diff mbox series

[v2,1/3] dt-bindings: PCI: generic: Add ats-supported property

Message ID 20240607105415.2501934-3-jean-philippe@linaro.org (mailing list archive)
State New
Headers show
Series Enable PCIe ATS for devicetree boot | expand

Commit Message

Jean-Philippe Brucker June 7, 2024, 10:54 a.m. UTC 
Add a way for firmware to tell the OS that ATS is supported by the PCI
root complex. An endpoint with ATS enabled may send Translation Requests
and Translated Memory Requests, which look just like Normal Memory
Requests with a non-zero AT field. So a root controller that ignores the
AT field may simply forward the request to the IOMMU as a Normal Memory
Request, which could end badly. In any case, the endpoint will be
unusable.

The ats-supported property allows the OS to only enable ATS in endpoints
if the root controller can handle ATS requests. Only add the property to
pcie-host-ecam-generic for the moment. For non-generic root controllers,
availability of ATS can be inferred from the compatible string.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 Documentation/devicetree/bindings/pci/host-generic-pci.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index 3484e0b4b412e..bcfbaf5582cc9 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -110,6 +110,12 @@  properties:
   iommu-map-mask: true
   msi-parent: true
 
+  ats-supported:
+    description:
+      Indicates that a PCIe host controller supports ATS, and can handle Memory
+      Requests with Address Type (AT).
+    type: boolean
+
 required:
   - compatible
   - reg