[v7,2/2] ARM: dts: aspeed: catalina: add Meta Catalina BMC

Message ID	20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Potin Lai <potin.lai.pt@gmail.com> Date: Mon, 05 Aug 2024 23:46:28 +0800 Subject: [PATCH v7 2/2] ARM: dts: aspeed: catalina: add Meta Catalina BMC MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com> References: <20240805-potin-catalina-dts-v7-0-286bfd2ab93b@gmail.com> In-Reply-To: <20240805-potin-catalina-dts-v7-0-286bfd2ab93b@gmail.com> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@codeconstruct.com.au>, Patrick Williams <patrick@stwcx.xyz> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, Potin Lai <potin.lai.pt@gmail.com>, Cosmo Chou <cosmo.chou@quantatw.com>, Potin Lai <potin.lai@quantatw.com>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Precedence: list Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	Add Meta(Facebook) Catalina BMC(AST2600) \| expand [v7,0/2] Add Meta(Facebook) Catalina BMC(AST2600) [v7,1/2] dt-bindings: arm: aspeed: add Meta Catalina board [v7,2/2] ARM: dts: aspeed: catalina: add Meta Catalina BMC

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index e51c6d203725..afdc9f78dd7f 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ + aspeed-bmc-facebook-catalina.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts new file mode 100644 index 000000000000..a62c30f2c0df --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -0,0 +1,979 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Catalina BMC"; + compatible = "facebook,catalina-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c30mux0ch0; + i2c49 = &i2c30mux0ch1; + i2c50 = &i2c30mux0ch2; + i2c51 = &i2c30mux0ch3; + i2c52 = &i2c30mux0ch4; + i2c53 = &i2c30mux0ch5; + i2c54 = &i2c30mux0ch6; + i2c55 = &i2c30mux0ch7; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c30mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c30mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c30mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c30mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + i2c30mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c30mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c30mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + // HDD FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + i2c30mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + }; + }; + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <500>; + }; + power-sensor@42 { + compatible = "ti,ina238"; + reg = <0x42>; + shunt-resistor = <500>; + }; + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <500>; + }; + }; + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + }; + power-sensor@43 { + compatible = "ti,ina238"; + reg = <0x43>; + }; + }; + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + power-monitor@42 { + compatible = "lltc,ltc4287"; + reg = <0x42>; + shunt-resistor-micro-ohms = <200>; + }; + power-monitor@43 { + compatible = "lltc,ltc4287"; + reg = <0x43>; + shunt-resistor-micro-ohms = <200>; + }; + }; + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // PDB FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + }; + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // PDB IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP IOEXP + io_expander6: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO FRU EEPROM + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + // Module 0 IOEXP + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // Module 1 IOEXP + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // HMC IOEXP + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // Module 0 EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + // BMC IOEXP on Module 0 + io_expander3: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + }; + + // SCM TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c12 { + status = "okay"; + + // Module 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + // Module 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Left CBC FRU EEPROM + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + + // Right CBC FRU EEPROM + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&io_expander0 { + gpio-line-names = + "FPGA_THERM_OVERT_L","FPGA_READY_BMC", + "HMC_BMC_DETECT","HMC_PGOOD", + "","BMC_SELF_PWR_CYCLE", + "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L", + "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L", + "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L", + "NCSI_CS1_SEL","SGPIO_EN_L", + "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L"; +}; + +&io_expander1 { + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC", + "","", + "","", + "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L", + "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","", + "","", + "","SEC_I2C_BUS_MUX_RESET_L"; +}; + +&io_expander2 { + gpio-line-names = + "HMC_PRSNT_L","HMC_READY", + "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL", + "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L", + "HMC_EROT_RST_L","GLOBAL_WP_HMC", + "FPGA_RST_L","USB2_HUB_RST", + "CPU_UART_MUX_SEL","", + "","","",""; +}; + +&io_expander3 { + gpio-line-names = + "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL", + "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL", + "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG", + "","","",""; +}; + +&io_expander4 { + gpio-line-names = + "stby_power_en_cpld","stby_power_gd_cpld","","", + "","","","", + "","","","", + "","","",""; +}; + +&io_expander5 { + gpio-line-names = + "JTAG_MUX_SEL","IOX_BMC_RESET","","", + "","","",""; +}; + +&io_expander6 { + gpio-line-names = + "OSFP_PHASE_ID0","OSFP_PHASE_ID1", + "OSFP_PHASE_ID2","OSFP_PHASE_ID3", + "","","","", + "OSFP_BOARD_ID0","OSFP_BOARD_ID1", + "OSFP_BOARD_ID2","PWRGD_P3V3_N1", + "PWRGD_P3V3_N2","","",""; +}; + +&io_expander7 { + gpio-line-names = + "RST_CX7_0","RST_CX7_1", + "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L","CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1", + "FNP_L_CX0","FNP_L_CX1", + "","","",""; +}; + +&io_expander8 { + gpio-line-names = + "SEC_RST_CX7_0","SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0","SEC_FNP_L_CX1", + "","","",""; +};

[v7,2/2] ARM: dts: aspeed: catalina: add Meta Catalina BMC

Commit Message

Patch