From patchwork Wed Jul 31 17:10:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manorit Chawdhry X-Patchwork-Id: 13748996 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E879DC3DA7F for ; Wed, 31 Jul 2024 17:14:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:CC:To:In-Reply-To:References :Message-ID:Content-Transfer-Encoding:Content-Type:MIME-Version:Subject:Date: From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=BIlnQn5XpzW1F2pdDBig/9KzLK0pGu4kWxjLX7yxamw=; b=5AVI+Htcfbm74j7Eh3OkF4aoTi 9Ss2XOPd/Jt6KAQUQHQzr3Cx3BxaaOcULFgTiTqn73bH2CS9zdBBDBamGIEkz6uffxVuSVJ47C/Ed yc5JMyJF77CHU1Oo/RySiTLpd+q7U5alkFGxPKenzO+Y5Qz/kye/83KGdEDKQGwGFMcj8Dwy9ysPK rqDhcnzDpb/vQNrQf1kh/t0Y6b8YylkNE5A6daeMSgmmSIWxnTQ3Z25a9kXhap+Ug1TEAm3fILCUA yIHerdd+K0grsqoT8XedJJaIUx+sB5IuyspHDiAJEzrlYOCHrvDet3O9TiXUNidn/1N519fwNx/am cYgUsMIQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sZCtq-00000001zSm-3zBp; Wed, 31 Jul 2024 17:14:06 +0000 Received: from fllv0015.ext.ti.com ([198.47.19.141]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sZCqr-00000001yP9-0Hd8 for linux-arm-kernel@lists.infradead.org; Wed, 31 Jul 2024 17:11:06 +0000 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 46VHAs9h117315; Wed, 31 Jul 2024 12:10:54 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1722445854; bh=BIlnQn5XpzW1F2pdDBig/9KzLK0pGu4kWxjLX7yxamw=; h=From:Date:Subject:References:In-Reply-To:To:CC; b=eUPuMPpUNhQDNa6rtxGk2SlkI0eVR06mcI6Odkb1hFRH+1GdG0HyQftCFboiyt4b3 NaH8TOG+QNKo9lO3KndY6kMSF9SGALwXa5JDzlBpPsXOcKWNkuLJpx+WFeQL3pwW6c z4CYjXLU6bXV7NVfK2EGw79NSmHEkbDZI5L8np0I= Received: from DFLE106.ent.ti.com (dfle106.ent.ti.com [10.64.6.27]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 46VHAs7l108969 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 31 Jul 2024 12:10:54 -0500 Received: from DFLE107.ent.ti.com (10.64.6.28) by DFLE106.ent.ti.com (10.64.6.27) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Wed, 31 Jul 2024 12:10:54 -0500 Received: from lelvsmtp5.itg.ti.com (10.180.75.250) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Wed, 31 Jul 2024 12:10:54 -0500 Received: from [127.0.1.1] (uda0497581.dhcp.ti.com [10.24.68.185]) by lelvsmtp5.itg.ti.com (8.15.2/8.15.2) with ESMTP id 46VHAVgS036362; Wed, 31 Jul 2024 12:10:51 -0500 From: Manorit Chawdhry Date: Wed, 31 Jul 2024 22:40:31 +0530 Subject: [PATCH v3 5/9] arm64: dts: ti: Move k3-j784s4-evm.dts to k3-j784s4-j742s2-evm-common.dtsi MIME-Version: 1.0 Message-ID: <20240731-b4-upstream-j742s2-v3-5-da7fe3aa9e90@ti.com> References: <20240731-b4-upstream-j742s2-v3-0-da7fe3aa9e90@ti.com> In-Reply-To: <20240731-b4-upstream-j742s2-v3-0-da7fe3aa9e90@ti.com> To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , Udit Kumar , Neha Malcom Francis , Aniket Limaye , Manorit Chawdhry X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=ed25519-sha256; t=1722445831; l=78544; i=m-chawdhry@ti.com; s=20231127; h=from:subject:message-id; bh=/cZKhFc/8QIDv/QQ5OBWgY0k+XOP7Ojr7ldGR5OeVFo=; b=IMZY9OC/3k9HZJUqUh83hJSfUgpSY7VgfJVCLoo6/MSbbDFtqz3jJ+kWFL2zvGaYzzGftni4C iQp+6LOJ+vbAE3VKRB/6S/qsBVFyFqbrT3lP9Hx5krZYySVXyiBcQg6 X-Developer-Key: i=m-chawdhry@ti.com; a=ed25519; pk=fsr6Tm39TvsTgfyfFQLk+nnqIz2sBA1PthfqqfiiYSs= X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240731_101101_371775_D479ACB0 X-CRM114-Status: GOOD ( 10.77 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org This is to introduce j742s2 support later, things from here will be moved to appropriate location. File k3-j784s4-evm.dts is not exactly removed as the name of DTS files shouldn't change mid refactor commits. Hence to keep the compatibility, after moving; k3-j784s4-evm.dts is including k3-j784s4-j742s2-evm-common.dtsi Signed-off-by: Manorit Chawdhry --- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 1471 +------------------ .../boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 1477 ++++++++++++++++++++ 2 files changed, 1478 insertions(+), 1470 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index ffa38f41679d..e3730b2bca92 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -5,1473 +5,4 @@ * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458 */ -/dts-v1/; - -#include -#include -#include "k3-j784s4.dtsi" - -/ { - compatible = "ti,j784s4-evm", "ti,j784s4"; - model = "Texas Instruments J784S4 EVM"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart8; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - i2c0 = &wkup_i2c0; - i2c3 = &main_i2c0; - ethernet0 = &mcu_cpsw_port1; - ethernet1 = &main_cpsw1_port1; - }; - - memory@80000000 { - device_type = "memory"; - bootph-all; - /* 32G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000007 0x80000000>; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; - no-map; - }; - - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0000000 0x00 0x100000>; - no-map; - }; - - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0100000 0x00 0xf00000>; - no-map; - }; - - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1000000 0x00 0x100000>; - no-map; - }; - - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa4000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa4100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa5000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa5100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa6000000 0x00 0x100000>; - no-map; - }; - - main_r5fss2_core0_memory_region: r5f-memory@a6100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa6100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa7000000 0x00 0x100000>; - no-map; - }; - - main_r5fss2_core1_memory_region: r5f-memory@a7100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa7100000 