diff mbox series

[V2,05/16] pmdomain: raspberrypi-power: set flag GENPD_FLAG_ACTIVE_WAKEUP

Message ID 20240728114200.75559-6-wahrenst@gmx.net (mailing list archive)
State New, archived
Headers show
Series ARM: bcm2835: Implement initial S2Idle for Raspberry Pi | expand

Commit Message

Stefan Wahren July 28, 2024, 11:41 a.m. UTC
Set flag GENPD_FLAG_ACTIVE_WAKEUP to rpi_power genpd, then when a device
is set as wakeup source using device_set_wakeup_enable, the power
domain could be kept on to make sure the device could wakeup the system.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/pmdomain/bcm/raspberrypi-power.c | 1 +
 1 file changed, 1 insertion(+)

--
2.34.1

Comments

Stefan Wahren Aug. 12, 2024, 9:04 p.m. UTC | #1
Hi,

Am 28.07.24 um 13:41 schrieb Stefan Wahren:
> Set flag GENPD_FLAG_ACTIVE_WAKEUP to rpi_power genpd, then when a device
> is set as wakeup source using device_set_wakeup_enable, the power
> domain could be kept on to make sure the device could wakeup the system.
>
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
I know a lot developer are in holidays, but it would be nice to get a
review for the new pmdomain parts before i send V3.

Best regards
> ---
>   drivers/pmdomain/bcm/raspberrypi-power.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pmdomain/bcm/raspberrypi-power.c b/drivers/pmdomain/bcm/raspberrypi-power.c
> index fadedfc9c645..b87ea7adb7be 100644
> --- a/drivers/pmdomain/bcm/raspberrypi-power.c
> +++ b/drivers/pmdomain/bcm/raspberrypi-power.c
> @@ -91,6 +91,7 @@ static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
>   	dom->fw = rpi_domains->fw;
>
>   	dom->base.name = name;
> +	dom->base.flags = GENPD_FLAG_ACTIVE_WAKEUP;
>   	dom->base.power_on = rpi_domain_on;
>   	dom->base.power_off = rpi_domain_off;
>
> --
> 2.34.1
>
Ulf Hansson Aug. 14, 2024, 12:25 p.m. UTC | #2
On Sun, 28 Jul 2024 at 13:47, Stefan Wahren <wahrenst@gmx.net> wrote:
>
> Set flag GENPD_FLAG_ACTIVE_WAKEUP to rpi_power genpd, then when a device
> is set as wakeup source using device_set_wakeup_enable, the power
> domain could be kept on to make sure the device could wakeup the system.
>
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>

Patch 3 -> 5, applied for next to my pmdomain tree, thanks!

Kind regards
Uffe


> ---
>  drivers/pmdomain/bcm/raspberrypi-power.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pmdomain/bcm/raspberrypi-power.c b/drivers/pmdomain/bcm/raspberrypi-power.c
> index fadedfc9c645..b87ea7adb7be 100644
> --- a/drivers/pmdomain/bcm/raspberrypi-power.c
> +++ b/drivers/pmdomain/bcm/raspberrypi-power.c
> @@ -91,6 +91,7 @@ static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
>         dom->fw = rpi_domains->fw;
>
>         dom->base.name = name;
> +       dom->base.flags = GENPD_FLAG_ACTIVE_WAKEUP;
>         dom->base.power_on = rpi_domain_on;
>         dom->base.power_off = rpi_domain_off;
>
> --
> 2.34.1
>
>
diff mbox series

Patch

diff --git a/drivers/pmdomain/bcm/raspberrypi-power.c b/drivers/pmdomain/bcm/raspberrypi-power.c
index fadedfc9c645..b87ea7adb7be 100644
--- a/drivers/pmdomain/bcm/raspberrypi-power.c
+++ b/drivers/pmdomain/bcm/raspberrypi-power.c
@@ -91,6 +91,7 @@  static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
 	dom->fw = rpi_domains->fw;

 	dom->base.name = name;
+	dom->base.flags = GENPD_FLAG_ACTIVE_WAKEUP;
 	dom->base.power_on = rpi_domain_on;
 	dom->base.power_off = rpi_domain_off;