Message ID | 20240628061929.89273-2-u.kleine-koenig@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | PM / devfreq: sun8i-a33-mbus: Make use of devm_ functions for clks | expand |
On Fri, Jun 28, 2024 at 2:19 PM Uwe Kleine-König <u.kleine-koenig@baylibre.com> wrote: > > Using devm_clk_get_enabled() and devm_clk_rate_exclusive_get() allows to > simplify the error paths in .probe() and the remove callback. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> > --- > drivers/devfreq/sun8i-a33-mbus.c | 38 +++++++++----------------------- > 1 file changed, 10 insertions(+), 28 deletions(-) > > diff --git a/drivers/devfreq/sun8i-a33-mbus.c b/drivers/devfreq/sun8i-a33-mbus.c > index bcf654f4ff96..4c179d7ddf0b 100644 > --- a/drivers/devfreq/sun8i-a33-mbus.c > +++ b/drivers/devfreq/sun8i-a33-mbus.c > @@ -360,7 +360,7 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) > if (IS_ERR(priv->reg_mbus)) > return PTR_ERR(priv->reg_mbus); > > - priv->clk_bus = devm_clk_get(dev, "bus"); > + priv->clk_bus = devm_clk_get_enabled(dev, "bus"); > if (IS_ERR(priv->clk_bus)) > return dev_err_probe(dev, PTR_ERR(priv->clk_bus), > "failed to get bus clock\n"); > @@ -375,24 +375,17 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) > return dev_err_probe(dev, PTR_ERR(priv->clk_mbus), > "failed to get mbus clock\n"); > > - ret = clk_prepare_enable(priv->clk_bus); > + /* Lock the DRAM clock rate to keep priv->nominal_bw in sync. */ > + ret = devm_clk_rate_exclusive_get(dev, priv->clk_dram); > if (ret) > return dev_err_probe(dev, ret, > - "failed to enable bus clock\n"); > - > - /* Lock the DRAM clock rate to keep priv->nominal_bw in sync. */ > - ret = clk_rate_exclusive_get(priv->clk_dram); > - if (ret) { > - err = "failed to lock dram clock rate\n"; > - goto err_disable_bus; > - } > + "failed to lock dram clock rate\n"); > > /* Lock the MBUS clock rate to keep MBUS_TMR_PERIOD in sync. */ > - ret = clk_rate_exclusive_get(priv->clk_mbus); > - if (ret) { > - err = "failed to lock mbus clock rate\n"; > - goto err_unlock_dram; > - } > + ret = devm_clk_rate_exclusive_get(dev, priv->clk_mbus); > + if (ret) > + return dev_err_probe(dev, ret, > + "failed to lock mbus clock rate\n"); > > priv->gov_data.upthreshold = 10; > priv->gov_data.downdifferential = 5; > @@ -405,10 +398,8 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) > priv->profile.max_state = max_state; > > ret = devm_pm_opp_set_clkname(dev, "dram"); > - if (ret) { > - err = "failed to add OPP table\n"; > - goto err_unlock_mbus; > - } > + if (ret) > + return dev_err_probe(dev, ret, "failed to add OPP table\n"); > > base_freq = clk_get_rate(clk_get_parent(priv->clk_dram)); > for (i = 0; i < max_state; ++i) { > @@ -448,12 +439,6 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) > > err_remove_opps: > dev_pm_opp_remove_all_dynamic(dev); > -err_unlock_mbus: > - clk_rate_exclusive_put(priv->clk_mbus); > -err_unlock_dram: > - clk_rate_exclusive_put(priv->clk_dram); > -err_disable_bus: > - clk_disable_unprepare(priv->clk_bus); > > return dev_err_probe(dev, ret, err); > } > @@ -472,9 +457,6 @@ static void sun8i_a33_mbus_remove(struct platform_device *pdev) > dev_warn(dev, "failed to restore DRAM frequency: %d\n", ret); > > dev_pm_opp_remove_all_dynamic(dev); > - clk_rate_exclusive_put(priv->clk_mbus); > - clk_rate_exclusive_put(priv->clk_dram); > - clk_disable_unprepare(priv->clk_bus); > } > > static const struct sun8i_a33_mbus_variant sun50i_a64_mbus = { > > base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb > -- > 2.43.0 >
diff --git a/drivers/devfreq/sun8i-a33-mbus.c b/drivers/devfreq/sun8i-a33-mbus.c index bcf654f4ff96..4c179d7ddf0b 100644 --- a/drivers/devfreq/sun8i-a33-mbus.c +++ b/drivers/devfreq/sun8i-a33-mbus.c @@ -360,7 +360,7 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) if (IS_ERR(priv->reg_mbus)) return PTR_ERR(priv->reg_mbus); - priv->clk_bus = devm_clk_get(dev, "bus"); + priv->clk_bus = devm_clk_get_enabled(dev, "bus"); if (IS_ERR(priv->clk_bus)) return dev_err_probe(dev, PTR_ERR(priv->clk_bus), "failed to get bus clock\n"); @@ -375,24 +375,17 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(priv->clk_mbus), "failed to get mbus clock\n"); - ret = clk_prepare_enable(priv->clk_bus); + /* Lock the DRAM clock rate to keep priv->nominal_bw in sync. */ + ret = devm_clk_rate_exclusive_get(dev, priv->clk_dram); if (ret) return dev_err_probe(dev, ret, - "failed to enable bus clock\n"); - - /* Lock the DRAM clock rate to keep priv->nominal_bw in sync. */ - ret = clk_rate_exclusive_get(priv->clk_dram); - if (ret) { - err = "failed to lock dram clock rate\n"; - goto err_disable_bus; - } + "failed to lock dram clock rate\n"); /* Lock the MBUS clock rate to keep MBUS_TMR_PERIOD in sync. */ - ret = clk_rate_exclusive_get(priv->clk_mbus); - if (ret) { - err = "failed to lock mbus clock rate\n"; - goto err_unlock_dram; - } + ret = devm_clk_rate_exclusive_get(dev, priv->clk_mbus); + if (ret) + return dev_err_probe(dev, ret, + "failed to lock mbus clock rate\n"); priv->gov_data.upthreshold = 10; priv->gov_data.downdifferential = 5; @@ -405,10 +398,8 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) priv->profile.max_state = max_state; ret = devm_pm_opp_set_clkname(dev, "dram"); - if (ret) { - err = "failed to add OPP table\n"; - goto err_unlock_mbus; - } + if (ret) + return dev_err_probe(dev, ret, "failed to add OPP table\n"); base_freq = clk_get_rate(clk_get_parent(priv->clk_dram)); for (i = 0; i < max_state; ++i) { @@ -448,12 +439,6 @@ static int sun8i_a33_mbus_probe(struct platform_device *pdev) err_remove_opps: dev_pm_opp_remove_all_dynamic(dev); -err_unlock_mbus: - clk_rate_exclusive_put(priv->clk_mbus); -err_unlock_dram: - clk_rate_exclusive_put(priv->clk_dram); -err_disable_bus: - clk_disable_unprepare(priv->clk_bus); return dev_err_probe(dev, ret, err); } @@ -472,9 +457,6 @@ static void sun8i_a33_mbus_remove(struct platform_device *pdev) dev_warn(dev, "failed to restore DRAM frequency: %d\n", ret); dev_pm_opp_remove_all_dynamic(dev); - clk_rate_exclusive_put(priv->clk_mbus); - clk_rate_exclusive_put(priv->clk_dram); - clk_disable_unprepare(priv->clk_bus); } static const struct sun8i_a33_mbus_variant sun50i_a64_mbus = {
Using devm_clk_get_enabled() and devm_clk_rate_exclusive_get() allows to simplify the error paths in .probe() and the remove callback. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> --- drivers/devfreq/sun8i-a33-mbus.c | 38 +++++++++----------------------- 1 file changed, 10 insertions(+), 28 deletions(-) base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb