diff mbox series

[v2,1/3] arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes

Message ID 20240628223506.1237523-3-peter.griffin@linaro.org (mailing list archive)
State New
Headers show
Series Add syscon-reboot and syscon-poweroff support for gs101/Pixel 6 | expand

Commit Message

Peter Griffin June 28, 2024, 10:35 p.m. UTC 
Reboot of gs101 SoC can be handled by setting the
bit(SWRESET_SYSTEM[1]) of SYSTEM_CONFIGURATION register(PMU + 0x3a00).

Poweroff of gs101 SoC can be handled by setting bit(DATA[8]) of
PAD_CTRL_PWR_HOLD register (PMU + 0x3e9c).

Tested using "reboot" and "poweroff -p" commands.

Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index eadb8822e6d4..302c5beb224a 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -1394,6 +1394,21 @@  sysreg_apm: syscon@174204e0 {
 		pmu_system_controller: system-controller@17460000 {
 			compatible = "google,gs101-pmu", "syscon";
 			reg = <0x17460000 0x10000>;
+
+			poweroff: syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
+				mask = <0x100>; /* reset value */
+			};
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
 		};
 
 		pinctrl_gpio_alive: pinctrl@174d0000 {