diff mbox series

arm64: dts: ti: k3-am642-sr-som: mux ethernet phy reset signals input

Message ID 20240704-am64-phy-lockup-v1-1-4a38ded44f9d@solid-run.com (mailing list archive)
State New
Headers show
Series arm64: dts: ti: k3-am642-sr-som: mux ethernet phy reset signals input | expand

Commit Message

Josua Mayer July 4, 2024, 3:23 p.m. UTC 
Specifically on AM64 SoM design, the DP83869 phys have a chance to lock
up if reset gpio are toggled. Update the pinmux to input-only, strongly
enforcing that these signals are left floating at all times.

This avoids sporadic phy initialisation errors mostly encountered during
power-on and reset.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)


---
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
change-id: 20240704-am64-phy-lockup-107ea5ffa228

Sincerely,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
index c19d0b8bbf0f..b1f06071df4c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
@@ -320,7 +320,7 @@  AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* EXTINTn.GPIO1_70 */
 	ethernet_phy0_default_pins: ethernet-phy0-default-pins {
 		pinctrl-single,pins = <
 			/* reset */
-			AM64X_IOPAD(0x0154, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
 			/* reference clock */
 			AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
 		>;
@@ -329,7 +329,7 @@  AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
 	ethernet_phy1_default_pins: ethernet-phy1-default-pins {
 		pinctrl-single,pins = <
 			/* reset */
-			AM64X_IOPAD(0x0150, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
+			AM64X_IOPAD(0x0150, PIN_INPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
 			/* led0, external pull-down on SoM */
 			AM64X_IOPAD(0x0128, PIN_INPUT, 7) /* PRG1_PRU1_GPO8.GPIO0_73 */
 			/* led1/rxer */
@@ -340,7 +340,7 @@  AM64X_IOPAD(0x011c, PIN_INPUT, 7) /* PRG1_PRU1_GPO5.GPIO0_70 */
 	ethernet_phy2_default_pins: ethernet-phy2-default-pins {
 		pinctrl-single,pins = <
 			/* reset */
-			AM64X_IOPAD(0x00d4, PIN_OUTPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */
+			AM64X_IOPAD(0x00d4, PIN_INPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */
 			/* led0, external pull-down on SoM */
 			AM64X_IOPAD(0x00d8, PIN_INPUT, 7) /* PRG1_PRU0_GPO8.GPIO0_53 */
 			/* led1/rxer */