diff mbox series

[v5,5/5] firmware: arm_scmi: Add support to reset the debug metrics

Message ID 20240805131013.587016-6-sudeep.holla@arm.com (mailing list archive)
State New, archived
Headers show
Series Add per-transport SCMI communication debug statistics | expand

Commit Message

Sudeep Holla Aug. 5, 2024, 1:10 p.m. UTC 
From: Luke Parkin <luke.parkin@arm.com>

It is sometimes useful to reset all these SCMI communication debug
metrics especially when we are interested in analysing these metrics
during a particular workload or for a fixed time duration. Let us
add the capability to reset all these metrics as once so that they
can be counted during the period of interest.

Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index ade32a67ab63..ca910079d718 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -2864,6 +2864,24 @@  static const char * const dbg_counter_strs[] = {
 	"err_protocol",
 };
 
+static ssize_t reset_all_on_write(struct file *filp, const char __user *buf,
+				  size_t count, loff_t *ppos)
+{
+	struct scmi_debug_info *dbg = filp->private_data;
+
+	for (int i = 0; i < SCMI_DEBUG_COUNTERS_LAST; i++)
+		atomic_set(&dbg->counters[i], 0);
+
+	return count;
+}
+
+static const struct file_operations fops_reset_counts = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.llseek = no_llseek,
+	.write = reset_all_on_write,
+};
+
 static void scmi_debugfs_counters_setup(struct scmi_debug_info *dbg,
 					struct dentry *trans)
 {
@@ -2873,8 +2891,10 @@  static void scmi_debugfs_counters_setup(struct scmi_debug_info *dbg,
 	counters = debugfs_create_dir("counters", trans);
 
 	for (idx = 0; idx < SCMI_DEBUG_COUNTERS_LAST; idx++)
-		debugfs_create_atomic_t(dbg_counter_strs[idx], 0400, counters,
+		debugfs_create_atomic_t(dbg_counter_strs[idx], 0600, counters,
 					&dbg->counters[idx]);
+
+	debugfs_create_file("reset", 0200, counters, dbg, &fops_reset_counts);
 }
 
 static void scmi_debugfs_common_cleanup(void *d)