| Message ID | 20240705090932.1880496-6-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add Freescale i.MX8qxp Display Controller support | expand |
On 05/07/2024 11:09, Liu Ying wrote: > i.MX8qxp Display Controller(DC) is comprised of three main components that > include a blit engine for 2D graphics accelerations, display controller for > display output processing, as well as a command sequencer. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > .../bindings/display/imx/fsl,imx8qxp-dc.yaml | 243 ++++++++++++++++++ > 1 file changed, 243 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml > new file mode 100644 > index 000000000000..a2ad280d2839 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml > @@ -0,0 +1,243 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qxp Display Controller > + > +description: | > + The Freescale i.MX8qxp Display Controller(DC) is comprised of three main > + components that include a blit engine for 2D graphics accelerations, display > + controller for display output processing, as well as a command sequencer. > + > + Display buffers Source buffers > + (AXI read master) (AXI read master) > + | .......... | | | | > + +---------------------------+------------+------------------+-+-+------+ > + | Display Controller (DC) | .......... | | | | | > + | | | | | | | > + | @@@@@@@@@@@ +----------+------------+------------+ | | | | > + A | | Command | | V V | | | | | > + X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V | > + I | | (AXI CLK) | | | | | @@@@@@@@@@ | > + | @@@@@@@@@@@ | | Pixel Engine | | | | | > + | | | | (AXI CLK) | | | | | > + | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | | > + A | *********** | | | | | | | Blit | | > + H <-+->| Configure | | V V V V | | Engine | | > + B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| | > + | *********** | | Display | | Display | | | | | > + | | | Engine | | Engine | | | | | > + | | | (Disp CLK)| | (Disp CLK)| | | | | > + | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ | > + I | | Common | | | | | | | > + R <-+--| Control | | | Display | | | | > + Q | | (AXI CLK) | | | Controller | | | | > + | @@@@@@@@@@@ +------------------------------------+ | | > + | | | ^ | | > + +--------------------------+----------------+-------+---------+--------+ > + ^ | | | | > + | V V | V > + Clocks & Resets Display Display Panic Destination > + Output0 Output1 Control buffer > + (AXI write master) > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +properties: > + compatible: > + const: fsl,imx8qxp-dc > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 2 > + > + reset-names: > + items: > + - const: axi > + - const: cfg > + > + power-domains: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + ranges: true > + > +patternProperties: > + "^axi-performance-counter@[0-9a-f]+$": Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Is this a PMU? > + type: object > + additionalProperties: true > + > + properties: > + compatible: > + const: fsl,imx8qxp-dc-axi-performance-counter > + > + pixel-engine@56180800 { > + compatible = "fsl,imx8qxp-dc-pixel-engine"; > + reg = <0x56180800 0xac00>; > + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + }; > + > + display-engine@5618b400 { > + compatible = "fsl,imx8qxp-dc-display-engine"; > + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>; > + reg-names = "top", "cfg"; > + interrupt-parent = <&dc0_intc>; Where is this node? I think this proves that interrupt controller is part of the display controller. Best regards, Krzysztof
On 07/07/2024, Krzysztof Kozlowski wrote: > On 05/07/2024 11:09, Liu Ying wrote: >> i.MX8qxp Display Controller(DC) is comprised of three main components that >> include a blit engine for 2D graphics accelerations, display controller for >> display output processing, as well as a command sequencer. >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> >> --- >> .../bindings/display/imx/fsl,imx8qxp-dc.yaml | 243 ++++++++++++++++++ >> 1 file changed, 243 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml >> >> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml >> new file mode 100644 >> index 000000000000..a2ad280d2839 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml >> @@ -0,0 +1,243 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Freescale i.MX8qxp Display Controller >> + >> +description: | >> + The Freescale i.MX8qxp Display Controller(DC) is comprised of three main >> + components that include a blit engine for 2D graphics accelerations, display >> + controller for display output processing, as well as a command sequencer. >> + >> + Display buffers Source buffers >> + (AXI read master) (AXI read master) >> + | .......... | | | | >> + +---------------------------+------------+------------------+-+-+------+ >> + | Display Controller (DC) | .......... | | | | | >> + | | | | | | | >> + | @@@@@@@@@@@ +----------+------------+------------+ | | | | >> + A | | Command | | V V | | | | | >> + X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V | >> + I | | (AXI CLK) | | | | | @@@@@@@@@@ | >> + | @@@@@@@@@@@ | | Pixel Engine | | | | | >> + | | | | (AXI CLK) | | | | | >> + | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | | >> + A | *********** | | | | | | | Blit | | >> + H <-+->| Configure | | V V V V | | Engine | | >> + B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| | >> + | *********** | | Display | | Display | | | | | >> + | | | Engine | | Engine | | | | | >> + | | | (Disp CLK)| | (Disp CLK)| | | | | >> + | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ | >> + I | | Common | | | | | | | >> + R <-+--| Control | | | Display | | | | >> + Q | | (AXI CLK) | | | Controller | | | | >> + | @@@@@@@@@@@ +------------------------------------+ | | >> + | | | ^ | | >> + +--------------------------+----------------+-------+---------+--------+ >> + ^ | | | | >> + | V V | V >> + Clocks & Resets Display Display Panic Destination >> + Output0 Output1 Control buffer >> + (AXI write master) >> + >> +maintainers: >> + - Liu Ying <victor.liu@nxp.com> >> + >> +properties: >> + compatible: >> + const: fsl,imx8qxp-dc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + resets: >> + maxItems: 2 >> + >> + reset-names: >> + items: >> + - const: axi >> + - const: cfg >> + >> + power-domains: >> + maxItems: 1 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 1 >> + >> + ranges: true >> + >> +patternProperties: >> + "^axi-performance-counter@[0-9a-f]+$": > > Node names should be generic. See also an explanation and list of Ok. > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > > Is this a PMU? Will use "^pmu@[0-9a-f]+$". Thanks. > >> + type: object >> + additionalProperties: true >> + >> + properties: >> + compatible: >> + const: fsl,imx8qxp-dc-axi-performance-counter >> + > > >> + pixel-engine@56180800 { >> + compatible = "fsl,imx8qxp-dc-pixel-engine"; >> + reg = <0x56180800 0xac00>; >> + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + }; >> + >> + display-engine@5618b400 { >> + compatible = "fsl,imx8qxp-dc-display-engine"; >> + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>; >> + reg-names = "top", "cfg"; >> + interrupt-parent = <&dc0_intc>; > > Where is this node? It's the interrupt controller documented in patch 4/10 in this series. It's a child node in the main display controller node. > > I think this proves that interrupt controller is part of the display > controller. Yes. But, per Maxime, the interrupt controller is a separate device. > > Best regards, > Krzysztof > >
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml new file mode 100644 index 000000000000..a2ad280d2839 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller + +description: | + The Freescale i.MX8qxp Display Controller(DC) is comprised of three main + components that include a blit engine for 2D graphics accelerations, display + controller for display output processing, as well as a command sequencer. + + Display buffers Source buffers + (AXI read master) (AXI read master) + | .......... | | | | + +---------------------------+------------+------------------+-+-+------+ + | Display Controller (DC) | .......... | | | | | + | | | | | | | + | @@@@@@@@@@@ +----------+------------+------------+ | | | | + A | | Command | | V V | | | | | + X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V | + I | | (AXI CLK) | | | | | @@@@@@@@@@ | + | @@@@@@@@@@@ | | Pixel Engine | | | | | + | | | | (AXI CLK) | | | | | + | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | | + A | *********** | | | | | | | Blit | | + H <-+->| Configure | | V V V V | | Engine | | + B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| | + | *********** | | Display | | Display | | | | | + | | | Engine | | Engine | | | | | + | | | (Disp CLK)| | (Disp CLK)| | | | | + | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ | + I | | Common | | | | | | | + R <-+--| Control | | | Display | | | | + Q | | (AXI CLK) | | | Controller | | | | + | @@@@@@@@@@@ +------------------------------------+ | | + | | | ^ | | + +--------------------------+----------------+-------+---------+--------+ + ^ | | | | + | V V | V + Clocks & Resets Display Display Panic Destination + Output0 Output1 Control buffer + (AXI write master) + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: axi + - const: cfg + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^axi-performance-counter@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-axi-performance-counter + + "^command-sequencer@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-command-sequencer + + "^display-engine@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-display-engine + + "^interrupt-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-intc + + "^pixel-engine@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-pixel-engine + +required: + - compatible + - reg + - clocks + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + display-controller@56180000 { + compatible = "fsl,imx8qxp-dc"; + reg = <0x56180000 0x40000>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_4>; + power-domains = <&pd IMX_SC_R_DC_0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-controller@56180040 { + compatible = "fsl,imx8qxp-dc-intc"; + reg = <0x56180040 0x60>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-controller; + interrupt-parent = <&dc0_irqsteer>; + #interrupt-cells = <1>; + interrupts = <448>, <449>, <450>, <64>, + <65>, <66>, <67>, <68>, + <69>, <70>, <193>, <194>, + <195>, <196>, <197>, <72>, + <73>, <74>, <75>, <76>, + <77>, <78>, <79>, <80>, + <81>, <199>, <200>, <201>, + <202>, <203>, <204>, <205>, + <206>, <207>, <208>, <5>, + <0>, <1>, <2>, <3>, + <4>, <82>, <83>, <84>, + <85>, <209>, <210>, <211>, + <212>; + interrupt-names = "store9_shdload", + "store9_framecomplete", + "store9_seqcomplete", + "extdst0_shdload", + "extdst0_framecomplete", + "extdst0_seqcomplete", + "extdst4_shdload", + "extdst4_framecomplete", + "extdst4_seqcomplete", + "extdst1_shdload", + "extdst1_framecomplete", + "extdst1_seqcomplete", + "extdst5_shdload", + "extdst5_framecomplete", + "extdst5_seqcomplete", + "disengcfg_shdload0", + "disengcfg_framecomplete0", + "disengcfg_seqcomplete0", + "framegen0_int0", + "framegen0_int1", + "framegen0_int2", + "framegen0_int3", + "sig0_shdload", + "sig0_valid", + "sig0_error", + "disengcfg_shdload1", + "disengcfg_framecomplete1", + "disengcfg_seqcomplete1", + "framegen1_int0", + "framegen1_int1", + "framegen1_int2", + "framegen1_int3", + "sig1_shdload", + "sig1_valid", + "sig1_error", + "reserved", + "cmdseq_error", + "comctrl_sw0", + "comctrl_sw1", + "comctrl_sw2", + "comctrl_sw3", + "framegen0_primsync_on", + "framegen0_primsync_off", + "framegen0_secsync_on", + "framegen0_secsync_off", + "framegen1_primsync_on", + "framegen1_primsync_off", + "framegen1_secsync_on", + "framegen1_secsync_off"; + }; + + pixel-engine@56180800 { + compatible = "fsl,imx8qxp-dc-pixel-engine"; + reg = <0x56180800 0xac00>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + display-engine@5618b400 { + compatible = "fsl,imx8qxp-dc-display-engine"; + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>; + reg-names = "top", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <15>, <16>, <17>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + power-domains = <&pd IMX_SC_R_DC_0_PLL_0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + fsl,dc-de-id = <0>; + + port { + dc0_disp0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>; + }; + }; + }; + };
i.MX8qxp Display Controller(DC) is comprised of three main components that include a blit engine for 2D graphics accelerations, display controller for display output processing, as well as a command sequencer. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- .../bindings/display/imx/fsl,imx8qxp-dc.yaml | 243 ++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml