@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2021 NXP
+ * Copyright 2021, 2024 NXP
*/
/dts-v1/;
@@ -19,6 +19,17 @@ memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ele_reserved: ele-reserved@90000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90000000 0 0x100000>;
+ no-map;
+ };
+ };
reserved-memory {
#address-cells = <2>;
@@ -146,6 +157,10 @@ &usdhc0 {
status = "okay";
};
+&ele_if0 {
+ memory-region = <&ele_reserved>;
+};
+
&fec {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_enet>;
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2021 NXP
+ * Copyright 2021, 2024 NXP
*/
#include <dt-bindings/clock/imx8ulp-clock.h>
@@ -152,7 +152,7 @@ sosc: clock-sosc {
#clock-cells = <0>;
};
- sram@2201f000 {
+ sram0: sram@2201f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
@@ -167,6 +167,8 @@ scmi_buf: scmi-sram-section@0 {
};
firmware {
+ #address-cells = <1>;
+ #size-cells = <0>;
scmi {
compatible = "arm,scmi-smc";
arm,smc-id = <0xc20000fe>;
@@ -184,6 +186,14 @@ scmi_sensor: protocol@15 {
#thermal-sensor-cells = <1>;
};
};
+
+ ele_if0: ele-if@0 {
+ compatible = "fsl,imx8ulp-ele";
+ reg = <0x0>;
+ mbox-names = "tx", "rx";
+ mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
+ sram = <&sram0>;
+ };
};
cm33: remoteproc-cm33 {
Add support for NXP secure enclave called EdgeLock Enclave firmware (se-fw) for imx8ulp-evk. EdgeLock Enclave has a hardware limitation of restricted access to DDR address: 0x80000000 to 0xAFFFFFFF, so reserve 1MB of DDR memory region from 0x80000000. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> --- arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 17 ++++++++++++++++- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 14 ++++++++++++-- 2 files changed, 28 insertions(+), 3 deletions(-)