new file mode 100644
@@ -0,0 +1,886 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============================================================================
+i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension
+===============================================================================
+
+:Copyright: |copy| 2024 NXP
+
+:Author: Peng Fan <peng.fan@nxp.com>
+
+The System Manager (SM) is a low-level system function which runs on a System
+Control Processor (SCP) to support isolation and management of power domains,
+clocks, resets, sensors, pins, etc. on complex application processors. It often
+runs on a Cortex-M processor and provides an abstraction to many of the
+underlying features of the hardware. The primary purpose of the SM is to allow
+isolation between software running on different cores in the SoC. It does this
+by having exclusive access to critical resources such as those controlling
+power, clocks, reset, PMIC, etc. and then providing an RPC interface to those
+clients. This allows the SM to provide access control, arbitration, and
+aggregation policies for those shared critical resources.
+
+SM introduces a concept Logic Machine(LM) which is analogous to VM and each has
+its own instance of SCMI. All normal SCMI calls only apply to that LM. That
+includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7)
+are completely isolated from the others and each LM has its own communication
+channels talking to the same SCMI server.
+
+This document covers all the information necessary to understand, maintain,
+port, and deploy the SM on supported processors.
+
+The SM implements an interface compliant with the Arm SCMI Specification
+with additional vendor specific extensions.
+
+SCMI_BBM: System Control and Management BBM Vendor Protocol
+==============================================================
+
+This protocol is intended provide access to the battery-backed module. This
+contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol
+can also provide access to similar functions implemented via external board
+components. The BBM protocol provides functions to:
+
+- Describe the protocol version.
+- Discover implementation attributes.
+- Read/write GPR
+- Discover the RTCs available in the system.
+- Read/write the RTC time in seconds and ticks
+- Set an alarm (per LM) in seconds
+- Get notifications on RTC update, alarm, or rollover.
+- Get notification on ON/OFF button activity.
+
+For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0.
+Board code can add additional GPR and RTC.
+
+GPR are not aggregated. The RTC time is also not aggregated. Setting these
+sets for all so normally exclusive access would be granted to one agent for
+each. However, RTC alarms are maintained for each LM and the hardware is
+programmed with the next nearest alarm time. So only one agent in an LM should
+be given access rights to set an RTC alarm.
+
+Commands:
+_________
+
+PROTOCOL_VERSION
+~~~~~~~~~~~~~~~~
+
+message_id: 0x0
+protocol_id: 0x81
+
++---------------+--------------------------------------------------------------+
+|Return values |
++---------------+--------------------------------------------------------------+
+|Name |Description |
++---------------+--------------------------------------------------------------+
+|int32 status | See ARM SCMI Specification for status code definitions. |
++---------------+--------------------------------------------------------------+
+|uint32 version | For this revision of the specification, this value must be |
+| | 0x10000. |
++---------------+--------------------------------------------------------------+
+
+PROTOCOL_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x1
+protocol_id: 0x81
+
++---------------+--------------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status | See ARM SCMI Specification for status code definitions. |
++------------------+-----------------------------------------------------------+
+|uint32 attributes | Bits[31:8] Number of RTCs. |
+| | Bits[15:0] Number of persistent storage (GPR) words. |
++------------------+-----------------------------------------------------------+
+
+PROTOCOL_MESSAGE_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x2
+protocol_id: 0x81
+
++---------------+--------------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: in case the message is implemented and available |
+| |to use. |
+| |NOT_FOUND: if the message identified by message_id is |
+| |invalid or not implemented |
++------------------+-----------------------------------------------------------+
+|uint32 attributes |Flags that are associated with a specific function in the |
+| |protocol. For all functions in this protocol, this |
+| |parameter has a value of 0 |
++------------------+-----------------------------------------------------------+
+
+BBM_GPR_SET
+~~~~~~~~~~~
+
+message_id: 0x3
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of GPR to write |
++------------------+-----------------------------------------------------------+
+|uint32 value |32-bit value to write to the GPR |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the GPR was successfully written. |
+| |NOT_FOUND: if the index is not valid. |
+| |DENIED: if the agent does not have permission to write |
+| |the specified GPR |
++------------------+-----------------------------------------------------------+
+
+BBM_GPR_GET
+~~~~~~~~~~~
+
+message_id: 0x4
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of GPR to read |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the GPR was successfully read. |
+| |NOT_FOUND: if the index is not valid. |
+| |DENIED: if the agent does not have permission to read |
+| |the specified GPR. |
++------------------+-----------------------------------------------------------+
+|uint32 value |32-bit value read from the GPR |
++------------------+-----------------------------------------------------------+
+
+BBM_RTC_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~
+
+message_id: 0x5
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of RTC |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: returned the attributes. |
+| |NOT_FOUND: Index is invalid. |
++------------------+-----------------------------------------------------------+
+|uint32 attributes |Bit[31:24] Bit width of RTC seconds. |
+| |Bit[23:16] Bit width of RTC ticks. |
+| |Bits[15:0] RTC ticks per second |
++------------------+-----------------------------------------------------------+
+|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length |
+| |describing the RTC name |
++------------------+-----------------------------------------------------------+
+
+BBM_RTC_TIME_SET
+~~~~~~~~~~~~~~~~
+
+message_id: 0x6
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of RTC |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] RTC time format: |
+| |Set to 1 if the time is in ticks. |
+| |Set to 0 if the time is in seconds |
++------------------+-----------------------------------------------------------+
+|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. |
+| |Upper word: Upper 32 bits of the time in seconds/ticks. |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: RTC time was successfully set. |
+| |NOT_FOUND: rtcId pertains to a non-existent RTC. |
+| |INVALID_PARAMETERS: time is not valid |
+| |(beyond the range of the RTC). |
+| |DENIED: the agent does not have permission to set the RTC. |
++------------------+-----------------------------------------------------------+
+
+BBM_RTC_TIME_GET
+~~~~~~~~~~~~~~~~
+
+message_id: 0x7
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of RTC |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] RTC time format: |
+| |Set to 1 if the time is in ticks. |
+| |Set to 0 if the time is in seconds |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: RTC time was successfully get. |
+| |NOT_FOUND: rtcId pertains to a non-existent RTC. |
++------------------+-----------------------------------------------------------+
+|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. |
+| |Upper word: Upper 32 bits of the time in seconds/ticks. |
++------------------+-----------------------------------------------------------+
+
+BBM_RTC_ALARM_SET
+~~~~~~~~~~~~~~~~~
+
+message_id: 0x8
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of RTC |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] RTC enable flag: |
+| |Set to 1 if the RTC alarm should be enabled. |
+| |Set to 0 if the RTC alarm should be disabled |
++------------------+-----------------------------------------------------------+
+|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. |
+| |Upper word: Upper 32 bits of the time in seconds. |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: RTC time was successfully set. |
+| |NOT_FOUND: rtcId pertains to a non-existent RTC. |
+| |INVALID_PARAMETERS: time is not valid |
+| |(beyond the range of the RTC). |
+| |DENIED: the agent does not have permission to set the RTC |
+| |alarm |
++------------------+-----------------------------------------------------------+
+
+BBM_BUTTON_GET
+~~~~~~~~~~~~~~
+
+message_id: 0x9
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the button status was read. |
+| |Other value: ARM SCMI Specification status code definitions|
++------------------+-----------------------------------------------------------+
+|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF |
++------------------+-----------------------------------------------------------+
+
+BBM_RTC_NOTIFY
+~~~~~~~~~~~~~~
+
+message_id: 0xA
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of RTC |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Notification flags |
+| |Bits[31:3] Reserved, must be zero. |
+| |Bit[2] Update enable: |
+| |Set to 1 to send notification. |
+| |Set to 0 if no notification. |
+| |Bit[1] Rollover enable: |
+| |Set to 1 to send notification. |
+| |Set to 0 if no notification. |
+| |Bit[0] Alarm enable: |
+| |Set to 1 to send notification. |
+| |Set to 0 if no notification |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: notification configuration was successfully |
+| |updated. |
+| |NOT_FOUND: rtcId pertains to a non-existent RTC. |
+| |DENIED: the agent does not have permission to request RTC |
+| |notifications. |
++------------------+-----------------------------------------------------------+
+
+BBM_BUTTON_NOTIFY
+~~~~~~~~~~~~~~~~~
+
+message_id: 0xB
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Notification flags |
+| |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] Enable button: |
+| |Set to 1 to send notification. |
+| |Set to 0 if no notification |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: notification configuration was successfully |
+| |updated. |
+| |DENIED: the agent does not have permission to request |
+| |button notifications. |
++------------------+-----------------------------------------------------------+
+
+NEGOTIATE_PROTOCOL_VERSION
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x10
+protocol_id: 0x81
+
++--------------------+---------------------------------------------------------+
+|Parameters |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|uint32 version |The negotiated protocol version the agent intends to use |
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: if the negotiated protocol version is supported |
+| |by the platform. All commands, responses, and |
+| |notifications post successful return of this command must|
+| |comply with the negotiated version. |
+| |NOT_SUPPORTED: if the protocol version is not supported. |
++--------------------+---------------------------------------------------------+
+
+Notifications
+_____________
+
+BBM_RTC_EVENT
+~~~~~~~~~~~~~
+
+message_id: 0x0
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 flags |RTC events: |
+| |Bits[31:2] Reserved, must be zero. |
