diff mbox series

[v4,4/4] arm64: dts: mediatek: mt8188: add default thermal zones

Message ID 20240521-mtk-thermal-mt818x-dtsi-v4-4-b91ee678411c@baylibre.com (mailing list archive)
State New
Headers show
Series Mediatek thermal sensor driver support for MT8186 and MT8188 | expand

Commit Message

Julien Panis May 21, 2024, 2:05 p.m. UTC 
From: Nicolas Pitre <npitre@baylibre.com>

Inspired by the vendor kernel but adapted to the upstream thermal
driver version.

Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
 1 file changed, 432 insertions(+)

Comments

AngeloGioacchino Del Regno May 21, 2024, 2:19 p.m. UTC | #1 
Il 21/05/24 16:05, Julien Panis ha scritto:
> From: Nicolas Pitre <npitre@baylibre.com>
> 
> Inspired by the vendor kernel but adapted to the upstream thermal
> driver version.
> 
> Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
> Signed-off-by: Julien Panis <jpanis@baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
>   1 file changed, 432 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> index a9f1b9db54a6..2b0f3e03acc1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -12,6 +12,8 @@
>   #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
>   #include <dt-bindings/power/mediatek,mt8188-power.h>
>   #include <dt-bindings/reset/mt8188-resets.h>
> +#include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
>   
>   / {
>   	compatible = "mediatek,mt8188";

..snip..

> +
> +		gpu1-thermal {

You forgot to implement my feedback to Nicolas - this must be gpu-thermal

> +			polling-delay = <1000>;
> +			polling-delay-passive = <250>;
> +			thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
> +
> +			trips {
> +				gpu1_alert0: trip-alert0 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu1_alert1: trip-alert1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu1_crit: trip-crit {
> +					temperature = <100000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		gpu2-thermal {

...and for consistency with the other SoCs, this must be gpu1-thermal.

> +			polling-delay = <1000>;
> +			polling-delay-passive = <250>;
> +			thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
> +
> +			trips {
> +				gpu2_alert0: trip-alert0 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu2_alert1: trip-alert1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu2_crit: trip-crit {
> +					temperature = <100000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		soc1-thermal {

Any idea of what can "soc1" ever be? What measurement point is that?

VPU? IMG? INFRA?

soc1, soc2, soc3 make little sense.

Regards,
Angelo
Julien Panis May 21, 2024, 2:41 p.m. UTC | #2 
On 5/21/24 16:19, AngeloGioacchino Del Regno wrote:
> Il 21/05/24 16:05, Julien Panis ha scritto:
>> From: Nicolas Pitre <npitre@baylibre.com>
>>
>> Inspired by the vendor kernel but adapted to the upstream thermal
>> driver version.
>>
>> Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
>> Signed-off-by: Julien Panis <jpanis@baylibre.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
>>   1 file changed, 432 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> index a9f1b9db54a6..2b0f3e03acc1 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> @@ -12,6 +12,8 @@
>>   #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
>>   #include <dt-bindings/power/mediatek,mt8188-power.h>
>>   #include <dt-bindings/reset/mt8188-resets.h>
>> +#include <dt-bindings/thermal/thermal.h>
>> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
>>     / {
>>       compatible = "mediatek,mt8188";
>
> ..snip..
>
>> +
>> +        gpu1-thermal {
>
> You forgot to implement my feedback to Nicolas - this must be gpu-thermal

Sorry, I did not forget. I just did not understand correctly.
Even after looking at mt8195, I thought that only the '_'
in 'cpu_big0-thermal' and 'cpu_big1-thermal' were wrong
in v3. Thanks for making it clear.

>
>> +            polling-delay = <1000>;
>> +            polling-delay-passive = <250>;
>> +            thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
>> +
>> +            trips {
>> +                gpu1_alert0: trip-alert0 {
>> +                    temperature = <85000>;
>> +                    hysteresis = <2000>;
>> +                    type = "passive";
>> +                };
>> +
>> +                gpu1_alert1: trip-alert1 {
>> +                    temperature = <95000>;
>> +                    hysteresis = <2000>;
>> +                    type = "hot";
>> +                };
>> +
>> +                gpu1_crit: trip-crit {
>> +                    temperature = <100000>;
>> +                    hysteresis = <0>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        gpu2-thermal {
>
> ...and for consistency with the other SoCs, this must be gpu1-thermal.

Now I think I get it, thank you.

>
>> +            polling-delay = <1000>;
>> +            polling-delay-passive = <250>;
>> +            thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
>> +
>> +            trips {
>> +                gpu2_alert0: trip-alert0 {
>> +                    temperature = <85000>;
>> +                    hysteresis = <2000>;
>> +                    type = "passive";
>> +                };
>> +
>> +                gpu2_alert1: trip-alert1 {
>> +                    temperature = <95000>;
>> +                    hysteresis = <2000>;
>> +                    type = "hot";
>> +                };
>> +
>> +                gpu2_crit: trip-crit {
>> +                    temperature = <100000>;
>> +                    hysteresis = <0>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        soc1-thermal {
>
> Any idea of what can "soc1" ever be? What measurement point is that?
>
> VPU? IMG? INFRA?
>
> soc1, soc2, soc3 make little sense.

No idea to be honest. I'll try to find out that information
and will change that in v5.

Julien
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index a9f1b9db54a6..2b0f3e03acc1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -12,6 +12,8 @@ 
 #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
 #include <dt-bindings/power/mediatek,mt8188-power.h>
 #include <dt-bindings/reset/mt8188-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8188";
@@ -311,6 +313,436 @@  psci {
 		method = "smc";
 	};
 
+	thermal_zones: thermal-zones {
+		cpu-little0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu_little0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu_little1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu_little2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu_little3_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little3_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little3_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
+
+			trips {
+				cpu_big0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big0_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
+
+			trips {
+				cpu_big1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big1_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		apu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_APU>;
+
+			trips {
+				apu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				apu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				apu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
+
+			trips {
+				gpu1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
+
+			trips {
+				gpu2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_SOC1>;
+
+			trips {
+				soc1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_SOC2>;
+
+			trips {
+				soc2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_SOC3>;
+
+			trips {
+				soc3_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc3_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM1>;
+
+			trips {
+				cam1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM2>;
+
+			trips {
+				cam2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;