diff mbox series

[v2,2/2] PCI: j721e: Enable ACSPCIE Refclk if "ti,syscon-acspcie-proxy-ctrl" exists

Message ID 20240729092855.1945700-3-s-vadapalli@ti.com (mailing list archive)
State New, archived
Headers show
Series Add ACSPCIE refclk support on J784S4-EVM | expand

Commit Message

Siddharth Vadapalli July 29, 2024, 9:28 a.m. UTC
The ACSPCIE module is capable of driving the reference clock required by
the PCIe Endpoint device. It is an alternative to on-board and external
reference clock generators. Enabling the output from the ACSPCIE module's
PAD IO Buffers requires clearing the "PAD IO disable" bits of the
ACSPCIE_PROXY_CTRL register in the CTRL_MMR register space.

Add support to enable the ACSPCIE reference clock output using the optional
device-tree property "ti,syscon-acspcie-proxy-ctrl".

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---

v1:
https://lore.kernel.org/r/20240715120936.1150314-4-s-vadapalli@ti.com/
Changes since v1:
- Addressed Bjorn's feedback at:
  https://lore.kernel.org/r/20240725211841.GA859405@bhelgaas/
  with the following changes:
  1) Updated $subject and commit message to indicate that this patch
  enables ACSPCIE reference clock output if the DT property is present.
  2) Updated macro and comments to indicate that the BITS correspond to
  disabling ACSPCIE output, due to which clearing them enables the
  reference clock output.
  3) Replaced "PAD" with "refclk" both in the function name and in the
  error prints.
  4) Wrapped lines to be within the 80 character limit to match the rest
  of the driver.

 drivers/pci/controller/cadence/pci-j721e.c | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 85718246016b..ed42b2229483 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -44,6 +44,7 @@  enum link_status {
 #define J721E_MODE_RC			BIT(7)
 #define LANE_COUNT(n)			((n) << 8)
 
+#define ACSPCIE_PAD_DISABLE_MASK	GENMASK(1, 0)
 #define GENERATION_SEL_MASK		GENMASK(1, 0)
 
 struct j721e_pcie {
@@ -220,6 +221,34 @@  static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 	return ret;
 }
 
+static int j721e_enable_acspcie_refclk(struct j721e_pcie *pcie,
+				       struct regmap *syscon)
+{
+	struct device *dev = pcie->cdns_pcie->dev;
+	struct device_node *node = dev->of_node;
+	u32 mask = ACSPCIE_PAD_DISABLE_MASK;
+	struct of_phandle_args args;
+	u32 val;
+	int ret;
+
+	ret = of_parse_phandle_with_fixed_args(node,
+					       "ti,syscon-acspcie-proxy-ctrl",
+					       1, 0, &args);
+	if (!ret) {
+		/* Clear PAD IO disable bits to enable refclk output */
+		val = ~(args.args[0]);
+		ret = regmap_update_bits(syscon, 0, mask, val);
+		if (ret)
+			dev_err(dev, "failed to enable ACSPCIE refclk: %d\n",
+				ret);
+	} else {
+		dev_err(dev,
+			"ti,syscon-acspcie-proxy-ctrl has invalid arguments\n");
+	}
+
+	return ret;
+}
+
 static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 {
 	struct device *dev = pcie->cdns_pcie->dev;
@@ -259,6 +288,15 @@  static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 		return ret;
 	}
 
+	/* Enable ACSPCIE refclk output if the optional property exists */
+	syscon = syscon_regmap_lookup_by_phandle_optional(node,
+						"ti,syscon-acspcie-proxy-ctrl");
+	if (syscon) {
+		ret = j721e_enable_acspcie_refclk(pcie, syscon);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }