diff mbox series

[v2] iommu/arm-smmu: Pretty-print context fault related regs

Message ID 20240626163842.205631-1-robdclark@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2] iommu/arm-smmu: Pretty-print context fault related regs | expand

Commit Message

Rob Clark June 26, 2024, 4:38 p.m. UTC
From: Rob Clark <robdclark@chromium.org>

Parse out the bitfields for easier-to-read fault messages.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
I kept with the dev_err, which matches qcom_smmu_context_fault.  It is
only adding two extra lines, and it is ratelimited.

I also converted qcom_smmu_context_fault() to use the helpers to do the
parsing, rather than more or less duplicating.

 .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  | 21 +++---
 drivers/iommu/arm/arm-smmu/arm-smmu.c         | 70 ++++++++++++++++++-
 drivers/iommu/arm/arm-smmu/arm-smmu.h         | 58 +++++++++------
 3 files changed, 110 insertions(+), 39 deletions(-)

Comments

Pranjal Shrivastava June 26, 2024, 7:08 p.m. UTC | #1
Hi Rob,


On Wed, Jun 26, 2024 at 10:08 PM Rob Clark <robdclark@gmail.com> wrote:
>
> From: Rob Clark <robdclark@chromium.org>
>
> Parse out the bitfields for easier-to-read fault messages.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
> I kept with the dev_err, which matches qcom_smmu_context_fault.  It is
> only adding two extra lines, and it is ratelimited.
>
> I also converted qcom_smmu_context_fault() to use the helpers to do the
> parsing, rather than more or less duplicating.
>
>  .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  | 21 +++---
>  drivers/iommu/arm/arm-smmu/arm-smmu.c         | 70 ++++++++++++++++++-
>  drivers/iommu/arm/arm-smmu/arm-smmu.h         | 58 +++++++++------
>  3 files changed, 110 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> index 552199cbd9e2..ee7eab273e1a 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> @@ -429,22 +429,17 @@ irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
>                 phys_addr_t phys_atos = qcom_smmu_verify_fault(smmu_domain, iova, fsr);
>
>                 if (__ratelimit(&_rs)) {
> +                       char buf[80];

Super Nit: I'm not a fan of hardcoding the buffer size but I'm also not sure
if this makes a strong enough case for a macro definition. Any thoughts, anyone?

> +
>                         dev_err(smmu->dev,
>                                 "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
>                                 fsr, iova, fsynr, cbfrsynra, idx);
> -                       dev_err(smmu->dev,
> -                               "FSR    = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
> -                               fsr,
> -                               (fsr & 0x02) ? "TF " : "",
> -                               (fsr & 0x04) ? "AFF " : "",
> -                               (fsr & 0x08) ? "PF " : "",
> -                               (fsr & 0x10) ? "EF " : "",
> -                               (fsr & 0x20) ? "TLBMCF " : "",
> -                               (fsr & 0x40) ? "TLBLKF " : "",
> -                               (fsr & 0x80) ? "MHF " : "",
> -                               (fsr & 0x40000000) ? "SS " : "",
> -                               (fsr & 0x80000000) ? "MULTI " : "",
> -                               cbfrsynra);
> +
> +                       arm_smmu_parse_fsr(buf, fsr);
> +                       dev_err(smmu->dev, "FSR: %s\n", buf);
> +
> +                       arm_smmu_parse_fsynr0(buf, fsynr);
> +                       dev_err(smmu->dev, "FSYNR0: %s\n", buf);
>
>                         dev_err(smmu->dev,
>                                 "soft iova-to-phys=%pa\n", &phys_soft);
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> index 87c81f75cf84..7f5ca75d5ebe 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> @@ -405,12 +405,67 @@ static const struct iommu_flush_ops arm_smmu_s2_tlb_ops_v1 = {
>         .tlb_add_page   = arm_smmu_tlb_add_page_s2_v1,
>  };
>
> +void arm_smmu_parse_fsr(char buf[80], u32 fsr)
> +{
> +       static const struct {
> +               u32 mask;
> +               const char *name;
> +       } fsr_bits[] = {
> +               { ARM_SMMU_CB_FSR_MULTI,  "MULTI"  },
> +               { ARM_SMMU_CB_FSR_SS,     "SS"     },
> +               { ARM_SMMU_CB_FSR_UUT,    "UUT"    },
> +               { ARM_SMMU_CB_FSR_ASF,    "ASF"    },
> +               { ARM_SMMU_CB_FSR_TLBLKF, "TLBLKF" },
> +               { ARM_SMMU_CB_FSR_TLBMCF, "TLBMCF" },
> +               { ARM_SMMU_CB_FSR_EF,     "EF"     },
> +               { ARM_SMMU_CB_FSR_PF,     "PF"     },
> +               { ARM_SMMU_CB_FSR_AFF,    "AFF"    },
> +               { ARM_SMMU_CB_FSR_TF,     "TF"     },
> +       };
> +       char *p = buf;
> +
> +       p += sprintf(p, "FORMAT=%u",
> +                    (u32)FIELD_GET(ARM_SMMU_CB_FSR_FORMAT, fsr));
> +
> +       for (int i = 0; i < ARRAY_SIZE(fsr_bits); i++)
> +               if (fsr & fsr_bits[i].mask)
> +                       p += sprintf(p, "|%s", fsr_bits[i].name);
> +}

Buffer overflow alert: I suggest passing the buffer size as an
additional "size" parameter to the function.
Based on that size parameter, we must ensure that `p` doesn't reach
out of bounds.
Maybe using snprintf() to limit the num of characters to the "size"
parameter would make more sense.

> +
> +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr)

Ditto, for this function and also for the signatures in the .h file.


