diff mbox series

[v3,3/3] arm64: dts: rockchip: add Firefly JD4 baseboard with Core-PX30-JD4 SoM

Message ID 20240718-rockchip-px30-firefly-v3-3-3835cdd22eae@collabora.com (mailing list archive)
State New, archived
Headers show
Series Add support for Firefly Core-PX30-JD4 SoM & baseboard | expand

Commit Message

Christopher Obbard July 18, 2024, 8:40 a.m. UTC
The Firefly MB-PX30-JD4 is a baseboard for the Core-PX30-JD4 SoM.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
---
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../boot/dts/rockchip/px30-firefly-jd4-core-mb.dts | 179 +++++++++++++++++++++
 2 files changed, 180 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index fda1b980eb4bc..4861987457a42 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -3,6 +3,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts
new file mode 100644
index 0000000000000..e109988f4e6be
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts
@@ -0,0 +1,179 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "px30-firefly-jd4-core.dtsi"
+
+/ {
+	model = "Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard";
+	compatible = "firefly,px30-jd4-core-mb", "firefly,px30-jd4-core",
+		   "rockchip,px30";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led>, <&green_led>;
+
+		blue-led {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "px30-mb-jd4:blue:work";
+			linux,default-trigger = "heartbeat";
+		};
+
+		green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+			label = "px30-mb-jd4:blue:diy";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		blue_led: blue-led {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		green_led: green-led {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};