diff mbox series

[RFC,v3,7/9] arm64: boot: dts: qcom: Use phandles for thermal_zones

Message ID 20240521-board-ids-v3-7-e6c71d05f4d2@quicinc.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: hwinfo: Introduce board-id | expand

Commit Message

Elliot Berman May 21, 2024, 6:38 p.m. UTC
In preparation for converting sm8550 to use devicetree overlays, use
phandles for thermal_zones.

Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
 arch/arm64/boot/dts/qcom/pm8010.dtsi    |  62 ++++++++--------
 arch/arm64/boot/dts/qcom/pm8550.dtsi    |  32 ++++----
 arch/arm64/boot/dts/qcom/pm8550b.dtsi   |  36 +++++----
 arch/arm64/boot/dts/qcom/pm8550ve.dtsi  |  38 +++++-----
 arch/arm64/boot/dts/qcom/pm8550vs.dtsi  | 128 ++++++++++++++++----------------
 arch/arm64/boot/dts/qcom/pmr735d_a.dtsi |  38 +++++-----
 arch/arm64/boot/dts/qcom/pmr735d_b.dtsi |  38 +++++-----
 arch/arm64/boot/dts/qcom/sm8550.dtsi    |   2 +-
 arch/arm64/boot/dts/qcom/sm8650.dtsi    |   2 +-
 9 files changed, 181 insertions(+), 195 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index 0ea641e12209..a889df2f2f25 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -6,47 +6,45 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pm8010-m-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+&thermal_zones {
+	pm8010-m-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8010_m_temp_alarm>;
+		thermal-sensors = <&pm8010_m_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
+	};
 
-		pm8010-n-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+	pm8010-n-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8010_n_temp_alarm>;
+		thermal-sensors = <&pm8010_n_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 797a18c249a4..cb5e70b28445 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -6,26 +6,24 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pm8550-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+&thermal_zones {
+	pm8550-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8550_temp_alarm>;
+		thermal-sensors = <&pm8550_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 72609f31c890..b3cfa030679a 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -6,26 +6,24 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pm8550b-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pm8550b_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+&thermal_zones {
+	pm8550b-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8550b_temp_alarm>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index 4dc1f03ab2c7..8ef57a51b5cd 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -6,26 +6,24 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pm8550ve-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pm8550ve_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+&thermal_zones {
+	pm8550ve-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8550ve_temp_alarm>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
index 97b1c18aa7d8..258526abcc21 100644
--- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -6,89 +6,87 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pm8550vs-c-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pm8550vs_c_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+&thermal_zones {
+	pm8550vs-c-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pm8550vs_c_temp_alarm>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
+	};
 
-		pm8550vs-d-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+	pm8550vs-d-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8550vs_d_temp_alarm>;
+		thermal-sensors = <&pm8550vs_d_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
+	};
 
-		pm8550vs-e-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+	pm8550vs-e-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8550vs_e_temp_alarm>;
+		thermal-sensors = <&pm8550vs_e_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
+	};
 
-		pm8550vs-g-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
+	pm8550vs-g-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
 
-			thermal-sensors = <&pm8550vs_g_temp_alarm>;
+		thermal-sensors = <&pm8550vs_g_temp_alarm>;
 
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
 
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 37daaefe3431..251a16424d84 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -6,26 +6,24 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pmr735d-k-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pmr735d_k_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+&thermal_zones {
+	pmr735d-k-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
index 3b470f6ac46f..dbcfeb53d8ec 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -6,26 +6,24 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-/ {
-	thermal-zones {
-		pmr735d-l-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pmr735d_l_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
+&thermal_zones {
+	pmr735d-l-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+
+		thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+		trips {
+			trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "hot";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee1ba5a8c8fc..c68e08747b6f 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4452,7 +4452,7 @@  compute-cb@8 {
 		};
 	};
 
-	thermal-zones {
+	thermal_zones: thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 2df77123a8c7..32198bf3cf7c 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -5030,7 +5030,7 @@  compute-cb@8 {
 		};
 	};
 
-	thermal-zones {
+	thermal_zones: thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;