0x00 0xf00000>; - no-map; - }; - - c71_0_dma_memory_region: c71-dma-memory@a8000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa8000000 0x00 0x100000>; - no-map; - }; - - c71_0_memory_region: c71-memory@a8100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa8100000 0x00 0xf00000>; - no-map; - }; - - c71_1_dma_memory_region: c71-dma-memory@a9000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa9000000 0x00 0x100000>; - no-map; - }; - - c71_1_memory_region: c71-memory@a9100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa9100000 0x00 0xf00000>; - no-map; - }; - - c71_2_dma_memory_region: c71-dma-memory@aa000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xaa000000 0x00 0x100000>; - no-map; - }; - - c71_2_memory_region: c71-memory@aa100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xaa100000 0x00 0xf00000>; - no-map; - }; - - c71_3_dma_memory_region: c71-dma-memory@ab000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xab000000 0x00 0x100000>; - no-map; - }; - - c71_3_memory_region: c71-memory@ab100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xab100000 0x00 0xf00000>; - no-map; - }; - }; - - evm_12v0: regulator-evm12v0 { - /* main supply */ - compatible = "regulator-fixed"; - regulator-name = "evm_12v0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_3v3: regulator-vsys3v3 { - /* Output of LM5140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_5v0: regulator-vsys5v0 { - /* Output of LM5140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_mmc1: regulator-sd { - /* Output of TPS22918 */ - compatible = "regulator-fixed"; - regulator-name = "vdd_mmc1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - vin-supply = <&vsys_3v3>; - gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; - }; - - vdd_sd_dv: regulator-TLV71033 { - /* Output of TLV71033 */ - compatible = "regulator-gpio"; - regulator-name = "tlv71033"; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_sd_dv_pins_default>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - vin-supply = <&vsys_5v0>; - gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; - states = <1800000 0x0>, - <3300000 0x1>; - }; - - dp0_pwr_3v3: regulator-dp0-prw { - compatible = "regulator-fixed"; - regulator-name = "dp0-pwr"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - dp0: connector-dp0 { - compatible = "dp-connector"; - label = "DP0"; - type = "full-size"; - dp-pwr-supply = <&dp0_pwr_3v3>; - - port { - dp0_connector_in: endpoint { - remote-endpoint = <&dp0_out>; - }; - }; - }; - - transceiver0: can-phy0 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; - standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>; - }; - - transceiver1: can-phy1 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; - standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; - }; - - transceiver2: can-phy2 { - /* standby pin has been grounded by default */ - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - }; - - transceiver3: can-phy3 { - compatible = "ti,tcan1042"; - #phy-cells = <0>; - max-bitrate = <5000000>; - standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; - mux-states = <&mux1 1>; - }; - - mux1: mux-controller { - compatible = "gpio-mux"; - #mux-state-cells = <1>; - mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>; - idle-state = <1>; - }; - - codec_audio: sound { - compatible = "ti,j7200-cpb-audio"; - model = "j784s4-cpb"; - - ti,cpb-mcasp = <&mcasp0>; - ti,cpb-codec = <&pcm3168a_1>; - - clocks = <&k3_clks 265 0>, <&k3_clks 265 1>, - <&k3_clks 157 34>, <&k3_clks 157 63>; - clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000", - "cpb-codec-scki", "cpb-codec-scki-48000"; - }; -}; - -&wkup_gpio0 { - status = "okay"; -}; - -&main_pmx0 { - bootph-all; - main_cpsw2g_default_pins: main-cpsw2g-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */ - J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */ - J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */ - J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */ - J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */ - J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */ - J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */ - J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */ - J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */ - J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */ - J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */ - J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */ - >; - }; - - main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ - J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ - >; - }; - - main_uart8_pins_default: main-uart8-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ - J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ - J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ - J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ - J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ - >; - }; - - main_i2c5_pins_default: main-i2c5-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ - J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ - J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ - J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ - J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ - J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ - J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ - J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ - J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ - >; - }; - - vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ - >; - }; - - dp0_pins_default: dp0-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */ - >; - }; - - main_i2c4_pins_default: main-i2c4-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */ - J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */ - >; - }; - - main_mcan4_pins_default: main-mcan4-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */ - J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */ - >; - }; - - main_mcan16_pins_default: main-mcan16-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */ - J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */ - >; - }; - - main_usbss0_pins_default: main-usbss0-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ - >; - }; - - main_i2c3_pins_default: main-i2c3-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */ - J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */ - >; - }; - - main_mcasp0_pins_default: main-mcasp0-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */ - J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */ - J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */ - J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */ - >; - }; - - audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { - pinctrl-single,pins = < - J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ - >; - }; -}; - -&wkup_pmx2 { - bootph-all; - wkup_uart0_pins_default: wkup-uart0-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ - J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ - >; - }; - - wkup_i2c0_pins_default: wkup-i2c0-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ - J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ - >; - }; - - mcu_uart0_pins_default: mcu-uart0-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */ - J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */ - J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ - J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ - >; - }; - - mcu_cpsw_pins_default: mcu-cpsw-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ - J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ - J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ - J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ - J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ - J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ - J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ - J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ - J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ - >; - }; - - mcu_mdio_pins_default: mcu-mdio-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ - J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ - >; - }; - - mcu_adc0_pins_default: mcu-adc0-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */ - J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */ - J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */ - J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */ - J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */ - J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */ - J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */ - J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */ - >; - }; - - mcu_adc1_pins_default: mcu-adc1-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */ - J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */ - J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */ - J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */ - J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */ - J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */ - J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */ - J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ - >; - }; - - mcu_mcan0_pins_default: mcu-mcan0-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ - J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ - >; - }; - - mcu_mcan1_pins_default: mcu-mcan1-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ - J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ - >; - }; - - mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */ - >; - }; - - mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ - >; - }; -}; - -&wkup_pmx1 { - status = "okay"; - - pmic_irq_pins_default: pmic-irq-default-pins { - pinctrl-single,pins = < - /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) - >; - }; -}; - -&wkup_pmx0 { - bootph-all; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ - J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ - J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ - J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ - J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ - J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ - J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ - J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ - >; - }; -}; - -&wkup_pmx1 { - bootph-all; - mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */ - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */ - >; - }; - - mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { - bootph-all; - pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */ - J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */ - J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */ - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */ - J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */ - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */ - J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */ - J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */ - >; - }; -}; - -&wkup_uart0 { - /* Firmware usage */ - status = "reserved"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_uart0_pins_default>; -}; - -&wkup_i2c0 { - bootph-all; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <400000>; - - eeprom@50 { - /* CAV24C256WE-GT3 */ - compatible = "atmel,24c256"; - reg = <0x50>; - }; - - tps659413: pmic@48 { - compatible = "ti,tps6594-q1"; - reg = <0x48>; - system-power-controller; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins_default>; - interrupt-parent = <&wkup_gpio0>; - interrupts = <39 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - ti,primary-pmic; - buck12-supply = <&vsys_3v3>; - buck3-supply = <&vsys_3v3>; - buck4-supply = <&vsys_3v3>; - buck5-supply = <&vsys_3v3>; - ldo1-supply = <&vsys_3v3>; - ldo2-supply = <&vsys_3v3>; - ldo3-supply = <&vsys_3v3>; - ldo4-supply = <&vsys_3v3>; - - regulators { - bucka12: buck12 { - regulator-name = "vdd_ddr_1v1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - bucka3: buck3 { - regulator-name = "vdd_ram_0v85"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - }; - - bucka4: buck4 { - regulator-name = "vdd_io_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - bucka5: buck5 { - regulator-name = "vdd_mcu_0v85"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - }; - - ldoa1: ldo1 { - regulator-name = "vdd_mcuio_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldoa2: ldo2 { - regulator-name = "vdd_mcuio_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldoa3: ldo3 { - regulator-name = "vds_dll_0v8"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldoa4: ldo4 { - regulator-name = "vda_mcu_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - tps62873a: regulator@40 { - compatible = "ti,tps62873"; - reg = <0x40>; - bootph-pre-ram; - regulator-name = "VDD_CPU_AVS"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1330000>; - regulator-boot-on; - regulator-always-on; - }; - - tps62873b: regulator@43 { - compatible = "ti,tps62873"; - reg = <0x43>; - regulator-name = "VDD_CORE_0V8"; - regulator-min-microvolt = <760000>; - regulator-max-microvolt = <840000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -&mcu_uart0 { - bootph-all; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_uart0_pins_default>; -}; - -&main_uart8 { - bootph-all; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart8_pins_default>; -}; - -&ufs_wrapper { - status = "okay"; -}; - -&fss { - bootph-all; - status = "okay"; -}; - -&ospi0 { - bootph-all; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>; - - flash@0 { - bootph-all; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <8>; - spi-rx-bus-width = <8>; - spi-max-frequency = <25000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ospi.tiboot3"; - reg = <0x0 0x80000>; - }; - - partition@80000 { - label = "ospi.tispl"; - reg = <0x80000 0x200000>; - }; - - partition@280000 { - label = "ospi.u-boot"; - reg = <0x280000 0x400000>; - }; - - partition@680000 { - label = "ospi.env"; - reg = <0x680000 0x40000>; - }; - - partition@6c0000 { - label = "ospi.env.backup"; - reg = <0x6c0000 0x40000>; - }; - - partition@800000 { - label = "ospi.rootfs"; - reg = <0x800000 0x37c0000>; - }; - - partition@3fc0000 { - bootph-all; - label = "ospi.phypattern"; - reg = <0x3fc0000 0x40000>; - }; - }; - }; -}; - -&ospi1 { - bootph-all; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; - - flash@0 { - bootph-all; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - spi-max-frequency = <40000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <2>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "qspi.tiboot3"; - reg = <0x0 0x80000>; - }; - - partition@80000 { - label = "qspi.tispl"; - reg = <0x80000 0x200000>; - }; - - partition@280000 { - label = "qspi.u-boot"; - reg = <0x280000 0x400000>; - }; - - partition@680000 { - label = "qspi.env"; - reg = <0x680000 0x40000>; - }; - - partition@6c0000 { - label = "qspi.env.backup"; - reg = <0x6c0000 0x40000>; - }; - - partition@800000 { - label = "qspi.rootfs"; - reg = <0x800000 0x37c0000>; - }; - - partition@3fc0000 { - bootph-all; - label = "qspi.phypattern"; - reg = <0x3fc0000 0x40000>; - }; - }; - - }; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - - clock-frequency = <400000>; - - exp1: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ", - "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ", - "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", - "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", - "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; - - p12-hog { - /* P12 - AUDIO_MUX_SEL */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "AUDIO_MUX_SEL"; - }; - }; - - exp2: gpio@22 { - compatible = "ti,tca6424"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN", - "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0", - "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#", - "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ", - "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1", - "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", - "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", - "USER_INPUT1", "USER_LED1", "USER_LED2"; - - p13-hog { - /* P13 - CANUART_MUX_SEL0 */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "CANUART_MUX_SEL0"; - }; - - p15-hog { - /* P15 - CANUART_MUX1_SEL1 */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "CANUART_MUX1_SEL1"; - }; - }; -}; - -&main_i2c5 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c5_pins_default>; - clock-frequency = <400000>; - status = "okay"; - - exp5: gpio@20 { - compatible = "ti,tca6408"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0", - "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3", - "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2", - "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4"; - }; -}; - -&main_sdhci0 { - bootph-all; - /* eMMC */ - status = "okay"; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&main_sdhci1 { - bootph-all; - /* SD card */ - status = "okay"; - pinctrl-0 = <&main_mmc1_pins_default>; - pinctrl-names = "default"; - disable-wp; - vmmc-supply = <&vdd_mmc1>; - vqmmc-supply = <&vdd_sd_dv>; -}; - -&main_gpio0 { - status = "okay"; -}; - -&mcu_cpsw { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default>; -}; - -&davinci_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mdio_pins_default>; - - mcu_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - ti,min-output-impedance; - }; -}; - -&mcu_cpsw_port1 { - status = "okay"; - phy-mode = "rgmii-rxid"; - phy-handle = <&mcu_phy0>; -}; - -&main_cpsw1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_cpsw2g_default_pins>; - status = "okay"; -}; - -&main_cpsw1_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&main_cpsw2g_mdio_default_pins>; - status = "okay"; - - main_cpsw1_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - ti,min-output-impedance; - }; -}; - -&main_cpsw1_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&main_cpsw1_phy0>; - status = "okay"; -}; - -&mailbox0_cluster0 { - status = "okay"; - interrupts = <436>; - - mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster1 { - status = "okay"; - interrupts = <432>; - - mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster2 { - status = "okay"; - interrupts = <428>; - - mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster3 { - status = "okay"; - interrupts = <424>; - - mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster4 { - status = "okay"; - interrupts = <420>; - - mbox_c71_0: mbox-c71-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_c71_1: mbox-c71-1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster5 { - status = "okay"; - interrupts = <416>; - - mbox_c71_2: mbox-c71-2 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_c71_3: mbox-c71-3 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mcu_r5fss0_core0 { - status = "okay"; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; - memory-region = <&mcu_r5fss0_core0_dma_memory_region>, - <&mcu_r5fss0_core0_memory_region>; -}; - -&mcu_r5fss0_core1 { - status = "okay"; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; - memory-region = <&mcu_r5fss0_core1_dma_memory_region>, - <&mcu_r5fss0_core1_memory_region>; -}; - -&main_r5fss0_core0 { - status = "okay"; - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; - memory-region = <&main_r5fss0_core0_dma_memory_region>, - <&main_r5fss0_core0_memory_region>; -}; - -&main_r5fss0_core1 { - status = "okay"; - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; - memory-region = <&main_r5fss0_core1_dma_memory_region>, - <&main_r5fss0_core1_memory_region>; -}; - -&main_r5fss1_core0 { - status = "okay"; - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; - memory-region = <&main_r5fss1_core0_dma_memory_region>, - <&main_r5fss1_core0_memory_region>; -}; - -&main_r5fss1_core1 { - status = "okay"; - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; - memory-region = <&main_r5fss1_core1_dma_memory_region>, - <&main_r5fss1_core1_memory_region>; -}; - -&main_r5fss2_core0 { - status = "okay"; - mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; - memory-region = <&main_r5fss2_core0_dma_memory_region>, - <&main_r5fss2_core0_memory_region>; -}; - -&main_r5fss2_core1 { - status = "okay"; - mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; - memory-region = <&main_r5fss2_core1_dma_memory_region>, - <&main_r5fss2_core1_memory_region>; -}; - -&c71_0 { - status = "okay"; - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; - memory-region = <&c71_0_dma_memory_region>, - <&c71_0_memory_region>; -}; - -&c71_1 { - status = "okay"; - mboxes = <&mailbox0_cluster4 &mbox_c71_1>; - memory-region = <&c71_1_dma_memory_region>, - <&c71_1_memory_region>; -}; - -&c71_2 { - status = "okay"; - mboxes = <&mailbox0_cluster5 &mbox_c71_2>; - memory-region = <&c71_2_dma_memory_region>, - <&c71_2_memory_region>; -}; - -&c71_3 { - status = "okay"; - mboxes = <&mailbox0_cluster5 &mbox_c71_3>; - memory-region = <&c71_3_dma_memory_region>, - <&c71_3_memory_region>; -}; - -&tscadc0 { - pinctrl-0 = <&mcu_adc0_pins_default>; - pinctrl-names = "default"; - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; - -&tscadc1 { - pinctrl-0 = <&mcu_adc1_pins_default>; - pinctrl-names = "default"; - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; - -&serdes_refclk { - status = "okay"; - clock-frequency = <100000000>; -}; - -&dss { - status = "okay"; - assigned-clocks = <&k3_clks 218 2>, - <&k3_clks 218 5>, - <&k3_clks 218 14>, - <&k3_clks 218 18>; - assigned-clock-parents = <&k3_clks 218 3>, - <&k3_clks 218 7>, - <&k3_clks 218 16>, - <&k3_clks 218 22>; -}; - -&serdes0 { - status = "okay"; - - serdes0_pcie1_link: phy@0 { - reg = <0>; - cdns,num-lanes = <2>; - #phy-cells = <0>; - cdns,phy-type = ; - resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; - }; - - serdes0_usb_link: phy@3 { - reg = <3>; - cdns,num-lanes = <1>; - #phy-cells = <0>; - cdns,phy-type = ; - resets = <&serdes_wiz0 4>; - }; -}; - -&serdes_wiz0 { - status = "okay"; -}; - -&usb_serdes_mux { - idle-states = <0>; /* USB0 to SERDES lane 3 */ -}; - -&usbss0 { - status = "okay"; - pinctrl-0 = <&main_usbss0_pins_default>; - pinctrl-names = "default"; - ti,vbus-divider; -}; - -&usb0 { - dr_mode = "otg"; - maximum-speed = "super-speed"; - phys = <&serdes0_usb_link>; - phy-names = "cdns3,usb3-phy"; -}; - -&serdes_wiz4 { - status = "okay"; -}; - -&serdes4 { - status = "okay"; - serdes4_dp_link: phy@0 { - reg = <0>; - cdns,num-lanes = <4>; - #phy-cells = <0>; - cdns,phy-type = ; - resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, - <&serdes_wiz4 3>, <&serdes_wiz4 4>; - }; -}; - -&mhdp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp0_pins_default>; - phys = <&serdes4_dp_link>; - phy-names = "dpphy"; -}; - -&dss_ports { - /* DP */ - port { - dpi0_out: endpoint { - remote-endpoint = <&dp0_in>; - }; - }; -}; - -&main_i2c4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c4_pins_default>; - clock-frequency = <400000>; - - exp4: gpio@20 { - compatible = "ti,tca6408"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&dp0_ports { - port@0 { - reg = <0>; - - dp0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@4 { - reg = <4>; - - dp0_out: endpoint { - remote-endpoint = <&dp0_connector_in>; - }; - }; -}; - -&mcu_mcan0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan0_pins_default>; - phys = <&transceiver0>; -}; - -&mcu_mcan1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mcan1_pins_default>; - phys = <&transceiver1>; -}; - -&main_mcan16 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan16_pins_default>; - phys = <&transceiver2>; -}; - -&main_mcan4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mcan4_pins_default>; - phys = <&transceiver3>; -}; - -&pcie1_rc { - status = "okay"; - num-lanes = <2>; - reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; - phys = <&serdes0_pcie1_link>; - phy-names = "pcie-phy"; -}; - -&serdes1 { - status = "okay"; - - serdes1_pcie0_link: phy@0 { - reg = <0>; - cdns,num-lanes = <2>; - #phy-cells = <0>; - cdns,phy-type = ; - resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; - }; -}; - -&serdes_wiz1 { - status = "okay"; -}; - -&pcie0_rc { - status = "okay"; - reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; - phys = <&serdes1_pcie0_link>; - phy-names = "pcie-phy"; -}; - -&k3_clks { - /* Confiure AUDIO_EXT_REFCLK1 pin as output */ - pinctrl-names = "default"; - pinctrl-0 = <&audio_ext_refclk1_pins_default>; -}; - -&main_i2c3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c3_pins_default>; - clock-frequency = <400000>; - - exp3: gpio@20 { - compatible = "ti,tca6408"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - pcm3168a_1: audio-codec@44 { - compatible = "ti,pcm3168a"; - reg = <0x44>; - #sound-dai-cells = <1>; - reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; - clocks = <&audio_refclk1>; - clock-names = "scki"; - VDD1-supply = <&vsys_3v3>; - VDD2-supply = <&vsys_3v3>; - VCCAD1-supply = <&vsys_5v0>; - VCCAD2-supply = <&vsys_5v0>; - VCCDA1-supply = <&vsys_5v0>; - VCCDA2-supply = <&vsys_5v0>; - }; -}; - -&mcasp0 { - status = "okay"; - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mcasp0_pins_default>; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - auxclk-fs-ratio = <256>; - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 0 1 - 2 0 0 0 - 0 0 0 0 - 0 0 0 0 - >; -}; +#include "k3-j784s4-j742s2-evm-common.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi new file mode 100644 index 000000000000..ffa38f41679d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi @@ -0,0 +1,1477 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ + * + * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458 + */ + +/dts-v1/; + +#include +#include +#include "k3-j784s4.dtsi" + +/ { + compatible = "ti,j784s4-evm", "ti,j784s4"; + model = "Texas Instruments J784S4 EVM"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart8; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + i2c0 = &wkup_i2c0; + i2c3 = &main_i2c0; + ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw1_port1; + }; + + memory@80000000 { + device_type = "memory"; + bootph-all; + /* 32G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000007 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a9000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a9100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9100000 0x00 0xf00000>; + no-map; + }; + + c71_2_dma_memory_region: c71-dma-memory@aa000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa000000 0x00 0x100000>; + no-map; + }; + + c71_2_memory_region: c71-memory@aa100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa100000 0x00 0xf00000>; + no-map; + }; + + c71_3_dma_memory_region: c71-dma-memory@ab000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab000000 0x00 0x100000>; + no-map; + }; + + c71_3_memory_region: c71-memory@ab100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab100000 0x00 0xf00000>; + no-map; + }; + }; + + evm_12v0: regulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: regulator-vsys3v3 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: regulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-sd { + /* Output of TPS22918 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-TLV71033 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + dp0_pwr_3v3: regulator-dp0-prw { + compatible = "regulator-fixed"; + regulator-name = "dp0-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + dp0: connector-dp0 { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp0_pwr_3v3>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + transceiver0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy2 { + /* standby pin has been grounded by default */ + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>; + mux-states = <&mux1 1>; + }; + + mux1: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>; + idle-state = <1>; + }; + + codec_audio: sound { + compatible = "ti,j7200-cpb-audio"; + model = "j784s4-cpb"; + + ti,cpb-mcasp = <&mcasp0>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 265 0>, <&k3_clks 265 1>, + <&k3_clks 157 34>, <&k3_clks 157 63>; + clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000", + "cpb-codec-scki", "cpb-codec-scki-48000"; + }; +}; + +&wkup_gpio0 { + status = "okay"; +}; + +&main_pmx0 { + bootph-all; + main_cpsw2g_default_pins: main-cpsw2g-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */ + J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */ + J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */ + J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */ + J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */ + J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */ + J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */ + J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */ + J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */ + J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */ + J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ + J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + + main_uart8_pins_default: main-uart8-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ + J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ + J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ + J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ + J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ + >; + }; + + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ + J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ + J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ + J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ + J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ + J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ + J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ + J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ + J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ + >; + }; + + dp0_pins_default: dp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */ + J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */ + >; + }; + + main_mcan4_pins_default: main-mcan4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */ + J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */ + >; + }; + + main_usbss0_pins_default: main-usbss0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ + >; + }; + + main_i2c3_pins_default: main-i2c3-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */ + J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */ + >; + }; + + main_mcasp0_pins_default: main-mcasp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */ + J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */ + J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */ + J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */ + >; + }; + + audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ + >; + }; +}; + +&wkup_pmx2 { + bootph-all; + wkup_uart0_pins_default: wkup-uart0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + mcu_adc0_pins_default: mcu-adc0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */ + J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */ + J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */ + J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */ + J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */ + J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */ + J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */ + J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */ + >; + }; + + mcu_adc1_pins_default: mcu-adc1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */ + J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */ + J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */ + J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */ + J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */ + J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */ + J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */ + J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ + >; + }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */ + >; + }; + + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ + >; + }; +}; + +&wkup_pmx1 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + +&wkup_pmx0 { + bootph-all; + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ + >; + }; +}; + +&wkup_pmx1 { + bootph-all; + mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */ + >; + }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + bootph-all; + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */ + J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */ + J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */ + J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */ + >; + }; +}; + +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vds_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1330000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&mcu_uart0 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + +&main_uart8 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; +}; + +&ufs_wrapper { + status = "okay"; +}; + +&fss { + bootph-all; + status = "okay"; +}; + +&ospi0 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>; + + flash@0 { + bootph-all; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + bootph-all; + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&ospi1 { + bootph-all; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0 { + bootph-all; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "qspi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + bootph-all; + label = "qspi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + + }; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ", + "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ", + "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#", + "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", + "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ"; + + p12-hog { + /* P12 - AUDIO_MUX_SEL */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "AUDIO_MUX_SEL"; + }; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN", + "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0", + "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#", + "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ", + "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1", + "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ", + "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ", + "USER_INPUT1", "USER_LED1", "USER_LED2"; + + p13-hog { + /* P13 - CANUART_MUX_SEL0 */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX_SEL0"; + }; + + p15-hog { + /* P15 - CANUART_MUX1_SEL1 */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CANUART_MUX1_SEL1"; + }; + }; +}; + +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + exp5: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0", + "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3", + "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2", + "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4"; + }; +}; + +&main_sdhci0 { + bootph-all; + /* eMMC */ + status = "okay"; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci1 { + bootph-all; + /* SD card */ + status = "okay"; + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; +}; + +&main_gpio0 { + status = "okay"; +}; + +&mcu_cpsw { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + mcu_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + ti,min-output-impedance; + }; +}; + +&mcu_cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&mcu_phy0>; +}; + +&main_cpsw1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_default_pins>; + status = "okay"; +}; + +&main_cpsw1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_mdio_default_pins>; + status = "okay"; + + main_cpsw1_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + ti,min-output-impedance; + }; +}; + +&main_cpsw1_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&main_cpsw1_phy0>; + status = "okay"; +}; + +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + status = "okay"; + interrupts = <424>; + + mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "okay"; + interrupts = <416>; + + mbox_c71_2: mbox-c71-2 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_3: mbox-c71-3 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mcu_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&main_r5fss2_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; + memory-region = <&main_r5fss2_core0_dma_memory_region>, + <&main_r5fss2_core0_memory_region>; +}; + +&main_r5fss2_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; + memory-region = <&main_r5fss2_core1_dma_memory_region>, + <&main_r5fss2_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; + +&c71_2 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_2>; + memory-region = <&c71_2_dma_memory_region>, + <&c71_2_memory_region>; +}; + +&c71_3 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_3>; + memory-region = <&c71_3_dma_memory_region>, + <&c71_3_memory_region>; +}; + +&tscadc0 { + pinctrl-0 = <&mcu_adc0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + pinctrl-0 = <&mcu_adc1_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&serdes_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + +&dss { + status = "okay"; + assigned-clocks = <&k3_clks 218 2>, + <&k3_clks 218 5>, + <&k3_clks 218 14>, + <&k3_clks 218 18>; + assigned-clock-parents = <&k3_clks 218 3>, + <&k3_clks 218 7>, + <&k3_clks 218 16>, + <&k3_clks 218 22>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie1_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + }; + + serdes0_usb_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; + serdes4_dp_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, + <&serdes_wiz4 3>, <&serdes_wiz4 4>; + }; +}; + +&mhdp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; + phys = <&serdes4_dp_link>; + phy-names = "dpphy"; +}; + +&dss_ports { + /* DP */ + port { + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; +}; + +&main_i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&dp0_ports { + port@0 { + reg = <0>; + + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + + dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; +}; + +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver0>; +}; + +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver1>; +}; + +&main_mcan16 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver2>; +}; + +&main_mcan4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan4_pins_default>; + phys = <&transceiver3>; +}; + +&pcie1_rc { + status = "okay"; + num-lanes = <2>; + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie1_link>; + phy-names = "pcie-phy"; +}; + +&serdes1 { + status = "okay"; + + serdes1_pcie0_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&pcie0_rc { + status = "okay"; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie0_link>; + phy-names = "pcie-phy"; +}; + +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK1 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audio_ext_refclk1_pins_default>; +}; + +&main_i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + #sound-dai-cells = <1>; + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + clocks = <&audio_refclk1>; + clock-names = "scki"; + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; +}; + +&mcasp0 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp0_pins_default>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 1 + 2 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; +};