| Message ID | 20240613152425.1582059-3-peteryin.openbmc@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Revise Meta(Facebook) Harma BMC(AST2600) | expand |
Hi Peter, kernel test robot noticed the following build warnings: [auto build test WARNING on robh/for-next] [also build test WARNING on linus/master v6.10-rc3 next-20240613] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20240613152425.1582059-3-peteryin.openbmc%40gmail.com patch subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 dtschema version: 2024.6.dev1+g833054f reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202406170350.zQo7bJdX-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts:409.21-412.6: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: I2C bus unit address format error, expected "61" arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:655.36-659.7: Warning (unique_unit_address_if_enabled): /ahb/apb/lpc@1e789000/reset-controller@98: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/uart-routing@98) arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[58, 203, 0]], 'gpio-mosi': [[58, 204, 0]], 'gpio-miso': [[58, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[58, 200, 1]], 'tpmdev@0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# -- from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78d000: pinctrl-0: True is not of type 'array' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78f000: pinctrl-0: True is not of type 'array' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@80/pwm@5e: failed to match any schema with compatible: ['max31790'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@180/pwm@5e: failed to match any schema with compatible: ['max31790'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/power-monitor@69: failed to match any schema with compatible: ['pmbus'] >> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@61: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@62: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/ipmb@10: failed to match any schema with compatible: ['ipmb-dev'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml# vim +/61 +409 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts 387 388 &i2c13 { 389 status = "okay"; 390 391 i2c-mux@70 { 392 compatible = "nxp,pca9545"; 393 reg = <0x70>; 394 #address-cells = <1>; 395 #size-cells = <0>; 396 397 imux28: i2c@0 { 398 #address-cells = <1>; 399 #size-cells = <0>; 400 reg = <0>; 401 power-monitor@61 { 402 compatible = "isil,isl69260"; 403 reg = <0x61>; 404 }; 405 power-monitor@62 { 406 compatible = "isil,isl69260"; 407 reg = <0x62>; 408 }; > 409 power-monitor@63 { 410 compatible = "isil,isl69260"; 411 reg = <0x61>; 412 }; 413 power-monitor@64 { 414 compatible = "infineon,xdpe152c4"; 415 reg = <0x64>; 416 }; 417 power-monitor@66 { 418 compatible = "infineon,xdpe152c4"; 419 reg = <0x66>; 420 }; 421 power-monitor@68 { 422 compatible = "infineon,xdpe152c4"; 423 reg = <0x68>; 424 }; 425 }; 426 imux29: i2c@1 { 427 #address-cells = <1>; 428 #size-cells = <0>; 429 reg = <1>; 430 //MB FRU 431 eeprom@54 { 432 compatible = "atmel,24c64"; 433 reg = <0x54>; 434 }; 435 }; 436 imux30: i2c@2 { 437 #address-cells = <1>; 438 #size-cells = <0>; 439 reg = <2>; 440 }; 441 imux31: i2c@3 { 442 #address-cells = <1>; 443 #size-cells = <0>; 444 reg = <3>; 445 }; 446 }; 447 }; 448
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index 0d349ce1f3e6..ef5ffe190445 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -398,6 +398,30 @@ imux28: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + power-monitor@61 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@62 { + compatible = "isil,isl69260"; + reg = <0x62>; + }; + power-monitor@63 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@64 { + compatible = "infineon,xdpe152c4"; + reg = <0x64>; + }; + power-monitor@66 { + compatible = "infineon,xdpe152c4"; + reg = <0x66>; + }; + power-monitor@68 { + compatible = "infineon,xdpe152c4"; + reg = <0x68>; + }; }; imux29: i2c@1 { #address-cells = <1>;
Add isl69260, xdpe152c4 device Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)