| Message ID | 20240707-raspi-config-v1-2-3e122f2122e9@gmx.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: Refresh Raspberry Pi defconfig and enable SMP support | expand |
Hi Jonathan, Am 07.07.24 um 23:48 schrieb Jonathan Neuschäfer: > Since there is only one Raspberry Pi related defconfig in the mainline > kernel, it's useful to have to work well on all 32-bit Raspberry Pis. this wasn't intention of bcm2835_defconfig. It's more focused on BCM2835 SOC and kernel-ci (both non-SMP). If you want to use the BCM2836 & BCM2837 (incl. SMP), please use multi_v7_defconfig instead. Applying this change would decrease the test coverage. > To that end, this patch enables CONFIG_SMP and CONFIG_SMP_ON_UP, which > allows the kernel to run well on multi- and single-CPU systems. > > PM and suspend support is necessary in order to keep KEXEC enabled. In this case the subject contains only half of the truth. Regards > - Raspberry Pi 2 Model B V1.1 (BCM2836, SMP) > - Raspberry Pi Model B (BCM2835, UP) > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> > --- > arch/arm/configs/bcm2835_defconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig > index da49dcfd359050..d505058715b66f 100644 > --- a/arch/arm/configs/bcm2835_defconfig > +++ b/arch/arm/configs/bcm2835_defconfig > @@ -24,6 +24,7 @@ CONFIG_KEXEC=y > CONFIG_ARCH_MULTI_V6=y > CONFIG_ARCH_BCM=y > CONFIG_ARCH_BCM2835=y > +CONFIG_SMP=y > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y > @@ -33,8 +34,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y > CONFIG_CPUFREQ_DT=y > CONFIG_ARM_RASPBERRYPI_CPUFREQ=y > CONFIG_VFP=y > -# CONFIG_SUSPEND is not set > -CONFIG_PM=y > CONFIG_JUMP_LABEL=y > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > @@ -175,6 +174,7 @@ CONFIG_DEBUG_FS=y > CONFIG_KGDB=y > CONFIG_KGDB_KDB=y > CONFIG_DEBUG_MEMORY_INIT=y > +# CONFIG_RCU_TRACE is not set > CONFIG_FUNCTION_PROFILER=y > CONFIG_STACK_TRACER=y > CONFIG_SCHED_TRACER=y > > -- > 2.43.0 > >
On Mon, Jul 08, 2024 at 05:54:25PM +0200, Stefan Wahren wrote: > Hi Jonathan, > > Am 07.07.24 um 23:48 schrieb Jonathan Neuschäfer: > > Since there is only one Raspberry Pi related defconfig in the mainline > > kernel, it's useful to have to work well on all 32-bit Raspberry Pis. > this wasn't intention of bcm2835_defconfig. It's more focused on BCM2835 > SOC and kernel-ci (both non-SMP). If you want to use the BCM2836 & > BCM2837 (incl. SMP), please use multi_v7_defconfig instead. Applying > this change would decrease the test coverage. Ah, fair enough. Jonathan
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index da49dcfd359050..d505058715b66f 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -24,6 +24,7 @@ CONFIG_KEXEC=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y +CONFIG_SMP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y @@ -33,8 +34,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set -CONFIG_PM=y CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -175,6 +174,7 @@ CONFIG_DEBUG_FS=y CONFIG_KGDB=y CONFIG_KGDB_KDB=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_TRACE is not set CONFIG_FUNCTION_PROFILER=y CONFIG_STACK_TRACER=y CONFIG_SCHED_TRACER=y
Since there is only one Raspberry Pi related defconfig in the mainline kernel, it's useful to have to work well on all 32-bit Raspberry Pis. To that end, this patch enables CONFIG_SMP and CONFIG_SMP_ON_UP, which allows the kernel to run well on multi- and single-CPU systems. PM and suspend support is necessary in order to keep KEXEC enabled. Tested on: - Raspberry Pi 2 Model B V1.1 (BCM2836, SMP) - Raspberry Pi Model B (BCM2835, UP) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> --- arch/arm/configs/bcm2835_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.43.0