+| |Bit[1] RTC rollover notification: |
+| |1 RTC rollover detected. |
+| |0 no RTC rollover detected. |
+| |Bit[0] RTC alarm notification: |
+| |1 RTC alarm generated. |
+| |0 no RTC alarm generated. |
++------------------+-----------------------------------------------------------+
+
+BBM_BUTTON_EVENT
+~~~~~~~~~~~~~~~~
+
+message_id: 0x1
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 flags |RTC events: |
++------------------+-----------------------------------------------------------+
+| |Button events: |
+| |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] Button notification: |
+| |1 button change detected. |
+| |0 no button change detected. |
++------------------+-----------------------------------------------------------+
+
+SCMI_MISC: System Control and Management MISC Vendor Protocol
+================================================================
+
+Provides miscellaneous functions. This includes controls that are miscellaneous
+settings/actions that must be exposed from the SM to agents. They are device
+specific and are usually define to access bit fields in various mix block
+control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol
+supports the following functions:
+
+- Describe the protocol version.
+- Discover implementation attributes.
+- Set/Get a control.
+- Initiate an action on a control.
+- Obtain platform (i.e. SM) build information.
+- Obtain ROM passover data.
+- Read boot/shutdown/reset information for the LM or the system.
+
+Commands:
+_________
+
+PROTOCOL_VERSION
+~~~~~~~~~~~~~~~~
+
+message_id: 0x0
+protocol_id: 0x84
+
++---------------+--------------------------------------------------------------+
+|Return values |
++---------------+--------------------------------------------------------------+
+|Name |Description |
++---------------+--------------------------------------------------------------+
+|int32 status | See ARM SCMI Specification for status code definitions. |
++---------------+--------------------------------------------------------------+
+|uint32 version | For this revision of the specification, this value must be |
+| | 0x10000. |
++---------------+--------------------------------------------------------------+
+
+PROTOCOL_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x1
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status | See ARM SCMI Specification for status code definitions. |
++------------------+-----------------------------------------------------------+
+|uint32 attributes |Protocol attributes: |
+| |Bits[31:24] Reserved, must be zero. |
+| |Bits[23:16] Number of reset reasons. |
+| |Bits[15:0] Number of controls |
++------------------+-----------------------------------------------------------+
+
+PROTOCOL_MESSAGE_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x2
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: in case the message is implemented and available |
+| |to use. |
+| |NOT_FOUND: if the message identified by message_id is |
+| |invalid or not implemented |
++------------------+-----------------------------------------------------------+
+|uint32 attributes |Flags that are associated with a specific function in the |
+| |protocol. For all functions in this protocol, this |
+| |parameter has a value of 0 |
++------------------+-----------------------------------------------------------+
+
+MISC_CONTROL_SET
+~~~~~~~~~~~~~~~~
+
+message_id: 0x3
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of the control |
++------------------+-----------------------------------------------------------+
+|uint32 num |Size of the value data in words |
++------------------+-----------------------------------------------------------+
+|uint32 val[8] |value data array |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the control was set successfully. |
+| |NOT_FOUND: if the index is not valid. |
+| |DENIED: if the agent does not have permission to set the |
+| |control |
++------------------+-----------------------------------------------------------+
+
+MISC_CONTROL_GET
+~~~~~~~~~~~~~~~~
+
+message_id: 0x4
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of the control |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the control was get successfully. |
+| |NOT_FOUND: if the index is not valid. |
+| |DENIED: if the agent does not have permission to get the |
+| |control |
++------------------+-----------------------------------------------------------+
+|uint32 num |Size of the return data in words, max 8 |
++------------------+-----------------------------------------------------------+
+|uint32 | |
+|val[0, num - 1] |value data array |
++------------------+-----------------------------------------------------------+
+
+MISC_CONTROL_ACTION
+~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x5
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of the control |
++------------------+-----------------------------------------------------------+
+|uint32 action |Action for the control |
++------------------+-----------------------------------------------------------+
+|uint32 numarg |Size of the argument data, max 8 |
++------------------+-----------------------------------------------------------+
+|uint32 | |
+|arg[0, numarg -1] |Argument data array |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the action was set successfully. |
+| |NOT_FOUND: if the index is not valid. |
+| |DENIED: if the agent does not have permission to get the |
+| |control |
++------------------+-----------------------------------------------------------+
+|uint32 num |Size of the return data in words, max 8 |
++------------------+-----------------------------------------------------------+
+|uint32 | |
+|val[0, num - 1] |value data array |
++------------------+-----------------------------------------------------------+
+
+MISC_DISCOVER_BUILD_INFO
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+This function is used to obtain the build commit, data, time, number.
+
+message_id: 0x6
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the build info was got successfully. |
+| |NOT_SUPPORTED: if the data is not available. |
++------------------+-----------------------------------------------------------+
+|uint32 buildnum |Build number |
++------------------+-----------------------------------------------------------+
+|uint32 buildcommit|Most significant 32 bits of the git commit hash |
++------------------+-----------------------------------------------------------+
+|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 |
+| |bytes in length |
++------------------+-----------------------------------------------------------+
+|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 |
+| |bytes in length |
++------------------+-----------------------------------------------------------+
+
+MISC_ROM_PASSOVER_GET
+~~~~~~~~~~~~~~~~~~~~~
+
+ROM passover data is information exported by ROM and could be used by others.
+It includes boot device, instance, type, mode and etc. This function is used
+to obtain the ROM passover data. The returned block of words is structured as
+defined in the ROM passover section in the SoC RM.
+
+message_id: 0x7
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if the data was got successfully. |
+| |NOT_SUPPORTED: if the data is not available. |
++------------------+-----------------------------------------------------------+
+|uint32 num |Size of the passover data in words, max 13 |
++------------------+-----------------------------------------------------------+
+|uint32_t | |
+|data[0, num - 1] |Passover data array |
++------------------+-----------------------------------------------------------+
+
+MISC_CONTROL_NOTIFY
+~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x8
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 index |Index of control |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Notification flags, varies by control |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: notification configuration was successfully |
+| |updated. |
+| |NOT_FOUND: control id not exists. |
+| |INVALID_PARAMETERS: if the input attributes flag specifies |
+| |unsupported or invalid configurations.. |
+| |DENIED: if the calling agent is not permitted to request |
+| |the notification. |
++------------------+-----------------------------------------------------------+
+
+MISC_RESET_REASON_ATTRIBUTES
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x9
+protocol_id: 0x84
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 reasonid |Identifier for the reason |
++------------------+-----------------------------------------------------------+
+|Return values |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|int32 status |SUCCESS: if valid reason attributes are returned |
+| |NOT_FOUND: if reasonId pertains to a non-existent reason. |
++------------------+-----------------------------------------------------------+
+|uint32 attributes |Reason attributes. This parameter has the following |
+| |format: Bits[31:0] Reserved, must be zero |
+| |Bits[15:0] Number of persistent storage (GPR) words. |
++------------------+-----------------------------------------------------------+
+|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length |
+| |describing the reason |
++------------------+-----------------------------------------------------------+
+
+MISC_RESET_REASON_GET
+~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0xA
+protocol_id: 0x84
+
++--------------------+---------------------------------------------------------+
+|Parameters |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|uint32 flags |Reason flags. This parameter has the following format: |
+| |Bits[31:1] Reserved, must be zero. |
+| |Bit[0] System: |
+| |Set to 1 to return the system reason. |
+| |Set to 0 to return the LM reason |
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: reset reason return |
++--------------------+---------------------------------------------------------+
+|uint32 bootflags |Boot reason flags. This parameter has the format: |
+| |Bits[31] Valid. |
+| |Set to 1 if the entire reason is valid. |
+| |Set to 0 if the entire reason is not valid. |
+| |Bits[30:29] Reserved, must be zero. |
+| |Bit[28] Valid origin: |
+| |Set to 1 if the origin field is valid. |
+| |Set to 0 if the origin field is not valid. |
+| |Bits[27:24] Origin. |
+| |Bit[23] Valid err ID: |
+| |Set to 1 if the error ID field is valid. |
+| |Set to 0 if the error ID field is not valid. |
+| |Bits[22:8] Error ID. |
+| |Bit[7:0] Reason |
++--------------------+---------------------------------------------------------+
+|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: |
+| |Bits[31] Valid. |
+| |Set to 1 if the entire reason is valid. |
+| |Set to 0 if the entire reason is not valid. |
+| |Bits[30:29] Number of valid extended info words. |
+| |Bit[28] Valid origin: |
+| |Set to 1 if the origin field is valid. |
+| |Set to 0 if the origin field is not valid. |
+| |Bits[27:24] Origin. |
+| |Bit[23] Valid err ID: |
+| |Set to 1 if the error ID field is valid. |
+| |Set to 0 if the error ID field is not valid. |
+| |Bits[22:8] Error ID. |
+| |Bit[7:0] Reason |
++--------------------+---------------------------------------------------------+
+|uint32 extinfo[8] |Array of extended info words |
++--------------------+---------------------------------------------------------+
+
+MISC_SI_INFO_GET
+~~~~~~~~~~~~~~~~
+
+message_id: 0xB
+protocol_id: 0x84
+
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: silicon info return |
++--------------------+---------------------------------------------------------+
+|uint32 deviceid |Silicon specific device ID |
++--------------------+---------------------------------------------------------+
+|uint32 sirev |Silicon specific revision |
++--------------------+---------------------------------------------------------+
+|uint32 partnum |Silicon specific part number |
++--------------------+---------------------------------------------------------+
+|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up|
+| |to 16 bytes in length |
++--------------------+---------------------------------------------------------+
+
+MISC_CFG_INFO_GET
+~~~~~~~~~~~~~~~~~
+
+message_id: 0xC
+protocol_id: 0x84
+
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: config name return |
+| |NOT_SUPPORTED: name not available |
++--------------------+---------------------------------------------------------+
+|uint32 msel |Mode selector value |
++--------------------+---------------------------------------------------------+
+|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up |
+| |to 16 bytes in length |
++--------------------+---------------------------------------------------------+
+
+MISC_SYSLOG_GET
+~~~~~~~~~~~~~~~
+
+message_id: 0xD
+protocol_id: 0x84
+
++--------------------+---------------------------------------------------------+
+|Parameters |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|uint32 flags |Device specific flags that might impact the data returned|
+| |or clearing of the data |
++--------------------+---------------------------------------------------------+
+|uint32 logindex |Index to the first log word. Will be the first element in|
+| |the return array |
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: system log return |
++--------------------+---------------------------------------------------------+
+|uint32 numLogflags |Descriptor for the log data returned by this call. |
+| |Bits[31:20] Number of remaining log words. |
+| |Bits[15:12] Reserved, must be zero. |
+| |Bits[11:0] Number of log words that are returned by this |
+| |call |
++--------------------+---------------------------------------------------------+
+|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags|
++--------------------+---------------------------------------------------------+
+
+NEGOTIATE_PROTOCOL_VERSION
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+message_id: 0x10
+protocol_id: 0x84
+
++--------------------+---------------------------------------------------------+
+|Parameters |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|uint32 version |The negotiated protocol version the agent intends to use |
++--------------------+---------------------------------------------------------+
+|Return values |
++--------------------+---------------------------------------------------------+
+|Name |Description |
++--------------------+---------------------------------------------------------+
+|int32 status |SUCCESS: if the negotiated protocol version is supported |
+| |by the platform. All commands, responses, and |
+| |notifications post successful return of this command must|
+| |comply with the negotiated version. |
+| |NOT_SUPPORTED: if the protocol version is not supported. |
++--------------------+---------------------------------------------------------+
+
+Notifications
+_____________
+
+MISC_CONTROL_EVENT
+~~~~~~~~~~~~~~~~~~
+
+message_id: 0x0
+protocol_id: 0x81
+
++------------------+-----------------------------------------------------------+
+|Parameters |
++------------------+-----------------------------------------------------------+
+|Name |Description |
++------------------+-----------------------------------------------------------+
+|uint32 ctrlid |Identifier for the control that caused the event. |
++------------------+-----------------------------------------------------------+
+|uint32 flags |Event flags, varies by control. |
++------------------+-----------------------------------------------------------+