diff mbox series

[v2,2/5] ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes

Message ID 20240625043525.279711-3-manikandan.m@microchip.com (mailing list archive)
State New, archived
Headers show
Series Convert Atmel PIO3 Pinctrl and GPIO bindings to yaml | expand

Commit Message

Manikandan Muralidharan June 25, 2024, 4:35 a.m. UTC 
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the additional compatible string from the
pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation.

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
 arch/arm/boot/dts/microchip/at91sam9n12.dtsi | 2 +-
 arch/arm/boot/dts/microchip/at91sam9x5.dtsi  | 2 +-
 arch/arm/boot/dts/microchip/sam9x60.dtsi     | 2 +-
 arch/arm/boot/dts/microchip/sama5d3.dtsi     | 2 +-
 arch/arm/boot/dts/microchip/sama5d4.dtsi     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
index 9aa22195051d..844bd50943fc 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -226,7 +226,7 @@  dma: dma-controller@ffffec00 {
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
index d41d7c844200..27c1f2861cc3 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -202,7 +202,7 @@  dma1: dma-controller@ffffee00 {
 			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				/* shared pinctrl settings */
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 4e71ae63edf1..797855e78058 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -1223,7 +1223,7 @@  AT91_XDMAC_DT_PERID(28))>,
 			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
+				compatible = "microchip,sam9x60-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index f1614dcd7d28..39865133aa56 100644
--- a/arch/arm/boot/dts/microchip/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -493,7 +493,7 @@  aic: interrupt-controller@fffff000 {
 			pinctrl: pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 				atmel,mux-mask = <
 					/*   A          B          C  */
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index 69dd4e7b4c14..b253ba33fc38 100644
--- a/arch/arm/boot/dts/microchip/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -791,7 +791,7 @@  dbgu: serial@fc069000 {
 			pinctrl: pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfc068000 0xfc068000 0x100
 					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */