diff mbox series

[v2,03/14] arm64: dts: rockchip: enable uart0 on Qnap-TS433

Message ID 20240721173723.919961-4-heiko@sntech.de (mailing list archive)
State New, archived
Headers show
Series Expand available features on Qnap TS433 | expand

Commit Message

Heiko Stuebner July 21, 2024, 5:37 p.m. UTC
Uart0 is connected to an MCU on the board that handles system control
like the fan-speed. So far no driver for it is available though.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 0636a08986572..f3ce3cc4598db 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -102,6 +102,10 @@  &sdhci {
 	status = "okay";
 };
 
+&uart0 {
+	status = "okay";
+};
+
 /*
  * Pins available on CN3 connector at TTL voltage level (3V3).
  * ,_  _.