@@ -42,7 +42,7 @@ properties:
minItems: 1
description:
phandle to rcpm node, Please refer
- Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+ Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
new file mode 100644
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,rcpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Run Control and Power Management
+
+description:
+ The RCPM performs all device-level tasks associated with device run control
+ and power management.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,ls1012a-rcpm
+ - fsl,ls1021a-rcpm
+ - fsl,ls1028a-rcpm
+ - fsl,ls1043a-rcpm
+ - fsl,ls1045a-rcpm
+ - fsl,p2041-rcpm
+ - fsl,p5020-rcpm
+ - fsl,t4240-rcpm
+ - enum:
+ - fsl,qoriq-rcpm-1.0
+ - fsl,qoriq-rcpm-2.0
+ - fsl,qoriq-rcpm-2.1
+ - fsl,qoriq-rcpm-2.1+
+ minItems: 1
+ description: |
+ All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+ which the chip complies.
+ Chassis Version Example Chips
+ --------------- -------------------------------
+ 1.0 p4080, p5020, p5040, p2041, p3041
+ 2.0 t4240, b4860, b4420
+ 2.1 t1040,
+ 2.1+ ls1021a, ls1012a, ls1043a, ls1046a
+
+ reg:
+ maxItems: 1
+
+ "#fsl,rcpm-wakeup-cells":
+ description: |
+ The number of IPPDEXPCR register cells in the
+ fsl,rcpm-wakeup property.
+
+ Freescale RCPM Wakeup Source Device Tree Bindings
+
+ Required fsl,rcpm-wakeup property should be added to a device node if
+ the device can be used as a wakeup source.
+
+ fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+ register cells. The number of IPPDEXPCR register cells is defined in
+ "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ the bit mask that should be set in IPPDEXPCR0, and the second register
+ cell is for IPPDEXPCR1, and so on.
+
+ Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+ mechanism for keeping certain blocks awake during STANDBY and MEM, in
+ order to use them as wake-up sources.
+
+ little-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ RCPM register block is Little Endian. Without it RCPM
+ will be Big Endian (default case).
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+ reg = <0xe2000 0x1000>;
+ #fsl,rcpm-wakeup-cells = <2>;
+ };
+
+ serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x2950000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
+ };
deleted file mode 100644
@@ -1,69 +0,0 @@
-* Run Control and Power Management
--------------------------------------------
-The RCPM performs all device-level tasks associated with device run control
-and power management.
-
-Required properites:
- - reg : Offset and length of the register set of the RCPM block.
- - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
- fsl,rcpm-wakeup property.
- - compatible : Must contain a chip-specific RCPM block compatible string
- and (if applicable) may contain a chassis-version RCPM compatible
- string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
- such as:
- * "fsl,p2041-rcpm"
- * "fsl,p5020-rcpm"
- * "fsl,t4240-rcpm"
-
- Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
- such as:
- * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
- * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
- * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
- * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-Chassis Version Example Chips
---------------- -------------------------------
-1.0 p4080, p5020, p5040, p2041, p3041
-2.0 t4240, b4860, b4420
-2.1 t1040,
-2.1+ ls1021a, ls1012a, ls1043a, ls1046a
-
-Optional properties:
- - little-endian : RCPM register block is Little Endian. Without it RCPM
- will be Big Endian (default case).
-
-Example:
-The RCPM node for T4240:
- rcpm: global-utilities@e2000 {
- compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
- reg = <0xe2000 0x1000>;
- #fsl,rcpm-wakeup-cells = <2>;
- };
-
-* Freescale RCPM Wakeup Source Device Tree Bindings
--------------------------------------------
-Required fsl,rcpm-wakeup property should be added to a device node if the device
-can be used as a wakeup source.
-
- - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
- register cells. The number of IPPDEXPCR register cells is defined in
- "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
- the bit mask that should be set in IPPDEXPCR0, and the second register
- cell is for IPPDEXPCR1, and so on.
-
- Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
- mechanism for keeping certain blocks awake during STANDBY and MEM, in
- order to use them as wake-up sources.
-
-Example:
- lpuart0: serial@2950000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2950000 0x0 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
- };
Convert dt-binding rcpm from txt to yaml format. Add fsl,ls1028a-rcpm compatible string. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../bindings/rtc/fsl,ls-ftm-alarm.yaml | 2 +- .../devicetree/bindings/soc/fsl/fsl,rcpm.yaml | 91 +++++++++++++++++++ .../devicetree/bindings/soc/fsl/rcpm.txt | 69 -------------- 3 files changed, 92 insertions(+), 70 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml delete mode 100644 Documentation/devicetree/bindings/soc/fsl/rcpm.txt