@@ -464,7 +464,7 @@ irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
return ret;
}
-static int qcom_tbu_probe(struct platform_device *pdev)
+int qcom_tbu_probe(struct platform_device *pdev)
{
struct of_phandle_args args = { .args_count = 2 };
struct device_node *np = pdev->dev.of_node;
@@ -506,18 +506,3 @@ static int qcom_tbu_probe(struct platform_device *pdev)
return 0;
}
-
-static const struct of_device_id qcom_tbu_of_match[] = {
- { .compatible = "qcom,sc7280-tbu" },
- { .compatible = "qcom,sdm845-tbu" },
- { }
-};
-
-static struct platform_driver qcom_tbu_driver = {
- .driver = {
- .name = "qcom_tbu",
- .of_match_table = qcom_tbu_of_match,
- },
- .probe = qcom_tbu_probe,
-};
-builtin_platform_driver(qcom_tbu_driver);
@@ -8,6 +8,8 @@
#include <linux/delay.h>
#include <linux/of_device.h>
#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include "arm-smmu.h"
#include "arm-smmu-qcom.h"
@@ -562,10 +564,47 @@ static struct acpi_platform_list qcom_acpi_platlist[] = {
};
#endif
+static int qcom_smmu_tbu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (IS_ENABLED(CONFIG_ARM_SMMU_QCOM_DEBUG)) {
+ ret = qcom_tbu_probe(pdev);
+ if (ret)
+ return ret;
+ }
+
+ if (dev->pm_domain) {
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id qcom_smmu_tbu_of_match[] = {
+ { .compatible = "qcom,sc7280-tbu" },
+ { .compatible = "qcom,sdm845-tbu" },
+ { }
+};
+
+static struct platform_driver qcom_smmu_tbu_driver = {
+ .driver = {
+ .name = "qcom_tbu",
+ .of_match_table = qcom_smmu_tbu_of_match,
+ },
+ .probe = qcom_smmu_tbu_probe,
+};
+
struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
{
const struct device_node *np = smmu->dev->of_node;
const struct of_device_id *match;
+ static u8 tbu_registered;
+
+ if (!tbu_registered++)
+ platform_driver_register(&qcom_smmu_tbu_driver);
#ifdef CONFIG_ACPI
if (np == NULL) {
@@ -34,8 +34,10 @@ irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
#ifdef CONFIG_ARM_SMMU_QCOM_DEBUG
void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu);
+int qcom_tbu_probe(struct platform_device *pdev);
#else
static inline void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu) { }
+static inline int qcom_tbu_probe(struct platform_device *pdev) { return -EINVAL; }
#endif
#endif /* _ARM_SMMU_QCOM_H */
Currently the TBU driver will only probe when CONFIG_ARM_SMMU_QCOM_DEBUG is enabled. The driver not probing would prevent the platform to reach sync_state and the system will remain in sub-optimal power consumption mode while waiting for all consumer drivers to probe. To address this, let's register the TBU driver in qcom_smmu_impl_init(), so that it can probe, but still enable its functionality only when the debug option in Kconfig is enabled. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/r/CAA8EJppcXVu72OSo+OiYEiC1HQjP3qCwKMumOsUhcn6Czj0URg@mail.gmail.com Fixes: 414ecb030870 ("iommu/arm-smmu-qcom-debug: Add support for TBUs") Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com> --- .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c | 17 +------- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 39 +++++++++++++++++++ drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 2 + 3 files changed, 42 insertions(+), 16 deletions(-)