> +{
> +       static const struct {
> +               u32 mask;
> +               const char *name;
> +       } fsynr0_bits[] = {
> +               { ARM_SMMU_CB_FSYNR0_WNR,    "WNR"    },
> +               { ARM_SMMU_CB_FSYNR0_PNU,    "PNU"    },
> +               { ARM_SMMU_CB_FSYNR0_IND,    "IND"    },
> +               { ARM_SMMU_CB_FSYNR0_NSATTR, "NSATTR" },
> +               { ARM_SMMU_CB_FSYNR0_PTWF,   "PTWF"   },
> +               { ARM_SMMU_CB_FSYNR0_AFR,    "AFR"    },
> +       };
> +       char *p = buf;
> +
> +       p += sprintf(p, "S1CBNDX=%u",
> +                    (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_S1CBNDX, fsynr));
> +
> +       for (int i = 0; i < ARRAY_SIZE(fsynr0_bits); i++)
> +               if (fsynr & fsynr0_bits[i].mask)
> +                       p += sprintf(p, "|%s", fsynr0_bits[i].name);
> +
> +       p += sprintf(p, "|PLVL=%u",
> +                    (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_PLVL, fsynr));
> +}
> +
>  static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>  {
>         u32 fsr, fsynr, cbfrsynra;
>         unsigned long iova;
>         struct arm_smmu_domain *smmu_domain = dev;
>         struct arm_smmu_device *smmu = smmu_domain->smmu;
> +       static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
> +                                     DEFAULT_RATELIMIT_BURST);
>         int idx = smmu_domain->cfg.cbndx;
>         int ret;
>
> @@ -423,13 +478,22 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>         cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
>
>         ret = report_iommu_fault(&smmu_domain->domain, NULL, iova,
> -               fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> +               fsynr & ARM_SMMU_CB_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> +
> +       if (ret == -ENOSYS && __ratelimit(&rs)) {
> +               char buf[80];
>
> -       if (ret == -ENOSYS)
> -               dev_err_ratelimited(smmu->dev,
> +               dev_err(smmu->dev,
>                 "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
>                             fsr, iova, fsynr, cbfrsynra, idx);
>
> +               arm_smmu_parse_fsr(buf, fsr);
> +               dev_err(smmu->dev, "FSR: %s\n", buf);
> +
> +               arm_smmu_parse_fsynr0(buf, fsynr);
> +               dev_err(smmu->dev, "FSYNR0: %s\n", buf);
> +       }
> +
>         arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
>         return IRQ_HANDLED;
>  }
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> index 4765c6945c34..763ea52fca64 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> @@ -196,34 +196,46 @@ enum arm_smmu_cbar_type {
>  #define ARM_SMMU_CB_PAR_F              BIT(0)
>
>  #define ARM_SMMU_CB_FSR                        0x58
> -#define ARM_SMMU_FSR_MULTI             BIT(31)
> -#define ARM_SMMU_FSR_SS                        BIT(30)
> -#define ARM_SMMU_FSR_UUT               BIT(8)
> -#define ARM_SMMU_FSR_ASF               BIT(7)
> -#define ARM_SMMU_FSR_TLBLKF            BIT(6)
> -#define ARM_SMMU_FSR_TLBMCF            BIT(5)
> -#define ARM_SMMU_FSR_EF                        BIT(4)
> -#define ARM_SMMU_FSR_PF                        BIT(3)
> -#define ARM_SMMU_FSR_AFF               BIT(2)
> -#define ARM_SMMU_FSR_TF                        BIT(1)
> -
> -#define ARM_SMMU_FSR_IGN               (ARM_SMMU_FSR_AFF |             \
> -                                        ARM_SMMU_FSR_ASF |             \
> -                                        ARM_SMMU_FSR_TLBMCF |          \
> -                                        ARM_SMMU_FSR_TLBLKF)
> -
> -#define ARM_SMMU_FSR_FAULT             (ARM_SMMU_FSR_MULTI |           \
> -                                        ARM_SMMU_FSR_SS |              \
> -                                        ARM_SMMU_FSR_UUT |             \
> -                                        ARM_SMMU_FSR_EF |              \
> -                                        ARM_SMMU_FSR_PF |              \
> -                                        ARM_SMMU_FSR_TF |              \
> +#define ARM_SMMU_CB_FSR_MULTI          BIT(31)
> +#define ARM_SMMU_CB_FSR_SS             BIT(30)
> +#define ARM_SMMU_CB_FSR_FORMAT         GENMASK(10, 9)
> +#define ARM_SMMU_CB_FSR_UUT            BIT(8)
> +#define ARM_SMMU_CB_FSR_ASF            BIT(7)
> +#define ARM_SMMU_CB_FSR_TLBLKF         BIT(6)
> +#define ARM_SMMU_CB_FSR_TLBMCF         BIT(5)
> +#define ARM_SMMU_CB_FSR_EF             BIT(4)
> +#define ARM_SMMU_CB_FSR_PF             BIT(3)
> +#define ARM_SMMU_CB_FSR_AFF            BIT(2)
> +#define ARM_SMMU_CB_FSR_TF             BIT(1)
> +
> +void arm_smmu_parse_fsr(char buf[80], u32 fsr);
> +
> +#define ARM_SMMU_FSR_IGN               (ARM_SMMU_CB_FSR_AFF |          \
> +                                        ARM_SMMU_CB_FSR_ASF |          \
> +                                        ARM_SMMU_CB_FSR_TLBMCF |       \
> +                                        ARM_SMMU_CB_FSR_TLBLKF)
> +
> +#define ARM_SMMU_FSR_FAULT             (ARM_SMMU_CB_FSR_MULTI |        \
> +                                        ARM_SMMU_CB_FSR_SS |           \
> +                                        ARM_SMMU_CB_FSR_UUT |          \
> +                                        ARM_SMMU_CB_FSR_EF |           \
> +                                        ARM_SMMU_CB_FSR_PF |           \
> +                                        ARM_SMMU_CB_FSR_TF |           \
>                                          ARM_SMMU_FSR_IGN)
>
>  #define ARM_SMMU_CB_FAR                        0x60
>
>  #define ARM_SMMU_CB_FSYNR0             0x68
> -#define ARM_SMMU_FSYNR0_WNR            BIT(4)
> +#define ARM_SMMU_CB_FSYNR0_PLVL                GENMASK(1, 0)
> +#define ARM_SMMU_CB_FSYNR0_WNR         BIT(4)
> +#define ARM_SMMU_CB_FSYNR0_PNU         BIT(5)
> +#define ARM_SMMU_CB_FSYNR0_IND         BIT(6)
> +#define ARM_SMMU_CB_FSYNR0_NSATTR      BIT(8)
> +#define ARM_SMMU_CB_FSYNR0_PTWF                BIT(10)
> +#define ARM_SMMU_CB_FSYNR0_AFR         BIT(11)
> +#define ARM_SMMU_CB_FSYNR0_S1CBNDX     GENMASK(23, 16)
> +
> +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr);

Apart from the buffer overflow, everything else looks fine to me.

>
>  #define ARM_SMMU_CB_FSYNR1             0x6c
>
> --
> 2.45.2
>
Rob Clark June 26, 2024, 7:42 p.m. UTC | #2
On Wed, Jun 26, 2024 at 12:08 PM Pranjal Shrivastava <praan@google.com> wrote:
>
> Hi Rob,
>
>
> On Wed, Jun 26, 2024 at 10:08 PM Rob Clark <robdclark@gmail.com> wrote:
> >
> > From: Rob Clark <robdclark@chromium.org>
> >
> > Parse out the bitfields for easier-to-read fault messages.
> >
> > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > ---
> > I kept with the dev_err, which matches qcom_smmu_context_fault.  It is
> > only adding two extra lines, and it is ratelimited.
> >
> > I also converted qcom_smmu_context_fault() to use the helpers to do the
> > parsing, rather than more or less duplicating.
> >
> >  .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  | 21 +++---
> >  drivers/iommu/arm/arm-smmu/arm-smmu.c         | 70 ++++++++++++++++++-
> >  drivers/iommu/arm/arm-smmu/arm-smmu.h         | 58 +++++++++------
> >  3 files changed, 110 insertions(+), 39 deletions(-)
> >
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> > index 552199cbd9e2..ee7eab273e1a 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> > @@ -429,22 +429,17 @@ irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
> >                 phys_addr_t phys_atos = qcom_smmu_verify_fault(smmu_domain, iova, fsr);
> >
> >                 if (__ratelimit(&_rs)) {
> > +                       char buf[80];
>
> Super Nit: I'm not a fan of hardcoding the buffer size but I'm also not sure
> if this makes a strong enough case for a macro definition. Any thoughts, anyone?
>
> > +
> >                         dev_err(smmu->dev,
> >                                 "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
> >                                 fsr, iova, fsynr, cbfrsynra, idx);
> > -                       dev_err(smmu->dev,
> > -                               "FSR    = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
> > -                               fsr,
> > -                               (fsr & 0x02) ? "TF " : "",
> > -                               (fsr & 0x04) ? "AFF " : "",
> > -                               (fsr & 0x08) ? "PF " : "",
> > -                               (fsr & 0x10) ? "EF " : "",
> > -                               (fsr & 0x20) ? "TLBMCF " : "",
> > -                               (fsr & 0x40) ? "TLBLKF " : "",
> > -                               (fsr & 0x80) ? "MHF " : "",
> > -                               (fsr & 0x40000000) ? "SS " : "",
> > -                               (fsr & 0x80000000) ? "MULTI " : "",
> > -                               cbfrsynra);
> > +
> > +                       arm_smmu_parse_fsr(buf, fsr);
> > +                       dev_err(smmu->dev, "FSR: %s\n", buf);
> > +
> > +                       arm_smmu_parse_fsynr0(buf, fsynr);
> > +                       dev_err(smmu->dev, "FSYNR0: %s\n", buf);
> >
> >                         dev_err(smmu->dev,
> >                                 "soft iova-to-phys=%pa\n", &phys_soft);
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> > index 87c81f75cf84..7f5ca75d5ebe 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> > @@ -405,12 +405,67 @@ static const struct iommu_flush_ops arm_smmu_s2_tlb_ops_v1 = {
> >         .tlb_add_page   = arm_smmu_tlb_add_page_s2_v1,
> >  };
> >
> > +void arm_smmu_parse_fsr(char buf[80], u32 fsr)
> > +{
> > +       static const struct {
> > +               u32 mask;
> > +               const char *name;
> > +       } fsr_bits[] = {
> > +               { ARM_SMMU_CB_FSR_MULTI,  "MULTI"  },
> > +               { ARM_SMMU_CB_FSR_SS,     "SS"     },
> > +               { ARM_SMMU_CB_FSR_UUT,    "UUT"    },
> > +               { ARM_SMMU_CB_FSR_ASF,    "ASF"    },
> > +               { ARM_SMMU_CB_FSR_TLBLKF, "TLBLKF" },
> > +               { ARM_SMMU_CB_FSR_TLBMCF, "TLBMCF" },
> > +               { ARM_SMMU_CB_FSR_EF,     "EF"     },
> > +               { ARM_SMMU_CB_FSR_PF,     "PF"     },
> > +               { ARM_SMMU_CB_FSR_AFF,    "AFF"    },
> > +               { ARM_SMMU_CB_FSR_TF,     "TF"     },
> > +       };
> > +       char *p = buf;
> > +
> > +       p += sprintf(p, "FORMAT=%u",
> > +                    (u32)FIELD_GET(ARM_SMMU_CB_FSR_FORMAT, fsr));
> > +
> > +       for (int i = 0; i < ARRAY_SIZE(fsr_bits); i++)
> > +               if (fsr & fsr_bits[i].mask)
> > +                       p += sprintf(p, "|%s", fsr_bits[i].name);
> > +}
>
> Buffer overflow alert: I suggest passing the buffer size as an
> additional "size" parameter to the function.
> Based on that size parameter, we must ensure that `p` doesn't reach
> out of bounds.
> Maybe using snprintf() to limit the num of characters to the "size"
> parameter would make more sense.

I thought about this, but decided that, since nothing about the string
length is attacker controlled, and there were really only two users,
the simpler "just make the buffer big enough" approach would be fine.
It isn't like there will be a whole bunch more bitfields added.

Perhaps I should just add a #define for buf length, and a WARN_ON() if
that is exceeded.  That plus a selftest which calls both the fxns with
register value of ~0 should be enough to prevent any future change
from introducing an overflow.

BR,
-R

> > +
> > +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr)
>
> Ditto, for this function and also for the signatures in the .h file.
>
>
> > +{
> > +       static const struct {
> > +               u32 mask;
> > +               const char *name;
> > +       } fsynr0_bits[] = {
> > +               { ARM_SMMU_CB_FSYNR0_WNR,    "WNR"    },
> > +               { ARM_SMMU_CB_FSYNR0_PNU,    "PNU"    },
> > +               { ARM_SMMU_CB_FSYNR0_IND,    "IND"    },
> > +               { ARM_SMMU_CB_FSYNR0_NSATTR, "NSATTR" },
> > +               { ARM_SMMU_CB_FSYNR0_PTWF,   "PTWF"   },
> > +               { ARM_SMMU_CB_FSYNR0_AFR,    "AFR"    },
> > +       };
> > +       char *p = buf;
> > +
> > +       p += sprintf(p, "S1CBNDX=%u",
> > +                    (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_S1CBNDX, fsynr));
> > +
> > +       for (int i = 0; i < ARRAY_SIZE(fsynr0_bits); i++)
> > +               if (fsynr & fsynr0_bits[i].mask)
> > +                       p += sprintf(p, "|%s", fsynr0_bits[i].name);
> > +
> > +       p += sprintf(p, "|PLVL=%u",
> > +                    (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_PLVL, fsynr));
> > +}
> > +
> >  static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> >  {
> >         u32 fsr, fsynr, cbfrsynra;
> >         unsigned long iova;
> >         struct arm_smmu_domain *smmu_domain = dev;
> >         struct arm_smmu_device *smmu = smmu_domain->smmu;
> > +       static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
> > +                                     DEFAULT_RATELIMIT_BURST);
> >         int idx = smmu_domain->cfg.cbndx;
> >         int ret;
> >
> > @@ -423,13 +478,22 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
> >         cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
> >
> >         ret = report_iommu_fault(&smmu_domain->domain, NULL, iova,
> > -               fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> > +               fsynr & ARM_SMMU_CB_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> > +
> > +       if (ret == -ENOSYS && __ratelimit(&rs)) {
> > +               char buf[80];
> >
> > -       if (ret == -ENOSYS)
> > -               dev_err_ratelimited(smmu->dev,
> > +               dev_err(smmu->dev,
> >                 "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
> >                             fsr, iova, fsynr, cbfrsynra, idx);
> >
> > +               arm_smmu_parse_fsr(buf, fsr);
> > +               dev_err(smmu->dev, "FSR: %s\n", buf);
> > +
> > +               arm_smmu_parse_fsynr0(buf, fsynr);
> > +               dev_err(smmu->dev, "FSYNR0: %s\n", buf);
> > +       }
> > +
> >         arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
> >         return IRQ_HANDLED;
> >  }
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > index 4765c6945c34..763ea52fca64 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > @@ -196,34 +196,46 @@ enum arm_smmu_cbar_type {
> >  #define ARM_SMMU_CB_PAR_F              BIT(0)
> >
> >  #define ARM_SMMU_CB_FSR                        0x58
> > -#define ARM_SMMU_FSR_MULTI             BIT(31)
> > -#define ARM_SMMU_FSR_SS                        BIT(30)
> > -#define ARM_SMMU_FSR_UUT               BIT(8)
> > -#define ARM_SMMU_FSR_ASF               BIT(7)
> > -#define ARM_SMMU_FSR_TLBLKF            BIT(6)
> > -#define ARM_SMMU_FSR_TLBMCF            BIT(5)
> > -#define ARM_SMMU_FSR_EF                        BIT(4)
> > -#define ARM_SMMU_FSR_PF                        BIT(3)
> > -#define ARM_SMMU_FSR_AFF               BIT(2)
> > -#define ARM_SMMU_FSR_TF                        BIT(1)
> > -
> > -#define ARM_SMMU_FSR_IGN               (ARM_SMMU_FSR_AFF |             \
> > -                                        ARM_SMMU_FSR_ASF |             \
> > -                                        ARM_SMMU_FSR_TLBMCF |          \
> > -                                        ARM_SMMU_FSR_TLBLKF)
> > -
> > -#define ARM_SMMU_FSR_FAULT             (ARM_SMMU_FSR_MULTI |           \
> > -                                        ARM_SMMU_FSR_SS |              \
> > -                                        ARM_SMMU_FSR_UUT |             \
> > -                                        ARM_SMMU_FSR_EF |              \
> > -                                        ARM_SMMU_FSR_PF |              \
> > -                                        ARM_SMMU_FSR_TF |              \
> > +#define ARM_SMMU_CB_FSR_MULTI          BIT(31)
> > +#define ARM_SMMU_CB_FSR_SS             BIT(30)
> > +#define ARM_SMMU_CB_FSR_FORMAT         GENMASK(10, 9)
> > +#define ARM_SMMU_CB_FSR_UUT            BIT(8)
> > +#define ARM_SMMU_CB_FSR_ASF            BIT(7)
> > +#define ARM_SMMU_CB_FSR_TLBLKF         BIT(6)
> > +#define ARM_SMMU_CB_FSR_TLBMCF         BIT(5)
> > +#define ARM_SMMU_CB_FSR_EF             BIT(4)
> > +#define ARM_SMMU_CB_FSR_PF             BIT(3)
> > +#define ARM_SMMU_CB_FSR_AFF            BIT(2)
> > +#define ARM_SMMU_CB_FSR_TF             BIT(1)
> > +
> > +void arm_smmu_parse_fsr(char buf[80], u32 fsr);
> > +
> > +#define ARM_SMMU_FSR_IGN               (ARM_SMMU_CB_FSR_AFF |          \
> > +                                        ARM_SMMU_CB_FSR_ASF |          \
> > +                                        ARM_SMMU_CB_FSR_TLBMCF |       \
> > +                                        ARM_SMMU_CB_FSR_TLBLKF)
> > +
> > +#define ARM_SMMU_FSR_FAULT             (ARM_SMMU_CB_FSR_MULTI |        \
> > +                                        ARM_SMMU_CB_FSR_SS |           \
> > +                                        ARM_SMMU_CB_FSR_UUT |          \
> > +                                        ARM_SMMU_CB_FSR_EF |           \
> > +                                        ARM_SMMU_CB_FSR_PF |           \
> > +                                        ARM_SMMU_CB_FSR_TF |           \
> >                                          ARM_SMMU_FSR_IGN)
> >
> >  #define ARM_SMMU_CB_FAR                        0x60
> >
> >  #define ARM_SMMU_CB_FSYNR0             0x68
> > -#define ARM_SMMU_FSYNR0_WNR            BIT(4)
> > +#define ARM_SMMU_CB_FSYNR0_PLVL                GENMASK(1, 0)
> > +#define ARM_SMMU_CB_FSYNR0_WNR         BIT(4)
> > +#define ARM_SMMU_CB_FSYNR0_PNU         BIT(5)
> > +#define ARM_SMMU_CB_FSYNR0_IND         BIT(6)
> > +#define ARM_SMMU_CB_FSYNR0_NSATTR      BIT(8)
> > +#define ARM_SMMU_CB_FSYNR0_PTWF                BIT(10)
> > +#define ARM_SMMU_CB_FSYNR0_AFR         BIT(11)
> > +#define ARM_SMMU_CB_FSYNR0_S1CBNDX     GENMASK(23, 16)
> > +
> > +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr);
>
> Apart from the buffer overflow, everything else looks fine to me.
>
> >
> >  #define ARM_SMMU_CB_FSYNR1             0x6c
> >
> > --
> > 2.45.2
> >
Robin Murphy June 26, 2024, 8:09 p.m. UTC | #3
On 2024-06-26 5:38 pm, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Parse out the bitfields for easier-to-read fault messages.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
> I kept with the dev_err, which matches qcom_smmu_context_fault.  It is
> only adding two extra lines, and it is ratelimited.
> 
> I also converted qcom_smmu_context_fault() to use the helpers to do the
> parsing, rather than more or less duplicating.
> 
>   .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  | 21 +++---
>   drivers/iommu/arm/arm-smmu/arm-smmu.c         | 70 ++++++++++++++++++-
>   drivers/iommu/arm/arm-smmu/arm-smmu.h         | 58 +++++++++------
>   3 files changed, 110 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> index 552199cbd9e2..ee7eab273e1a 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> @@ -429,22 +429,17 @@ irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
>   		phys_addr_t phys_atos = qcom_smmu_verify_fault(smmu_domain, iova, fsr);
>   
>   		if (__ratelimit(&_rs)) {
> +			char buf[80];
> +
>   			dev_err(smmu->dev,
>   				"Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
>   				fsr, iova, fsynr, cbfrsynra, idx);
> -			dev_err(smmu->dev,
> -				"FSR    = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
> -				fsr,
> -				(fsr & 0x02) ? "TF " : "",
> -				(fsr & 0x04) ? "AFF " : "",
> -				(fsr & 0x08) ? "PF " : "",
> -				(fsr & 0x10) ? "EF " : "",
> -				(fsr & 0x20) ? "TLBMCF " : "",
> -				(fsr & 0x40) ? "TLBLKF " : "",
> -				(fsr & 0x80) ? "MHF " : "",
> -				(fsr & 0x40000000) ? "SS " : "",
> -				(fsr & 0x80000000) ? "MULTI " : "",
> -				cbfrsynra);
> +
> +			arm_smmu_parse_fsr(buf, fsr);
> +			dev_err(smmu->dev, "FSR: %s\n", buf);
> +
> +			arm_smmu_parse_fsynr0(buf, fsynr);
> +			dev_err(smmu->dev, "FSYNR0: %s\n", buf);
>   
>   			dev_err(smmu->dev,
>   				"soft iova-to-phys=%pa\n", &phys_soft);
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> index 87c81f75cf84..7f5ca75d5ebe 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> @@ -405,12 +405,67 @@ static const struct iommu_flush_ops arm_smmu_s2_tlb_ops_v1 = {
>   	.tlb_add_page	= arm_smmu_tlb_add_page_s2_v1,
>   };
>   
> +void arm_smmu_parse_fsr(char buf[80], u32 fsr)
> +{
> +	static const struct {
> +		u32 mask;
> +		const char *name;
> +	} fsr_bits[] = {
> +		{ ARM_SMMU_CB_FSR_MULTI,  "MULTI"  },
> +		{ ARM_SMMU_CB_FSR_SS,     "SS"     },
> +		{ ARM_SMMU_CB_FSR_UUT,    "UUT"    },
> +		{ ARM_SMMU_CB_FSR_ASF,    "ASF"    },
> +		{ ARM_SMMU_CB_FSR_TLBLKF, "TLBLKF" },
> +		{ ARM_SMMU_CB_FSR_TLBMCF, "TLBMCF" },
> +		{ ARM_SMMU_CB_FSR_EF,     "EF"     },
> +		{ ARM_SMMU_CB_FSR_PF,     "PF"     },
> +		{ ARM_SMMU_CB_FSR_AFF,    "AFF"    },
> +		{ ARM_SMMU_CB_FSR_TF,     "TF"     },
> +	};
> +	char *p = buf;
> +
> +	p += sprintf(p, "FORMAT=%u",
> +		     (u32)FIELD_GET(ARM_SMMU_CB_FSR_FORMAT, fsr));
> +
> +	for (int i = 0; i < ARRAY_SIZE(fsr_bits); i++)
> +		if (fsr & fsr_bits[i].mask)

I still much prefer the arm64 data_abort_decode() name=value style, or 
indeed even the qcom_smmu_context_fault() full/empty substring style - 
that's similarly easier to understand, doesn't need the awkward 
temporary buffer, and is still entirely capable of producing the same 
output as you're achieving here. The other good idea from there is 
repeating the raw register value in the same line, that way the decode 
is entirely unambiguous at a glance, and trivial to correlate with the 
full fault data from the first line even when interleaved and without 
CONFIG_PRINTK_CALLER.

> +			p += sprintf(p, "|%s", fsr_bits[i].name);

Furthermore, IM|NT|ENTRLY|CNVNCD|THS|IS|SO|EZ|TO|RD

Spaces, man. Spaces are good. If the aim is to be readable, the 
capital-letter-salad involved here needs all the help it can get :)

> +}
> +
> +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr)
> +{
> +	static const struct {
> +		u32 mask;
> +		const char *name;
> +	} fsynr0_bits[] = {
> +		{ ARM_SMMU_CB_FSYNR0_WNR,    "WNR"    },
> +		{ ARM_SMMU_CB_FSYNR0_PNU,    "PNU"    },
> +		{ ARM_SMMU_CB_FSYNR0_IND,    "IND"    },
> +		{ ARM_SMMU_CB_FSYNR0_NSATTR, "NSATTR" },
> +		{ ARM_SMMU_CB_FSYNR0_PTWF,   "PTWF"   },
> +		{ ARM_SMMU_CB_FSYNR0_AFR,    "AFR"    },
> +	};
> +	char *p = buf;
> +
> +	p += sprintf(p, "S1CBNDX=%u",
> +		     (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_S1CBNDX, fsynr));
> +
> +	for (int i = 0; i < ARRAY_SIZE(fsynr0_bits); i++)
> +		if (fsynr & fsynr0_bits[i].mask)
> +			p += sprintf(p, "|%s", fsynr0_bits[i].name);
> +
> +	p += sprintf(p, "|PLVL=%u",
> +		     (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_PLVL, fsynr));
> +}
> +
>   static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>   {
>   	u32 fsr, fsynr, cbfrsynra;
>   	unsigned long iova;
>   	struct arm_smmu_domain *smmu_domain = dev;
>   	struct arm_smmu_device *smmu = smmu_domain->smmu;
> +	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
> +				      DEFAULT_RATELIMIT_BURST);
>   	int idx = smmu_domain->cfg.cbndx;
>   	int ret;
>   
> @@ -423,13 +478,22 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
>   	cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
>   
>   	ret = report_iommu_fault(&smmu_domain->domain, NULL, iova,
> -		fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> +		fsynr & ARM_SMMU_CB_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
> +
> +	if (ret == -ENOSYS && __ratelimit(&rs)) {
> +		char buf[80];
>   
> -	if (ret == -ENOSYS)
> -		dev_err_ratelimited(smmu->dev,
> +		dev_err(smmu->dev,
>   		"Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
>   			    fsr, iova, fsynr, cbfrsynra, idx);
>   
> +		arm_smmu_parse_fsr(buf, fsr);
> +		dev_err(smmu->dev, "FSR: %s\n", buf);
> +
> +		arm_smmu_parse_fsynr0(buf, fsynr);
> +		dev_err(smmu->dev, "FSYNR0: %s\n", buf);
> +	}
> +
>   	arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
>   	return IRQ_HANDLED;
>   }
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> index 4765c6945c34..763ea52fca64 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> @@ -196,34 +196,46 @@ enum arm_smmu_cbar_type {
>   #define ARM_SMMU_CB_PAR_F		BIT(0)
>   
>   #define ARM_SMMU_CB_FSR			0x58
> -#define ARM_SMMU_FSR_MULTI		BIT(31)
> -#define ARM_SMMU_FSR_SS			BIT(30)
> -#define ARM_SMMU_FSR_UUT		BIT(8)
> -#define ARM_SMMU_FSR_ASF		BIT(7)
> -#define ARM_SMMU_FSR_TLBLKF		BIT(6)
> -#define ARM_SMMU_FSR_TLBMCF		BIT(5)
> -#define ARM_SMMU_FSR_EF			BIT(4)
> -#define ARM_SMMU_FSR_PF			BIT(3)
> -#define ARM_SMMU_FSR_AFF		BIT(2)
> -#define ARM_SMMU_FSR_TF			BIT(1)
> -
> -#define ARM_SMMU_FSR_IGN		(ARM_SMMU_FSR_AFF |		\
> -					 ARM_SMMU_FSR_ASF |		\
> -					 ARM_SMMU_FSR_TLBMCF |		\
> -					 ARM_SMMU_FSR_TLBLKF)
> -
> -#define ARM_SMMU_FSR_FAULT		(ARM_SMMU_FSR_MULTI |		\
> -					 ARM_SMMU_FSR_SS |		\
> -					 ARM_SMMU_FSR_UUT |		\
> -					 ARM_SMMU_FSR_EF |		\
> -					 ARM_SMMU_FSR_PF |		\
> -					 ARM_SMMU_FSR_TF |		\
> +#define ARM_SMMU_CB_FSR_MULTI		BIT(31)
> +#define ARM_SMMU_CB_FSR_SS		BIT(30)
> +#define ARM_SMMU_CB_FSR_FORMAT		GENMASK(10, 9)
> +#define ARM_SMMU_CB_FSR_UUT		BIT(8)
> +#define ARM_SMMU_CB_FSR_ASF		BIT(7)
> +#define ARM_SMMU_CB_FSR_TLBLKF		BIT(6)
> +#define ARM_SMMU_CB_FSR_TLBMCF		BIT(5)
> +#define ARM_SMMU_CB_FSR_EF		BIT(4)
> +#define ARM_SMMU_CB_FSR_PF		BIT(3)
> +#define ARM_SMMU_CB_FSR_AFF		BIT(2)
> +#define ARM_SMMU_CB_FSR_TF		BIT(1)
> +
> +void arm_smmu_parse_fsr(char buf[80], u32 fsr);
> +
> +#define ARM_SMMU_FSR_IGN		(ARM_SMMU_CB_FSR_AFF |		\
> +					 ARM_SMMU_CB_FSR_ASF |		\
> +					 ARM_SMMU_CB_FSR_TLBMCF |	\
> +					 ARM_SMMU_CB_FSR_TLBLKF)
> +
> +#define ARM_SMMU_FSR_FAULT		(ARM_SMMU_CB_FSR_MULTI |	\
> +					 ARM_SMMU_CB_FSR_SS |		\
> +					 ARM_SMMU_CB_FSR_UUT |		\
> +					 ARM_SMMU_CB_FSR_EF |		\
> +					 ARM_SMMU_CB_FSR_PF |		\
> +					 ARM_SMMU_CB_FSR_TF |		\
>   					 ARM_SMMU_FSR_IGN)
>   
>   #define ARM_SMMU_CB_FAR			0x60
>   
>   #define ARM_SMMU_CB_FSYNR0		0x68
> -#define ARM_SMMU_FSYNR0_WNR		BIT(4)
> +#define ARM_SMMU_CB_FSYNR0_PLVL		GENMASK(1, 0)
> +#define ARM_SMMU_CB_FSYNR0_WNR		BIT(4)
> +#define ARM_SMMU_CB_FSYNR0_PNU		BIT(5)
> +#define ARM_SMMU_CB_FSYNR0_IND		BIT(6)
> +#define ARM_SMMU_CB_FSYNR0_NSATTR	BIT(8)
> +#define ARM_SMMU_CB_FSYNR0_PTWF		BIT(10)
> +#define ARM_SMMU_CB_FSYNR0_AFR		BIT(11)
> +#define ARM_SMMU_CB_FSYNR0_S1CBNDX	GENMASK(23, 16)

Nit: MSB-to-LSB order like all the other register fields, please.

Thanks,
Robin.

> +
> +void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr);
>   
>   #define ARM_SMMU_CB_FSYNR1		0x6c
>
diff mbox series

Patch

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
index 552199cbd9e2..ee7eab273e1a 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
@@ -429,22 +429,17 @@  irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
 		phys_addr_t phys_atos = qcom_smmu_verify_fault(smmu_domain, iova, fsr);
 
 		if (__ratelimit(&_rs)) {
+			char buf[80];
+
 			dev_err(smmu->dev,
 				"Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
 				fsr, iova, fsynr, cbfrsynra, idx);
-			dev_err(smmu->dev,
-				"FSR    = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
-				fsr,
-				(fsr & 0x02) ? "TF " : "",
-				(fsr & 0x04) ? "AFF " : "",
-				(fsr & 0x08) ? "PF " : "",
-				(fsr & 0x10) ? "EF " : "",
-				(fsr & 0x20) ? "TLBMCF " : "",
-				(fsr & 0x40) ? "TLBLKF " : "",
-				(fsr & 0x80) ? "MHF " : "",
-				(fsr & 0x40000000) ? "SS " : "",
-				(fsr & 0x80000000) ? "MULTI " : "",
-				cbfrsynra);
+
+			arm_smmu_parse_fsr(buf, fsr);
+			dev_err(smmu->dev, "FSR: %s\n", buf);
+
+			arm_smmu_parse_fsynr0(buf, fsynr);
+			dev_err(smmu->dev, "FSYNR0: %s\n", buf);
 
 			dev_err(smmu->dev,
 				"soft iova-to-phys=%pa\n", &phys_soft);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index 87c81f75cf84..7f5ca75d5ebe 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -405,12 +405,67 @@  static const struct iommu_flush_ops arm_smmu_s2_tlb_ops_v1 = {
 	.tlb_add_page	= arm_smmu_tlb_add_page_s2_v1,
 };
 
+void arm_smmu_parse_fsr(char buf[80], u32 fsr)
+{
+	static const struct {
+		u32 mask;
+		const char *name;
+	} fsr_bits[] = {
+		{ ARM_SMMU_CB_FSR_MULTI,  "MULTI"  },
+		{ ARM_SMMU_CB_FSR_SS,     "SS"     },
+		{ ARM_SMMU_CB_FSR_UUT,    "UUT"    },
+		{ ARM_SMMU_CB_FSR_ASF,    "ASF"    },
+		{ ARM_SMMU_CB_FSR_TLBLKF, "TLBLKF" },
+		{ ARM_SMMU_CB_FSR_TLBMCF, "TLBMCF" },
+		{ ARM_SMMU_CB_FSR_EF,     "EF"     },
+		{ ARM_SMMU_CB_FSR_PF,     "PF"     },
+		{ ARM_SMMU_CB_FSR_AFF,    "AFF"    },
+		{ ARM_SMMU_CB_FSR_TF,     "TF"     },
+	};
+	char *p = buf;
+
+	p += sprintf(p, "FORMAT=%u",
+		     (u32)FIELD_GET(ARM_SMMU_CB_FSR_FORMAT, fsr));
+
+	for (int i = 0; i < ARRAY_SIZE(fsr_bits); i++)
+		if (fsr & fsr_bits[i].mask)
+			p += sprintf(p, "|%s", fsr_bits[i].name);
+}
+
+void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr)
+{
+	static const struct {
+		u32 mask;
+		const char *name;
+	} fsynr0_bits[] = {
+		{ ARM_SMMU_CB_FSYNR0_WNR,    "WNR"    },
+		{ ARM_SMMU_CB_FSYNR0_PNU,    "PNU"    },
+		{ ARM_SMMU_CB_FSYNR0_IND,    "IND"    },
+		{ ARM_SMMU_CB_FSYNR0_NSATTR, "NSATTR" },
+		{ ARM_SMMU_CB_FSYNR0_PTWF,   "PTWF"   },
+		{ ARM_SMMU_CB_FSYNR0_AFR,    "AFR"    },
+	};
+	char *p = buf;
+
+	p += sprintf(p, "S1CBNDX=%u",
+		     (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_S1CBNDX, fsynr));
+
+	for (int i = 0; i < ARRAY_SIZE(fsynr0_bits); i++)
+		if (fsynr & fsynr0_bits[i].mask)
+			p += sprintf(p, "|%s", fsynr0_bits[i].name);
+
+	p += sprintf(p, "|PLVL=%u",
+		     (u32)FIELD_GET(ARM_SMMU_CB_FSYNR0_PLVL, fsynr));
+}
+
 static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
 {
 	u32 fsr, fsynr, cbfrsynra;
 	unsigned long iova;
 	struct arm_smmu_domain *smmu_domain = dev;
 	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+				      DEFAULT_RATELIMIT_BURST);
 	int idx = smmu_domain->cfg.cbndx;
 	int ret;
 
