diff mbox series

[01/10] ARM: spitz: fix GPIO assignment for backlight

Message ID 20240628180852.1738922-2-dmitry.torokhov@gmail.com (mailing list archive)
State New
Headers show
Series ARM: pxa: use software nodes/properties for GPIOs | expand

Commit Message

Dmitry Torokhov June 28, 2024, 6:08 p.m. UTC 
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.

Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.

Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3c5f5a3cb480..10ab16dcd827 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -520,10 +520,8 @@  static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@  static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
@@ -964,12 +960,9 @@  static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -977,12 +970,9 @@  static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };