@@ -662,32 +662,6 @@ usb0: usb@31000000 {
};
};
- usbss1: usb@f910000 {
- compatible = "ti,am62-usb";
- reg = <0x00 0x0f910000 0x00 0x800>,
- <0x00 0x0f918000 0x00 0x400>;
- clocks = <&k3_clks 162 3>;
- clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
- #address-cells = <2>;
- #size-cells = <2>;
- power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
- ranges;
- status = "disabled";
-
- usb1: usb@31100000 {
- compatible = "snps,dwc3";
- reg = <0x00 0x31100000 0x00 0x50000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
- interrupt-names = "host", "peripheral";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- snps,usb2-gadget-lpm-disable;
- snps,usb2-lpm-disable;
- };
- };
-
fss: bus@fc00000 {
compatible = "simple-bus";
reg = <0x00 0x0fc00000 0x00 0x70000>;
new file mode 100644
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the AM62P MAIN domain peripherals
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+ usbss1: usb@f910000 {
+ compatible = "ti,am62-usb";
+ reg = <0x00 0x0f910000 0x00 0x800>,
+ <0x00 0x0f918000 0x00 0x400>;
+ clocks = <&k3_clks 162 3>;
+ clock-names = "ref";
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+ ranges;
+ status = "disabled";
+
+ usb1: usb@31100000 {
+ compatible = "snps,dwc3";
+ reg = <0x00 0x31100000 0x00 0x50000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+ interrupt-names = "host", "peripheral";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ snps,usb2-gadget-lpm-disable;
+ snps,usb2-lpm-disable;
+ };
+ };
+};
@@ -9,6 +9,7 @@
/dts-v1/;
#include "k3-am62p-j722s-common.dtsi"
+#include "k3-am62p-main.dtsi"
/ {
cpus {
The USB1 instance of USB controller on AM62P is different from the USB1 instance of USB controller on J722S. Thus, move the USB1 instance from the shared "k3-am62p-j722s-common-main.dtsi" file to the AM62p specific "k3-am62p-main.dtsi" file. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- v4: https://lore.kernel.org/r/20240601121554.2860403-3-s-vadapalli@ti.com/ Changes since v4: - s/main/MAIN in k3-am62p-main.dtsi .../dts/ti/k3-am62p-j722s-common-main.dtsi | 26 -------------- arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 34 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62p5.dtsi | 1 + 3 files changed, 35 insertions(+), 26 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi