@@ -1105,3 +1105,49 @@ dp0_out: endpoint {
};
};
};
+
+&serdes0 {
+ status = "okay";
+ serdes0_pcie1_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>,
+ <&serdes_wiz0 3>, <&serdes_wiz0 4>;
+ };
+};
+
+&serdes_wiz0 {
+ status = "okay";
+};
+
+&pcie1_rc {
+ status = "okay";
+ num-lanes = <2>;
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie1_link>;
+ phy-names = "pcie-phy";
+};
+
+&serdes1 {
+ status = "okay";
+ serdes1_pcie0_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+ };
+};
+
+&serdes_wiz1 {
+ status = "okay";
+};
+
+&pcie0_rc {
+ status = "okay";
+ reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes1_pcie0_link>;
+ phy-names = "pcie-phy";
+};
Enable PCIe0 and PCIe1 instances of PCIe in Root Complex mode of operation on J784S4 EVM. The lanes of PCIe0 are connected to Serdes1 instance of Serdes while the lanes of PCIe1 are connected to Serdes0 instance of Serdes in J784S4 SoC. Despite both PCIe instances supporting up to 4 Lanes, since the physical connections to the PCIe connector corresponding to the PCIe1 instance of PCIe are limited to 2 Lanes on the J784S4 EVM, update the "num-lanes" property of PCIe1 accordingly. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- v1: https://lore.kernel.org/r/20240129114749.1197579-3-s-vadapalli@ti.com/ Changes since v1: - NA arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 46 ++++++++++++++++++++++++ 1 file changed, 46 insertions(+)