diff mbox series

usb: ucsi: stm32: fix command completion handling

Message ID 20240521151109.3078775-1-fabrice.gasnier@foss.st.com (mailing list archive)
State New, archived
Headers show
Series usb: ucsi: stm32: fix command completion handling | expand

Commit Message

Fabrice Gasnier May 21, 2024, 3:11 p.m. UTC
Sometimes errors are seen, when doing DR swap, like:
[   24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
[   24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
 GET_CONNECTOR_STATUS failed (-5)

There may be some race, which lead to read CCI, before the command complete
flag is set, hence returning -EIO. Similar fix has been done also in
ucsi_acpi [1].

In case of a spurious or otherwise delayed notification it is
possible that CCI still reports the previous completion. The
UCSI spec is aware of this and provides two completion bits in
CCI, one for normal commands and one for acks. As acks and commands
alternate the notification handler can determine if the completion
bit is from the current command.

To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
commands if the completion bit matches.

[1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/

Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
 drivers/usb/typec/ucsi/ucsi_stm32g0.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

Comments

Greg Kroah-Hartman May 21, 2024, 3:21 p.m. UTC | #1
On Tue, May 21, 2024 at 05:11:09PM +0200, Fabrice Gasnier wrote:
> Sometimes errors are seen, when doing DR swap, like:
> [   24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
> [   24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
>  GET_CONNECTOR_STATUS failed (-5)
> 
> There may be some race, which lead to read CCI, before the command complete
> flag is set, hence returning -EIO. Similar fix has been done also in
> ucsi_acpi [1].
> 
> In case of a spurious or otherwise delayed notification it is
> possible that CCI still reports the previous completion. The
> UCSI spec is aware of this and provides two completion bits in
> CCI, one for normal commands and one for acks. As acks and commands
> alternate the notification handler can determine if the completion
> bit is from the current command.
> 
> To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
> commands if the completion bit matches.
> 
> [1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/
> 
> Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
>  drivers/usb/typec/ucsi/ucsi_stm32g0.c | 18 ++++++++++++++----
>  1 file changed, 14 insertions(+), 4 deletions(-)

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
Dmitry Baryshkov May 26, 2024, 8:06 a.m. UTC | #2
On Tue, May 21, 2024 at 05:11:09PM +0200, Fabrice Gasnier wrote:
> Sometimes errors are seen, when doing DR swap, like:
> [   24.672481] ucsi-stm32g0-i2c 0-0035: UCSI_GET_PDOS failed (-5)
> [   24.720188] ucsi-stm32g0-i2c 0-0035: ucsi_handle_connector_change:
>  GET_CONNECTOR_STATUS failed (-5)
> 
> There may be some race, which lead to read CCI, before the command complete
> flag is set, hence returning -EIO. Similar fix has been done also in
> ucsi_acpi [1].
> 
> In case of a spurious or otherwise delayed notification it is
> possible that CCI still reports the previous completion. The
> UCSI spec is aware of this and provides two completion bits in
> CCI, one for normal commands and one for acks. As acks and commands
> alternate the notification handler can determine if the completion
> bit is from the current command.
> 
> To fix this add the ACK_PENDING bit for ucsi_stm32g0 and only complete
> commands if the completion bit matches.
> 
> [1] https://lore.kernel.org/lkml/20240121204123.275441-3-lk@c--e.de/
> 
> Fixes: 72849d4fcee7 ("usb: typec: ucsi: stm32g0: add support for stm32g0 controller")
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
>  drivers/usb/typec/ucsi/ucsi_stm32g0.c | 18 ++++++++++++++----
>  1 file changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> index 93d7806681cf..7d6576778dad 100644
> --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
> @@ -395,9 +395,13 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
>  				   size_t len)
>  {
>  	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
> +	bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
>  	int ret;
>  
> -	set_bit(COMMAND_PENDING, &g0->flags);
> +	if (ack)
> +		set_bit(ACK_PENDING, &g0->flags);

ACK_PENDING is not defined in the patch.

> +	else
> +		set_bit(COMMAND_PENDING, &g0->flags);
>  
>  	ret = ucsi_stm32g0_async_write(ucsi, offset, val, len);
>  	if (ret)
> @@ -405,9 +409,14 @@ static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
>  
>  	if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000)))
>  		ret = -ETIMEDOUT;
> +	else
> +		return 0;
>  
>  out_clear_bit:
> -	clear_bit(COMMAND_PENDING, &g0->flags);
> +	if (ack)
> +		clear_bit(ACK_PENDING, &g0->flags);
> +	else
> +		clear_bit(COMMAND_PENDING, &g0->flags);
>  
>  	return ret;
>  }
> @@ -428,8 +437,9 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
>  	if (UCSI_CCI_CONNECTOR(cci))
>  		ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
>  
> -	if (test_bit(COMMAND_PENDING, &g0->flags) &&
> -	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
> +	if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags))
> +		complete(&g0->complete);
> +	if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags))
>  		complete(&g0->complete);
>  
>  	return IRQ_HANDLED;
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
index 93d7806681cf..7d6576778dad 100644
--- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
+++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
@@ -395,9 +395,13 @@  static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
 				   size_t len)
 {
 	struct ucsi_stm32g0 *g0 = ucsi_get_drvdata(ucsi);
+	bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
 	int ret;
 
-	set_bit(COMMAND_PENDING, &g0->flags);
+	if (ack)
+		set_bit(ACK_PENDING, &g0->flags);
+	else
+		set_bit(COMMAND_PENDING, &g0->flags);
 
 	ret = ucsi_stm32g0_async_write(ucsi, offset, val, len);
 	if (ret)
@@ -405,9 +409,14 @@  static int ucsi_stm32g0_sync_write(struct ucsi *ucsi, unsigned int offset, const
 
 	if (!wait_for_completion_timeout(&g0->complete, msecs_to_jiffies(5000)))
 		ret = -ETIMEDOUT;
+	else
+		return 0;
 
 out_clear_bit:
-	clear_bit(COMMAND_PENDING, &g0->flags);
+	if (ack)
+		clear_bit(ACK_PENDING, &g0->flags);
+	else
+		clear_bit(COMMAND_PENDING, &g0->flags);
 
 	return ret;
 }
@@ -428,8 +437,9 @@  static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
 	if (UCSI_CCI_CONNECTOR(cci))
 		ucsi_connector_change(g0->ucsi, UCSI_CCI_CONNECTOR(cci));
 
-	if (test_bit(COMMAND_PENDING, &g0->flags) &&
-	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+	if (cci & UCSI_CCI_ACK_COMPLETE && test_and_clear_bit(ACK_PENDING, &g0->flags))
+		complete(&g0->complete);
+	if (cci & UCSI_CCI_COMMAND_COMPLETE && test_and_clear_bit(COMMAND_PENDING, &g0->flags))
 		complete(&g0->complete);
 
 	return IRQ_HANDLED;