@@ -423,13 +478,22 @@  static irqreturn_t arm_smmu_context_fault(int irq, void *dev)
 	cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
 
 	ret = report_iommu_fault(&smmu_domain->domain, NULL, iova,
-		fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
+		fsynr & ARM_SMMU_CB_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
+
+	if (ret == -ENOSYS && __ratelimit(&rs)) {
+		char buf[80];
 
-	if (ret == -ENOSYS)
-		dev_err_ratelimited(smmu->dev,
+		dev_err(smmu->dev,
 		"Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
 			    fsr, iova, fsynr, cbfrsynra, idx);
 
+		arm_smmu_parse_fsr(buf, fsr);
+		dev_err(smmu->dev, "FSR: %s\n", buf);
+
+		arm_smmu_parse_fsynr0(buf, fsynr);
+		dev_err(smmu->dev, "FSYNR0: %s\n", buf);
+	}
+
 	arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
 	return IRQ_HANDLED;
 }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 4765c6945c34..763ea52fca64 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -196,34 +196,46 @@  enum arm_smmu_cbar_type {
 #define ARM_SMMU_CB_PAR_F		BIT(0)
 
 #define ARM_SMMU_CB_FSR			0x58
-#define ARM_SMMU_FSR_MULTI		BIT(31)
-#define ARM_SMMU_FSR_SS			BIT(30)
-#define ARM_SMMU_FSR_UUT		BIT(8)
-#define ARM_SMMU_FSR_ASF		BIT(7)
-#define ARM_SMMU_FSR_TLBLKF		BIT(6)
-#define ARM_SMMU_FSR_TLBMCF		BIT(5)
-#define ARM_SMMU_FSR_EF			BIT(4)
-#define ARM_SMMU_FSR_PF			BIT(3)
-#define ARM_SMMU_FSR_AFF		BIT(2)
-#define ARM_SMMU_FSR_TF			BIT(1)
-
-#define ARM_SMMU_FSR_IGN		(ARM_SMMU_FSR_AFF |		\
-					 ARM_SMMU_FSR_ASF |		\
-					 ARM_SMMU_FSR_TLBMCF |		\
-					 ARM_SMMU_FSR_TLBLKF)
-
-#define ARM_SMMU_FSR_FAULT		(ARM_SMMU_FSR_MULTI |		\
-					 ARM_SMMU_FSR_SS |		\
-					 ARM_SMMU_FSR_UUT |		\
-					 ARM_SMMU_FSR_EF |		\
-					 ARM_SMMU_FSR_PF |		\
-					 ARM_SMMU_FSR_TF |		\
+#define ARM_SMMU_CB_FSR_MULTI		BIT(31)
+#define ARM_SMMU_CB_FSR_SS		BIT(30)
+#define ARM_SMMU_CB_FSR_FORMAT		GENMASK(10, 9)
+#define ARM_SMMU_CB_FSR_UUT		BIT(8)
+#define ARM_SMMU_CB_FSR_ASF		BIT(7)
+#define ARM_SMMU_CB_FSR_TLBLKF		BIT(6)
+#define ARM_SMMU_CB_FSR_TLBMCF		BIT(5)
+#define ARM_SMMU_CB_FSR_EF		BIT(4)
+#define ARM_SMMU_CB_FSR_PF		BIT(3)
+#define ARM_SMMU_CB_FSR_AFF		BIT(2)
+#define ARM_SMMU_CB_FSR_TF		BIT(1)
+
+void arm_smmu_parse_fsr(char buf[80], u32 fsr);
+
+#define ARM_SMMU_FSR_IGN		(ARM_SMMU_CB_FSR_AFF |		\
+					 ARM_SMMU_CB_FSR_ASF |		\
+					 ARM_SMMU_CB_FSR_TLBMCF |	\
+					 ARM_SMMU_CB_FSR_TLBLKF)
+
+#define ARM_SMMU_FSR_FAULT		(ARM_SMMU_CB_FSR_MULTI |	\
+					 ARM_SMMU_CB_FSR_SS |		\
+					 ARM_SMMU_CB_FSR_UUT |		\
+					 ARM_SMMU_CB_FSR_EF |		\
+					 ARM_SMMU_CB_FSR_PF |		\
+					 ARM_SMMU_CB_FSR_TF |		\
 					 ARM_SMMU_FSR_IGN)
 
 #define ARM_SMMU_CB_FAR			0x60
 
 #define ARM_SMMU_CB_FSYNR0		0x68
-#define ARM_SMMU_FSYNR0_WNR		BIT(4)
+#define ARM_SMMU_CB_FSYNR0_PLVL		GENMASK(1, 0)
+#define ARM_SMMU_CB_FSYNR0_WNR		BIT(4)
+#define ARM_SMMU_CB_FSYNR0_PNU		BIT(5)
+#define ARM_SMMU_CB_FSYNR0_IND		BIT(6)
+#define ARM_SMMU_CB_FSYNR0_NSATTR	BIT(8)
+#define ARM_SMMU_CB_FSYNR0_PTWF		BIT(10)
+#define ARM_SMMU_CB_FSYNR0_AFR		BIT(11)
+#define ARM_SMMU_CB_FSYNR0_S1CBNDX	GENMASK(23, 16)
+
+void arm_smmu_parse_fsynr0(char buf[80], u32 fsynr);
 
 #define ARM_SMMU_CB_FSYNR1		0x6c