diff mbox series

[v3,2/4] arm64: dts: freescale: Add support for the Variscite DART-MX8M-PLUS SoM

Message ID 20240608180447.31378-3-laurent.pinchart@ideasonboard.com (mailing list archive)
State New
Headers show
Series arm64: dts: freescale: Add Variscite i.MX8MP DART8MCustomBoard v2 | expand

Commit Message

Laurent Pinchart June 8, 2024, 6:04 p.m. UTC
The DART-MX8M-PLUS is an i.MX8MP-based SoM from Variscite. Add a device
tree file that models its core modules, based on the device tree from
Variscite's BSP.

Sound support has been stripped out, as the downstream and upstream DT
bindings differ for the related devices, and the schematics of the SoM
isn't publicly available to check how those devices are wired up.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---

Changes since v2:

- Move ethernet PHY GPIOs to separate pinctrl group
- Fix and document PMIC output voltages
- Add no-sd and no-sdio properties to usdhc3
- Set SION for I2C1 GPIO recovery pinctrl group
---
 .../boot/dts/freescale/imx8mp-var-dart.dtsi   | 340 ++++++++++++++++++
 1 file changed, 340 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi
new file mode 100644
index 000000000000..3b5bdddc7d52
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi
@@ -0,0 +1,340 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 NXP
+ * Copyright 2020-2021 Variscite Ltd.
+ * Copyright 2023 Ideas on Board Oy
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_eqos_phy: regulator-eqos-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "eqos-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eth_phy>;
+
+			eee-broken-1000t;
+			reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/*
+			 * Powers VDD_SOC. Set the output voltage range to the
+			 * typical values for the nominal and overdrive modes.
+			 */
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/*
+			 * Powers VDD_ARM. Set the output voltage range to the
+			 * typical values for the nominal, overdrive and super
+			 * overdrive modes.
+			 */
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/*
+			 * Likely powers various 3.3V peripherals. Set the
+			 * output voltage to 3.3V.
+			 */
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * Powers at least NVCC_SAI1_SAI5 and the ethernet PHY.
+			 * The boot loader sets it to 1.85V to fix an ethernet
+			 * PHY reset issue. Set the output voltage range to the
+			 * i.MX8MP operating range for 1.8V I/O.
+			 */
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * Likely powers NVCC_DRAM. The board uses LPDDR4, set
+			 * the output voltage to 1.1V.
+			 */
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* Powers NVCC_SAI1_SAI5. */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_eth_phy: ethphygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20					0x10
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x10
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15				0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x1c0
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC			0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK			0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00			0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00			0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK			0xd6
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC			0xd6
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK			0xd6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};