diff mbox series

[v5,2/2] arm64: dts: amlogic: Add Amlogic S4 PWM

Message ID 20240521-s4-pwm-v5-2-0c91f5fa32cd@amlogic.com (mailing list archive)
State New
Headers show
Series Add support for Amlogic S4 PWM | expand

Commit Message

Kelvin Zhang via B4 Relay May 21, 2024, 8:31 a.m. UTC
From: Junyi Zhao <junyi.zhao@amlogic.com>

Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
along with GPIO PIN configs of each channel.

Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 207 ++++++++++++++++++++++++++++++
 1 file changed, 207 insertions(+)

Comments

George Stark May 21, 2024, 10:17 p.m. UTC | #1
Hello Kelvin, Junyi

On 5/21/24 11:31, Kelvin Zhang via B4 Relay wrote:
> From: Junyi Zhao <junyi.zhao@amlogic.com>
> 
> Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
> along with GPIO PIN configs of each channel.
> 
> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 207 ++++++++++++++++++++++++++++++
>   1 file changed, 207 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> index 10896f9df682..d0c170368892 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -292,6 +292,168 @@ mux {
>   					};
>   				};
>   
...
> @@ -449,6 +611,51 @@ i2c4: i2c@6e000 {
>   				status = "disabled";
>   			};
>   
> +			pwm_ab: pwm@58000 {
> +				compatible = "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x58000 0x0 0x24>;
> +				clocks = <&clkc_periphs CLKID_PWM_A>,
> +						<&clkc_periphs CLKID_PWM_B>;
> +				#pwm-cells = <3>;
> +				status = "disabled";
> +			};
> +
> +			pwm_cd: pwm@5a000 {
> +				compatible = "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x5a000 0x0 0x24>;
> +				clocks = <&clkc_periphs CLKID_PWM_C>,
> +						<&clkc_periphs CLKID_PWM_D>;
> +				#pwm-cells = <3>;
> +				status = "disabled";
> +			};
> +
> +			pwm_ef: pwm@5c000 {
> +				compatible = "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x5c000 0x0 0x24>;
> +				clocks = <&clkc_periphs CLKID_PWM_E>,
> +						<&clkc_periphs CLKID_PWM_F>;
> +				#pwm-cells = <3>;
> +				status = "disabled";
> +			};
> +
> +			pwm_gh: pwm@5e000 {
> +				compatible = "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x5e000 0x0 0x24>;
> +				clocks = <&clkc_periphs CLKID_PWM_G>,
> +						<&clkc_periphs CLKID_PWM_H>;
> +				#pwm-cells = <3>;
> +				status = "disabled";
> +			};
> +
> +			pwm_ij: pwm@60000 {
> +				compatible = "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x60000 0x0 0x24>;
> +				clocks = <&clkc_periphs CLKID_PWM_I>,
> +						<&clkc_periphs CLKID_PWM_J>;
> +				#pwm-cells = <3>;
> +				status = "disabled";
> +			};
> +
>   			nand: nand-controller@8c800 {
>   				compatible = "amlogic,meson-axg-nfc";
>   				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
> 

Nodes on any bus, thus using unit addresses for children, shall be 
ordered by unit address in ascending order.

So the pwm_xx nodes should be placed between spicc0: spi@50000 and
i2c0: i2c@66000 nodes
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 10896f9df682..d0c170368892 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -292,6 +292,168 @@  mux {
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins: pwm-a-pins {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+						drive-strength-microamp = <500>;
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
 				nand_pins: nand-pins {
 					mux {
 						groups = "emmc_nand_d0",
@@ -449,6 +611,51 @@  i2c4: i2c@6e000 {
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+						<&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+						<&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+						<&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+						<&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+						<&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			nand: nand-controller@8c800 {
 				compatible = "amlogic,meson-axg-nfc";
 				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;