, GFP_KERNEL))
+ goto put_shm;
+
+ for_each_sgtable_sg(&buf->sg_table, sg, i) {
+ tee_sg_item = tee_sg_buf + i;
+ if (!tee_sg_item->pa)
+ goto free_buf_sg;
+ sg_set_page(sg, phys_to_page(tee_sg_item->pa),
+ tee_sg_item->length, 0);
+ }
+
+ tee_shm_put(sg_shm);
+ kfree(tee_sg_buf);
+ buf->restricted_addr = r_addr;
+ return 0;
+
+free_buf_sg:
+ sg_free_table(&buf->sg_table);
+put_shm:
+ tee_shm_put(sg_shm);
+free_tee_sg_buf:
+ kfree(tee_sg_buf);
+tee_secmem_free:
+ mtk_tee_secmem_free(rheap, r_addr);
+ return ret;
+}
+
+static void mtk_tee_unrestrict_memory(struct restricted_heap *rheap, struct restricted_buffer *buf)
+{
+ sg_free_table(&buf->sg_table);
+ mtk_tee_secmem_free(rheap, buf->restricted_addr);
+}
+
+static int
+mtk_restricted_memory_allocate(struct restricted_heap *rheap, struct restricted_buffer *buf)
+{
+ /* The memory allocating is within the TEE. */
+ return 0;
+}
+
+static void
+mtk_restricted_memory_free(struct restricted_heap *rheap, struct restricted_buffer *buf)
+{
+}
+
static int mtk_restricted_heap_init(struct restricted_heap *rheap)
{
struct mtk_restricted_heap_data *data = rheap->priv_data;
@@ -87,6 +276,10 @@ static int mtk_restricted_heap_init(struct restricted_heap *rheap)
static const struct restricted_heap_ops mtk_restricted_heap_ops = {
.heap_init = mtk_restricted_heap_init,
+ .alloc = mtk_restricted_memory_allocate,
+ .free = mtk_restricted_memory_free,
+ .restrict_buf = mtk_tee_restrict_memory,
+ .unrestrict_buf = mtk_tee_unrestrict_memory,
};
static struct mtk_restricted_heap_data mtk_restricted_heap_data = {
Add TEE service call for MediaTek heap. We have a limited number of hardware entries to protect memory, therefore we cannot protect memory arbitrarily, and our secure memory management is actually inside OPTEE. Totally there are 3 commands: 1) MTK_TZCMD_SECMEM_ZALLOC: The kernel tells the TEE what size I want and the TEE will return a "secure handle"/"secure address". To make the name more general, We call it "restricted_addr" here. The restricted_addr is a reference to the secure buffer within TEE. 2) MTK_TZCMD_SECMEM_FREE: Free the buffer. Match with the ALLOC command above. 3) MTK_TZCMD_SECMEM_RETRIEVE_SG: If the tee buffer is discrete, this command can retrieve the detailed PA list from the TEE with which the kernel will initialize the sg table. Of course, if the tee buffer is contiguous, the PA will be obtained directly from MTK_TZCMD_SECMEM_ZALLOC. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/dma-buf/heaps/restricted_heap.h | 3 + drivers/dma-buf/heaps/restricted_heap_mtk.c | 193 ++++++++++++++++++++ 2 files changed, 196 insertions(+)