diff mbox series

[2/7] ARM: dts: microchip: at91-sama5d2_ptc_ek: Align the eeprom nodename

Message ID 20240704151411.69558-3-andrei.simion@microchip.com (mailing list archive)
State New
Headers show
Series Update the eeprom nodename following device tree specification | expand

Commit Message

Andrei Simion July 4, 2024, 3:14 p.m. UTC 
Aling the eeprom nodename according to device tree specification
and at24.yaml.

Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski July 5, 2024, 6:42 a.m. UTC | #1 
On 04/07/2024 17:14, Andrei Simion wrote:
> Aling the eeprom nodename according to device tree specification
> and at24.yaml.
> 
> Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
> ---
>  arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
> index 200b20515ab1..e4ae60ef5f8a 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
> @@ -231,7 +231,7 @@ i2c1: i2c@fc028000 {
>  				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>  				status = "okay";
>  
> -				at24@50 {
> +				eeprom@50 {

Just squash these all into one commit. This is just naming,
non-functional change so creating 7 patches for this is just huge churn.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 200b20515ab1..e4ae60ef5f8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -231,7 +231,7 @@  i2c1: i2c@fc028000 {
 				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;