From patchwork Tue Jul 30 09:53:54 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manorit Chawdhry X-Patchwork-Id: 13747174 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 48167C3DA61 for ; Tue, 30 Jul 2024 09:56:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:CC:To:In-Reply-To:References :Message-ID:Content-Transfer-Encoding:Content-Type:MIME-Version:Subject:Date: From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=WwwAfJQLh+CX69UgGEeaQjGRObamdpO7Fp4e4QR92BA=; b=MCjbep5VzAbRC1Vj5PEslwD2+d UThlcrL8kx5OsFNWTdoSvfjWrWxMIF6cT8uO6jZBxqWBzQbczkfnMjHoanomo++UclDoZ/cAIowBb lv3sTQ4BdJGHk5+XE48W8rQTW3kIl1K2k3RurVmVP19CGNyYVuUcgq6TX3qWdK23pTqEQ6OG7nXUq voITHOuIS8mMXJL6m5lJaxR0XIzjQ/I34iYNzj0ftmQYZgJIjW5abDJygnTpVh8dyVoqSo26DXfyU Lnxb3wusP+R1vRLwQh8+8C/CdihjFH8O6cKVvS5+/roS6LyEsT6eEBlHsWeGmGvVqvsWdMhofg6Lw Vwi1DCjg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sYjaZ-0000000EcwU-45gF; Tue, 30 Jul 2024 09:56:15 +0000 Received: from fllv0015.ext.ti.com ([198.47.19.141]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sYjYk-0000000EcPo-1pHF for linux-arm-kernel@lists.infradead.org; Tue, 30 Jul 2024 09:54:24 +0000 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 46U9sJM2006281; Tue, 30 Jul 2024 04:54:19 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1722333259; bh=WwwAfJQLh+CX69UgGEeaQjGRObamdpO7Fp4e4QR92BA=; h=From:Date:Subject:References:In-Reply-To:To:CC; b=GM6Zc8E6gf05sh4IvtwHgg+rqbg843oZ1PmiMhyacox3WgPe1rg6TfsZoXXAHAqX1 G+Mc6vdJ28t33NJs75hRKte3xzFvjEJ9su0GTGWTwGji4YfmklHo744y2O/k0tvU4q 21Hq4i2DYdUsWs+ow5S4x544QdpfxzBRyM9lOZg0= Received: from DFLE111.ent.ti.com (dfle111.ent.ti.com [10.64.6.32]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 46U9sJPL064070 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 30 Jul 2024 04:54:19 -0500 Received: from DFLE107.ent.ti.com (10.64.6.28) by DFLE111.ent.ti.com (10.64.6.32) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Tue, 30 Jul 2024 04:54:18 -0500 Received: from lelvsmtp5.itg.ti.com (10.180.75.250) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Tue, 30 Jul 2024 04:54:18 -0500 Received: from [127.0.1.1] (uda0497581.dhcp.ti.com [10.24.68.185]) by lelvsmtp5.itg.ti.com (8.15.2/8.15.2) with ESMTP id 46U9rum0008969; Tue, 30 Jul 2024 04:54:14 -0500 From: Manorit Chawdhry Date: Tue, 30 Jul 2024 15:23:54 +0530 Subject: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties MIME-Version: 1.0 Message-ID: <20240730-b4-upstream-bootph-all-v3-4-9bc2eccb6952@ti.com> References: <20240730-b4-upstream-bootph-all-v3-0-9bc2eccb6952@ti.com> In-Reply-To: <20240730-b4-upstream-bootph-all-v3-0-9bc2eccb6952@ti.com> To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , Neha Malcom Francis , Aniket Limaye , Udit Kumar , Beleswar Padhi , Siddharth Vadapalli , Manorit Chawdhry X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=ed25519-sha256; t=1722333236; l=13556; i=m-chawdhry@ti.com; s=20231127; h=from:subject:message-id; bh=3KF+t7Q5dc9YCr0c7QejodgMpjK0oFWD33xpjQUT/gQ=; b=BGwP9H6kIR0xVVkTBVMh+P4eDS8b56KLzX+Ix8fHmy+f4E/G0vSkhFweDcwE3nuLl4Bz1ELGw ZWhtQ0Uov1qAAsGTfNxD2B0edy89hPh0lSWofgePwIe9WDT790kt2kf X-Developer-Key: i=m-chawdhry@ti.com; a=ed25519; pk=fsr6Tm39TvsTgfyfFQLk+nnqIz2sBA1PthfqqfiiYSs= X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240730_025422_609555_7B4C0DFA X-CRM114-Status: GOOD ( 11.24 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Adds bootph-* properties to the leaf nodes to enable U-boot to utilise them. Signed-off-by: Manorit Chawdhry Reviewed-by: Neha Malcom Francis --- .../arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++++++++ arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 18 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 5 +++++ 5 files changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8230d53cd696..ebc9ab3b6790 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -193,6 +193,7 @@ J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */ J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -234,6 +235,7 @@ J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ >; + bootph-all; }; vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { @@ -247,6 +249,7 @@ main_usbss0_pins_default: main-usbss0-default-pins { J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; + bootph-all; }; main_usbss1_pins_default: main-usbss1-default-pins { @@ -272,6 +275,7 @@ main_i2c0_pins_default: main-i2c0-default-pins { J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; + bootph-all; }; main_i2c1_pins_default: main-i2c1-default-pins { @@ -342,6 +346,7 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ >; + bootph-all; }; mcu_uart0_pins_default: mcu-uart0-default-pins { @@ -351,6 +356,7 @@ J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */ J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-all; }; sw11_button_pins_default: sw11-button-default-pins { @@ -370,6 +376,7 @@ J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -427,6 +434,7 @@ wkup_gpio_pins_default: wkup-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */ >; + bootph-all; }; }; @@ -435,12 +443,14 @@ &wkup_uart0 { status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart0 { @@ -449,6 +459,7 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &main_uart1 { @@ -473,6 +484,7 @@ &wkup_gpio0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wkup_gpio_pins_default>; + bootph-all; }; &main_gpio0 { @@ -489,6 +501,7 @@ &main_sdhci0 { non-removable; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &main_sdhci1 { @@ -500,10 +513,12 @@ &main_sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &usb_serdes_mux { idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ + bootph-all; }; &serdes_ln_ctrl { @@ -513,6 +528,7 @@ &serdes_ln_ctrl { , , , , , ; + bootph-all; }; &serdes_wiz3 { @@ -534,6 +550,7 @@ &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; ti,vbus-divider; + bootph-all; }; &usb0 { @@ -541,6 +558,7 @@ &usb0 { maximum-speed = "super-speed"; phys = <&serdes3_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &usbss1 { @@ -569,6 +587,7 @@ flash@0 { cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; + bootph-all; partitions { compatible = "fixed-partitions"; @@ -650,6 +669,7 @@ exp2: gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + bootph-all; p09-hog { /* P11 - MCASP/TRACE_MUX_S0 */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 0da785be80ff..584badcb796d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -226,6 +226,7 @@ secure_proxy_main: mailbox@32c00000 { <0x00 0x32800000 0x00 0x100000>; interrupt-names = "rx_011"; interrupts = ; + bootph-all; }; smmu0: iommu@36600000 { @@ -2854,5 +2855,6 @@ main_esm: esm@700000 { compatible = "ti,j721e-esm"; reg = <0x0 0x700000 0x0 0x1000>; ti,esm-pins = <344>, <345>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 6b6ef6a30614..6ecbf5ee8b78 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -21,16 +21,19 @@ dmsc: system-controller@44083000 { k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -61,6 +64,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; }; @@ -115,6 +119,7 @@ mcu_timer0: timer@40400000 { ti,timer-pwm; /* Non-MPU Firmware usage */ status = "reserved"; + bootph-pre-ram; }; mcu_timer1: timer@40410000 { @@ -475,6 +480,7 @@ mcu_ringacc: ringacc@2b800000 { ti,sci = <&dmsc>; ti,sci-dev-id = <235>; msi-parent = <&main_udmass_inta>; + bootph-all; }; mcu_udmap: dma-controller@285c0000 { @@ -499,6 +505,7 @@ mcu_udmap: dma-controller@285c0000 { ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ <0x0b>; /* RX_HCHAN */ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + bootph-all; }; }; @@ -515,6 +522,7 @@ secure_proxy_mcu: mailbox@2a480000 { * firmware on non-MPU processors */ status = "disabled"; + bootph-pre-ram; }; mcu_cpsw: ethernet@46000000 { @@ -687,6 +695,7 @@ wkup_vtm0: temperature-sensor@42040000 { <0x00 0x43000300 0x00 0x10>; power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; + bootph-pre-ram; }; mcu_esm: esm@40800000 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 89fbfb21e5d3..b63d48719090 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -346,6 +346,7 @@ J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ >; + bootph-all; }; main_uart0_pins_default: main-uart0-default-pins { @@ -355,6 +356,7 @@ J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -390,12 +392,14 @@ main_usbss0_pins_default: main-usbss0-default-pins { J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; + bootph-all; }; main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; + bootph-all; }; main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { @@ -594,6 +598,7 @@ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ >; + bootph-all; }; vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { @@ -622,6 +627,7 @@ J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-pre-ram; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { @@ -629,6 +635,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -657,6 +664,7 @@ &wkup_uart0 { status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &wkup_i2c0 { @@ -821,6 +829,7 @@ &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart0 { @@ -829,6 +838,7 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &main_uart1 { @@ -846,6 +856,7 @@ &main_sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &ospi0 { @@ -864,6 +875,7 @@ flash@0 { cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + bootph-all; partitions { compatible = "fixed-partitions"; @@ -1003,6 +1015,7 @@ &wkup_gpio0 { &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ + bootph-all; }; &serdes_ln_ctrl { @@ -1012,6 +1025,7 @@ &serdes_ln_ctrl { , , , , , ; + bootph-all; }; &serdes_wiz3 { @@ -1051,6 +1065,7 @@ &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; ti,vbus-divider; + bootph-all; }; &usb0 { @@ -1058,6 +1073,7 @@ &usb0 { maximum-speed = "super-speed"; phys = <&serdes3_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &serdes2 { @@ -1074,6 +1090,7 @@ &usbss1 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss1_pins_default>; ti,vbus-divider; + bootph-all; }; &usb1 { @@ -1081,6 +1098,7 @@ &usb1 { maximum-speed = "super-speed"; phys = <&serdes2_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &mcu_cpsw { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 5ba947771b84..86bfc5e21eed 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -151,6 +151,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; + bootph-all; }; pmic_irq_pins_default: pmic-irq-default-pins { @@ -173,6 +174,7 @@ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ >; + bootph-all; }; mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { @@ -192,6 +194,7 @@ J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ5 */ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ7 */ >; + bootph-all; }; }; @@ -378,6 +381,7 @@ flash@0 { cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + bootph-all; partitions { compatible = "fixed-partitions"; @@ -440,6 +444,7 @@ &hbmc { flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; reg = <0x00 0x00 0x4000000>; + bootph-all; partitions { compatible = "fixed-partitions";