diff mbox series

[v2,3/4] arm64: dts: st: describe power supplies for stm32mp257f-ev1 board

Message ID 20240628085814.1586186-4-p.paillet@foss.st.com (mailing list archive)
State New, archived
Headers show
Series Add SCMI regulators desciption on STM32MP25 | expand

Commit Message

Pascal Paillet June 28, 2024, 8:58 a.m. UTC 
Describe power supplies for stm32mp257f-ev1 board.

Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 43 +++++++++++++++++-----
 1 file changed, 34 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 18c6266532b2..979847e0ea05 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -7,6 +7,7 @@ 
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/st,stm32mp25-regulator.h>
 #include "stm32mp257.dtsi"
 #include "stm32mp25xf.dtsi"
 #include "stm32mp25-pinctrl.dtsi"
@@ -41,14 +42,6 @@  fw@80000000 {
 			no-map;
 		};
 	};
-
-	vdd_sdcard: vdd-sdcard {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_sdcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
 };
 
 &arm_wdt {
@@ -56,6 +49,37 @@  &arm_wdt {
 	status = "okay";
 };
 
+&scmi_regu {
+	scmi_vddio1: regulator@0 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+	scmi_vddcore: regulator@11  {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK2>;
+		regulator-name = "vddcore";
+	};
+	scmi_v1v8: regulator@14  {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK5>;
+		regulator-name = "v1v8";
+	};
+	scmi_v3v3: regulator@16 {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK7>;
+		regulator-name = "v3v3";
+	};
+	scmi_vdd_emmc: regulator@18 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO2>;
+		regulator-name = "vdd_emmc";
+	};
+	scmi_vdd3v3_usb: regulator@20 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO4>;
+		regulator-name = "vdd3v3_usb";
+	};
+	scmi_vdd_sdcard: regulator@23 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO7>;
+		regulator-name = "vdd_sdcard";
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -85,7 +109,8 @@  &sdmmc1 {
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
-	vmmc-supply = <&vdd_sdcard>;
+	vmmc-supply = <&scmi_vdd_sdcard>;
+	vqmmc-supply = <&scmi_vddio1>;
 	status = "okay";
 };