Message ID | 20240709063039.2909536-10-maxime.chevallier@bootlin.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Introduce PHY listing and link_topology tracking | expand |
Le 09/07/2024 à 08:30, Maxime Chevallier a écrit : > PLCA is a PHY-specific command. Instead of targeting the command > towards dev->phydev, use the request to pick the targeted PHY. > > Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> > --- > net/ethtool/plca.c | 30 ++++++++++++++++++++---------- > 1 file changed, 20 insertions(+), 10 deletions(-) > > diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c > index b1e2e3b5027f..d95d92f173a6 100644 > --- a/net/ethtool/plca.c > +++ b/net/ethtool/plca.c > @@ -25,7 +25,7 @@ struct plca_reply_data { > > const struct nla_policy ethnl_plca_get_cfg_policy[] = { > [ETHTOOL_A_PLCA_HEADER] = > - NLA_POLICY_NESTED(ethnl_header_policy), > + NLA_POLICY_NESTED(ethnl_header_policy_phy), > }; > > static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, > @@ -58,10 +58,14 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, > struct plca_reply_data *data = PLCA_REPDATA(reply_base); > struct net_device *dev = reply_base->dev; > const struct ethtool_phy_ops *ops; > + struct nlattr **tb = info->attrs; > + struct phy_device *phydev; > int ret; > > + phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], > + info->extack); > // check that the PHY device is available and connected > - if (!dev->phydev) { > + if (IS_ERR_OR_NULL(phydev)) { > ret = -EOPNOTSUPP; > goto out; > } > @@ -80,7 +84,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, > memset(&data->plca_cfg, 0xff, > sizeof_field(struct plca_reply_data, plca_cfg)); > > - ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg); > + ret = ops->get_plca_cfg(phydev, &data->plca_cfg); > ethnl_ops_complete(dev); > > out: > @@ -129,7 +133,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb, > > const struct nla_policy ethnl_plca_set_cfg_policy[] = { > [ETHTOOL_A_PLCA_HEADER] = > - NLA_POLICY_NESTED(ethnl_header_policy), > + NLA_POLICY_NESTED(ethnl_header_policy_phy), > [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), > [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), > [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), > @@ -141,15 +145,17 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = { > static int > ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) > { > - struct net_device *dev = req_info->dev; > const struct ethtool_phy_ops *ops; > struct nlattr **tb = info->attrs; > struct phy_plca_cfg plca_cfg; > + struct phy_device *phydev; > bool mod = false; > int ret; > > + phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PLCA_HEADER], > + info->extack); > // check that the PHY device is available and connected > - if (!dev->phydev) > + if (IS_ERR_OR_NULL(phydev)) > return -EOPNOTSUPP; > > ops = ethtool_phy_ops; > @@ -168,7 +174,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) > if (!mod) > return 0; > > - ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack); > + ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); > return ret < 0 ? ret : 1; > } > > @@ -191,7 +197,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { > > const struct nla_policy ethnl_plca_get_status_policy[] = { > [ETHTOOL_A_PLCA_HEADER] = > - NLA_POLICY_NESTED(ethnl_header_policy), > + NLA_POLICY_NESTED(ethnl_header_policy_phy), > }; > > static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, > @@ -201,10 +207,14 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, > struct plca_reply_data *data = PLCA_REPDATA(reply_base); > struct net_device *dev = reply_base->dev; > const struct ethtool_phy_ops *ops; > + struct nlattr **tb = info->attrs; > + struct phy_device *phydev; > int ret; > > + phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], > + info->extack); > // check that the PHY device is available and connected > - if (!dev->phydev) { > + if (IS_ERR_OR_NULL(phydev)) { > ret = -EOPNOTSUPP; > goto out; > } > @@ -223,7 +233,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, > memset(&data->plca_st, 0xff, > sizeof_field(struct plca_reply_data, plca_st)); > > - ret = ops->get_plca_status(dev->phydev, &data->plca_st); > + ret = ops->get_plca_status(phydev, &data->plca_st); > ethnl_ops_complete(dev); > out: > return ret;
diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c index b1e2e3b5027f..d95d92f173a6 100644 --- a/net/ethtool/plca.c +++ b/net/ethtool/plca.c @@ -25,7 +25,7 @@ struct plca_reply_data { const struct nla_policy ethnl_plca_get_cfg_policy[] = { [ETHTOOL_A_PLCA_HEADER] = - NLA_POLICY_NESTED(ethnl_header_policy), + NLA_POLICY_NESTED(ethnl_header_policy_phy), }; static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, @@ -58,10 +58,14 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, struct plca_reply_data *data = PLCA_REPDATA(reply_base); struct net_device *dev = reply_base->dev; const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; int ret; + phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], + info->extack); // check that the PHY device is available and connected - if (!dev->phydev) { + if (IS_ERR_OR_NULL(phydev)) { ret = -EOPNOTSUPP; goto out; } @@ -80,7 +84,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_cfg, 0xff, sizeof_field(struct plca_reply_data, plca_cfg)); - ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg); + ret = ops->get_plca_cfg(phydev, &data->plca_cfg); ethnl_ops_complete(dev); out: @@ -129,7 +133,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb, const struct nla_policy ethnl_plca_set_cfg_policy[] = { [ETHTOOL_A_PLCA_HEADER] = - NLA_POLICY_NESTED(ethnl_header_policy), + NLA_POLICY_NESTED(ethnl_header_policy_phy), [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), @@ -141,15 +145,17 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = { static int ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) { - struct net_device *dev = req_info->dev; const struct ethtool_phy_ops *ops; struct nlattr **tb = info->attrs; struct phy_plca_cfg plca_cfg; + struct phy_device *phydev; bool mod = false; int ret; + phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PLCA_HEADER], + info->extack); // check that the PHY device is available and connected - if (!dev->phydev) + if (IS_ERR_OR_NULL(phydev)) return -EOPNOTSUPP; ops = ethtool_phy_ops; @@ -168,7 +174,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) if (!mod) return 0; - ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack); + ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); return ret < 0 ? ret : 1; } @@ -191,7 +197,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { const struct nla_policy ethnl_plca_get_status_policy[] = { [ETHTOOL_A_PLCA_HEADER] = - NLA_POLICY_NESTED(ethnl_header_policy), + NLA_POLICY_NESTED(ethnl_header_policy_phy), }; static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, @@ -201,10 +207,14 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, struct plca_reply_data *data = PLCA_REPDATA(reply_base); struct net_device *dev = reply_base->dev; const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; int ret; + phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PLCA_HEADER], + info->extack); // check that the PHY device is available and connected - if (!dev->phydev) { + if (IS_ERR_OR_NULL(phydev)) { ret = -EOPNOTSUPP; goto out; } @@ -223,7 +233,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, memset(&data->plca_st, 0xff, sizeof_field(struct plca_reply_data, plca_st)); - ret = ops->get_plca_status(dev->phydev, &data->plca_st); + ret = ops->get_plca_status(phydev, &data->plca_st); ethnl_ops_complete(dev); out: return ret;
PLCA is a PHY-specific command. Instead of targeting the command towards dev->phydev, use the request to pick the targeted PHY. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- net/ethtool/plca.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-)