| Message ID | 20240714-thermal-v3-2-88f2489ef7d5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add thermal management support for STi platform | expand |
On 14/07/2024 13:42, Raphael Gallais-Pou wrote: > Switch to thermal_of_zone to handle thermal-zones. Replace > thermal_zone_device_register() by devm_thermal_of_zone_register() and > remove ops st_thermal_get_trip_type, st_thermal_get_trip_temp. > > Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> > --- > Changes in v3: > - Fix unmet dependency when building with ARM64 compiler > https://lore.kernel.org/lkml/202406270605.qodaWd4n-lkp@intel.com/ > - Remove no more used polling_delay variable detected by kernel robot > https://lore.kernel.org/lkml/202406270530.kN5wIswi-lkp@intel.com/ > Changes in v2: > - Remove unused struct thermal_trip trip > --- > drivers/thermal/st/Kconfig | 2 ++ > drivers/thermal/st/st_thermal.c | 28 ++++++++++------------------ > 2 files changed, 12 insertions(+), 18 deletions(-) > > diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig > index ecbdf4ef00f4..95a634709a99 100644 > --- a/drivers/thermal/st/Kconfig > +++ b/drivers/thermal/st/Kconfig > @@ -5,12 +5,14 @@ > > config ST_THERMAL > tristate "Thermal sensors on STMicroelectronics STi series of SoCs" > + depends on THERMAL_OF > help > Support for thermal sensors on STMicroelectronics STi series of SoCs. > > config ST_THERMAL_MEMMAP > select ST_THERMAL > tristate "STi series memory mapped access based thermal sensors" > + depends on THERMAL_OF Given the changes below it is possible to move this dependency in the upper Kconfig AFAICS: diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index ed16897584b4..b6b916e7e294 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -429,7 +429,7 @@ source "drivers/thermal/samsung/Kconfig" endmenu menu "STMicroelectronics thermal drivers" -depends on (ARCH_STI || ARCH_STM32) && OF +depends on (ARCH_STI || ARCH_STM32) && THERMAL_OF source "drivers/thermal/st/Kconfig" endmenu THERMAL_OF depends on OF > config STM32_THERMAL > tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs" > diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c > index 5f33543a3a54..23597819ce84 100644 > --- a/drivers/thermal/st/st_thermal.c > +++ b/drivers/thermal/st/st_thermal.c > @@ -12,6 +12,7 @@ > #include <linux/of_device.h> > > #include "st_thermal.h" > +#include "../thermal_hwmon.h" > > /* The Thermal Framework expects millidegrees */ > #define mcelsius(temp) ((temp) * 1000) > @@ -135,8 +136,6 @@ static struct thermal_zone_device_ops st_tz_ops = { > .get_temp = st_thermal_get_temp, > }; > > -static struct thermal_trip trip; > - > int st_thermal_register(struct platform_device *pdev, > const struct of_device_id *st_thermal_of_match) > { > @@ -145,7 +144,6 @@ int st_thermal_register(struct platform_device *pdev, > struct device_node *np = dev->of_node; > const struct of_device_id *match; > > - int polling_delay; > int ret; > > if (!np) { > @@ -197,29 +195,22 @@ int st_thermal_register(struct platform_device *pdev, > if (ret) > goto sensor_off; > > - polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; > - > - trip.temperature = sensor->cdata->crit_temp; > - trip.type = THERMAL_TRIP_CRITICAL; > - > sensor->thermal_dev = > - thermal_zone_device_register_with_trips(dev_name(dev), &trip, 1, sensor, > - &st_tz_ops, NULL, 0, polling_delay); > + devm_thermal_of_zone_register(dev, 0, sensor, &st_tz_ops); > if (IS_ERR(sensor->thermal_dev)) { > - dev_err(dev, "failed to register thermal zone device\n"); > + dev_err(dev, "failed to register thermal of zone\n"); > ret = PTR_ERR(sensor->thermal_dev); > goto sensor_off; > } > - ret = thermal_zone_device_enable(sensor->thermal_dev); > - if (ret) > - goto tzd_unregister; > > platform_set_drvdata(pdev, sensor); > > - return 0; > + /* > + * devm_thermal_of_zone_register() doesn't enable hwmon by default > + * Enable it here > + */ > + return devm_thermal_add_hwmon_sysfs(dev, sensor->thermal_dev); Other drivers ignore the return code or just print a message in case it is not zero. Otherwise, that makes the thermal driver to fail because of hwmon. > -tzd_unregister: > - thermal_zone_device_unregister(sensor->thermal_dev); > sensor_off: > st_thermal_sensor_off(sensor); > > @@ -232,7 +223,8 @@ void st_thermal_unregister(struct platform_device *pdev) > struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); > > st_thermal_sensor_off(sensor); > - thermal_zone_device_unregister(sensor->thermal_dev); > + thermal_remove_hwmon_sysfs(sensor->thermal_dev); > + devm_thermal_of_zone_unregister(sensor->dev, sensor->thermal_dev); > } > EXPORT_SYMBOL_GPL(st_thermal_unregister); > >
Le 16/07/2024 à 15:07, Daniel Lezcano a écrit : > On 14/07/2024 13:42, Raphael Gallais-Pou wrote: >> Switch to thermal_of_zone to handle thermal-zones. Replace >> thermal_zone_device_register() by devm_thermal_of_zone_register() and >> remove ops st_thermal_get_trip_type, st_thermal_get_trip_temp. >> >> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> >> --- >> Changes in v3: >> - Fix unmet dependency when building with ARM64 compiler >> https://lore.kernel.org/lkml/202406270605.qodaWd4n-lkp@intel.com/ >> - Remove no more used polling_delay variable detected by kernel robot >> https://lore.kernel.org/lkml/202406270530.kN5wIswi-lkp@intel.com/ >> Changes in v2: >> - Remove unused struct thermal_trip trip >> --- >> drivers/thermal/st/Kconfig | 2 ++ >> drivers/thermal/st/st_thermal.c | 28 ++++++++++------------------ >> 2 files changed, 12 insertions(+), 18 deletions(-) >> >> diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig >> index ecbdf4ef00f4..95a634709a99 100644 >> --- a/drivers/thermal/st/Kconfig >> +++ b/drivers/thermal/st/Kconfig >> @@ -5,12 +5,14 @@ >> config ST_THERMAL >> tristate "Thermal sensors on STMicroelectronics STi series of SoCs" >> + depends on THERMAL_OF >> help >> Support for thermal sensors on STMicroelectronics STi series >> of SoCs. >> config ST_THERMAL_MEMMAP >> select ST_THERMAL >> tristate "STi series memory mapped access based thermal sensors" >> + depends on THERMAL_OF > > Given the changes below it is possible to move this dependency in the > upper Kconfig AFAICS: > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index ed16897584b4..b6b916e7e294 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -429,7 +429,7 @@ source "drivers/thermal/samsung/Kconfig" > endmenu > > menu "STMicroelectronics thermal drivers" > -depends on (ARCH_STI || ARCH_STM32) && OF > +depends on (ARCH_STI || ARCH_STM32) && THERMAL_OF > source "drivers/thermal/st/Kconfig" > endmenu > > THERMAL_OF depends on OF Hi Daniel, Thanks for your review. Indeed, it makes more sense. I'll change this and remove the "depends on THERMAL_OF" on st/ level. > >> config STM32_THERMAL >> tristate "Thermal framework support on STMicroelectronics STM32 >> series of SoCs" >> diff --git a/drivers/thermal/st/st_thermal.c >> b/drivers/thermal/st/st_thermal.c >> index 5f33543a3a54..23597819ce84 100644 >> --- a/drivers/thermal/st/st_thermal.c >> +++ b/drivers/thermal/st/st_thermal.c >> @@ -12,6 +12,7 @@ >> #include <linux/of_device.h> >> #include "st_thermal.h" >> +#include "../thermal_hwmon.h" >> /* The Thermal Framework expects millidegrees */ >> #define mcelsius(temp) ((temp) * 1000) >> @@ -135,8 +136,6 @@ static struct thermal_zone_device_ops st_tz_ops = { >> .get_temp = st_thermal_get_temp, >> }; >> -static struct thermal_trip trip; >> - >> int st_thermal_register(struct platform_device *pdev, >> const struct of_device_id *st_thermal_of_match) >> { >> @@ -145,7 +144,6 @@ int st_thermal_register(struct platform_device *pdev, >> struct device_node *np = dev->of_node; >> const struct of_device_id *match; >> - int polling_delay; >> int ret; >> if (!np) { >> @@ -197,29 +195,22 @@ int st_thermal_register(struct platform_device >> *pdev, >> if (ret) >> goto sensor_off; >> - polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; >> - >> - trip.temperature = sensor->cdata->crit_temp; >> - trip.type = THERMAL_TRIP_CRITICAL; >> - >> sensor->thermal_dev = >> - thermal_zone_device_register_with_trips(dev_name(dev), &trip, >> 1, sensor, >> - &st_tz_ops, NULL, 0, polling_delay); >> + devm_thermal_of_zone_register(dev, 0, sensor, &st_tz_ops); >> if (IS_ERR(sensor->thermal_dev)) { >> - dev_err(dev, "failed to register thermal zone device\n"); >> + dev_err(dev, "failed to register thermal of zone\n"); >> ret = PTR_ERR(sensor->thermal_dev); >> goto sensor_off; >> } >> - ret = thermal_zone_device_enable(sensor->thermal_dev); >> - if (ret) >> - goto tzd_unregister; >> platform_set_drvdata(pdev, sensor); >> - return 0; >> + /* >> + * devm_thermal_of_zone_register() doesn't enable hwmon by default >> + * Enable it here >> + */ >> + return devm_thermal_add_hwmon_sysfs(dev, sensor->thermal_dev); > > Other drivers ignore the return code or just print a message in case it > is not zero. Otherwise, that makes the thermal driver to fail because of > hwmon. Indeed. I figured that since an error code is yielded only by hwmon when it fails, it seems logical to make the thermal driver fail as well since it depends on hwmon. Maybe I understood something wrong. Does tying thermal to hwmon is a bad practice ? Regards, Raphaël > >> -tzd_unregister: >> - thermal_zone_device_unregister(sensor->thermal_dev); >> sensor_off: >> st_thermal_sensor_off(sensor); >> @@ -232,7 +223,8 @@ void st_thermal_unregister(struct platform_device >> *pdev) >> struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); >> st_thermal_sensor_off(sensor); >> - thermal_zone_device_unregister(sensor->thermal_dev); >> + thermal_remove_hwmon_sysfs(sensor->thermal_dev); >> + devm_thermal_of_zone_unregister(sensor->dev, sensor->thermal_dev); >> } >> EXPORT_SYMBOL_GPL(st_thermal_unregister); >> >
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig index ecbdf4ef00f4..95a634709a99 100644 --- a/drivers/thermal/st/Kconfig +++ b/drivers/thermal/st/Kconfig @@ -5,12 +5,14 @@ config ST_THERMAL tristate "Thermal sensors on STMicroelectronics STi series of SoCs" + depends on THERMAL_OF help Support for thermal sensors on STMicroelectronics STi series of SoCs. config ST_THERMAL_MEMMAP select ST_THERMAL tristate "STi series memory mapped access based thermal sensors" + depends on THERMAL_OF config STM32_THERMAL tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs" diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c index 5f33543a3a54..23597819ce84 100644 --- a/drivers/thermal/st/st_thermal.c +++ b/drivers/thermal/st/st_thermal.c @@ -12,6 +12,7 @@ #include <linux/of_device.h> #include "st_thermal.h" +#include "../thermal_hwmon.h" /* The Thermal Framework expects millidegrees */ #define mcelsius(temp) ((temp) * 1000) @@ -135,8 +136,6 @@ static struct thermal_zone_device_ops st_tz_ops = { .get_temp = st_thermal_get_temp, }; -static struct thermal_trip trip; - int st_thermal_register(struct platform_device *pdev, const struct of_device_id *st_thermal_of_match) { @@ -145,7 +144,6 @@ int st_thermal_register(struct platform_device *pdev, struct device_node *np = dev->of_node; const struct of_device_id *match; - int polling_delay; int ret; if (!np) { @@ -197,29 +195,22 @@ int st_thermal_register(struct platform_device *pdev, if (ret) goto sensor_off; - polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; - - trip.temperature = sensor->cdata->crit_temp; - trip.type = THERMAL_TRIP_CRITICAL; - sensor->thermal_dev = - thermal_zone_device_register_with_trips(dev_name(dev), &trip, 1, sensor, - &st_tz_ops, NULL, 0, polling_delay); + devm_thermal_of_zone_register(dev, 0, sensor, &st_tz_ops); if (IS_ERR(sensor->thermal_dev)) { - dev_err(dev, "failed to register thermal zone device\n"); + dev_err(dev, "failed to register thermal of zone\n"); ret = PTR_ERR(sensor->thermal_dev); goto sensor_off; } - ret = thermal_zone_device_enable(sensor->thermal_dev); - if (ret) - goto tzd_unregister; platform_set_drvdata(pdev, sensor); - return 0; + /* + * devm_thermal_of_zone_register() doesn't enable hwmon by default + * Enable it here + */ + return devm_thermal_add_hwmon_sysfs(dev, sensor->thermal_dev); -tzd_unregister: - thermal_zone_device_unregister(sensor->thermal_dev); sensor_off: st_thermal_sensor_off(sensor); @@ -232,7 +223,8 @@ void st_thermal_unregister(struct platform_device *pdev) struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); st_thermal_sensor_off(sensor); - thermal_zone_device_unregister(sensor->thermal_dev); + thermal_remove_hwmon_sysfs(sensor->thermal_dev); + devm_thermal_of_zone_unregister(sensor->dev, sensor->thermal_dev); } EXPORT_SYMBOL_GPL(st_thermal_unregister);
Switch to thermal_of_zone to handle thermal-zones. Replace thermal_zone_device_register() by devm_thermal_of_zone_register() and remove ops st_thermal_get_trip_type, st_thermal_get_trip_temp. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> --- Changes in v3: - Fix unmet dependency when building with ARM64 compiler https://lore.kernel.org/lkml/202406270605.qodaWd4n-lkp@intel.com/ - Remove no more used polling_delay variable detected by kernel robot https://lore.kernel.org/lkml/202406270530.kN5wIswi-lkp@intel.com/ Changes in v2: - Remove unused struct thermal_trip trip --- drivers/thermal/st/Kconfig | 2 ++ drivers/thermal/st/st_thermal.c | 28 ++++++++++------------------ 2 files changed, 12 insertions(+), 18 deletions(-)