From patchwork Wed Aug 7 10:38:48 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 13756136 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 5B4F7C3DA7F for ; Wed, 7 Aug 2024 10:44:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=TRtEYHbs7sKTzP+9ZgwsHOlU1CMlDH7jmrCYismZTL0=; b=rdYQZVFwd8MBuz+EEQMvKfDz5t fj+Wob0Yg5PSvC826mzvmXuD46PHb0HaIkiSIGyyBeniK6f/+B+cYhtMOPCAzhJcUx2OovGzLJDxZ /8sAzTz13cRaX5//rJRlLF4/ThEBfYVI2WrYi7zUs073zVWyZS+aBaWRe5Qlr0LcRLUNc6XZVQcG5 EVuSAuxXKskPj3BNZDVcw9RSGkrjDK2aCjR3ck6vxwAMZK/WiFZpDtfiD3i3JQQJ4gy+NHu+j9Y/R hkNh56lJuIcMx/XgzNaiHsdKQO4eOYM+rhS5+CiZcdz3gqvoZv2bACgMS4RFSrZBXnfVVqugitvc6 28Uk+giQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1sbe9J-00000004kb3-2qCv; Wed, 07 Aug 2024 10:44:09 +0000 Received: from mail.fris.de ([116.203.77.234]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sbe8Y-00000004kNs-2mFj for linux-arm-kernel@lists.infradead.org; Wed, 07 Aug 2024 10:43:24 +0000 Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 4AC89BFB30; Wed, 7 Aug 2024 12:43:20 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=fris.de; s=dkim; t=1723027401; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=TRtEYHbs7sKTzP+9ZgwsHOlU1CMlDH7jmrCYismZTL0=; b=zJMu8s0X/aB6tt+4GXnMifEFclHeevhNC00bJBQun961W1znhS8nGEIQbJoTnrWRK+rpi2 pMkxk29Zqb7XsFqDMnqVagQoIW++1h1HMa1+otZJsxFYoOYQluowQhdBGyu9/S3Vsw4wpU Ibs/eEujBloZZLu2nlys47qbU46Cwv1/AuuUBR2v6jcYk8RHhISoe5WpABMOgpL8adPCd/ BnfxYopxALC4rjz9Yw6hYGUxWCGy6lkyiQ6++RPjTtNa0McIMcc0Q3HM1aKBxeChGHf6j6 9tGxFx69miIY9Qf21MHyxiDGFvFc0k7Zy0xeQY0vdhzQ63TdK8EUwU7eumYGbw== From: Frieder Schrempf To: Conor Dooley , devicetree@vger.kernel.org, imx@lists.linux.dev, Krzysztof Kozlowski , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring , Sascha Hauer , Shawn Guo Cc: Frieder Schrempf , Alexander Stein , Fabio Estevam , Gregor Herburger , Joao Paulo Goncalves , Parthiban Nallathambi , Peng Fan , Pengutronix Kernel Team Subject: [PATCH v2 3/3] arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier Date: Wed, 7 Aug 2024 12:38:48 +0200 Message-ID: <20240807104137.558741-4-frieder@fris.de> In-Reply-To: <20240807104137.558741-1-frieder@fris.de> References: <20240807104137.558741-1-frieder@fris.de> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240807_034323_027212_1502A072 X-CRM114-Status: GOOD ( 14.50 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org From: Frieder Schrempf This adds support for the Kontron Electronics i.MX8MP SMARC module (which uses the OSM-S i.MX8MP SoM) on the Kontron SMARC eval carrier. Signed-off-by: Frieder Schrempf --- Changes for v2: * Fix GPIO labels * Add support for TPM chip on SMARC module * Disable PWM in favor of GPIO5 on SMARC carrier * Enable LCDIF node to make HDMI work * Add support for GPIO expanders on SMARC carrier * Remove SPI flash as its removable and should be in an overlay * Add CAN regulators to fix transceiver enable --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../imx8mp-kontron-smarc-eval-carrier.dts | 258 ++++++++++++++++ .../dts/freescale/imx8mp-kontron-smarc.dtsi | 281 ++++++++++++++++++ 3 files changed, 540 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index e6f177e5fac26..250a7db037282 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -176,6 +176,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts new file mode 100644 index 0000000000000..c90cb12e91309 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include +#include "imx8mp-kontron-smarc.dtsi" + +/ { + model = "Kontron SMARC Eval Carrier with i.MX8MP"; + compatible = "kontron,imx8mp-smarc-eval-carrier", "kontron,imx8mp-smarc", + "kontron,imx8mp-osm-s", "fsl,imx8mp"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000 0>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <100>; + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + }; + + extcon_usbc: usbc { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_id>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "imx8mp-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Headphone Jack", "MICBIAS", + "IN1L", "Headphone Jack"; + simple-audio-card,widgets = + "Microphone", "Headphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + }; + + can0_en_reg: can0-regulator { + compatible = "regulator-fixed"; + regulator-name = "can0_en"; + gpio = <&expander_pm_out 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + can1_en_reg: can1-regulator { + compatible = "regulator-fixed"; + regulator-name = "can1_en"; + gpio = <&expander_pm_out 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + status = "okay"; +}; + +&ecspi2 { + status = "okay"; +}; + +&eqos { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&flexcan1 { + status = "okay"; + xceiver-supply = <&can0_en_reg>; +}; + +&flexcan2 { + status = "okay"; + xceiver-supply = <&can1_en_reg>; +}; + +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + expander_pm_out: tca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "EN_5V0_S0", "EN_3V3_S0", "EN_1V8_S0", + "EN_1V5_S0", "EN_12V0_PCIE", "EN_3V3_S5", + "CAN0_EN", "CAN1_EN"; + status = "okay"; + }; + + expander_pm_in: tca9554@24 { + compatible = "nxp,pca9554"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PG_5V0_3V3_S0", "PG_5V0_3V3_S5", "PG_1V8_S0", + "PG_1V5_S0", "PG_BKLT_5V", "PG_BKLT_12V"; + status = "okay"; + }; +}; + +&i2c2 { + status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; + clock-names = "mclk"; + AVDD-supply = <®_vdd_1v8>; + CPVDD-supply = <®_vdd_1v8>; + DBVDD-supply = <®_vdd_1v8>; + DCVDD-supply = <®_vdd_1v8>; + MICVDD-supply = <®_vdd_3v3>; + }; + + expander_audio: tca9554@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "I2C_SEL_CODEC_LOOPBACK", "FPAH_PRESENCE", + "CODEC_OPTION_SW_I2S_HDA", "LINE_IN_JD", + "LINE_OUT_JD", "HEADPHONES_JD", "MIC_JD"; + status = "okay"; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX8MP_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + uart-has-rtscts; + status = "okay"; +}; + +&usb_dwc3_0 { + adp-disable; + hnp-disable; + srp-disable; + + dr_mode = "otg"; + extcon = <&extcon_usbc>; + usb-role-switch; + status = "okay"; +}; + +&usb_dwc3_1 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usdhc2 { + vmmc-supply = <®_vdd_3v3>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi new file mode 100644 index 0000000000000..b06e33862be72 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Kontron Electronics GmbH + */ + +#include +#include "imx8mp-kontron-osm-s.dtsi" + +/ { + model = "Kontron SMARC i.MX8MP"; + compatible = "kontron,imx8mp-smarc", "kontron,imx8mp-osm-s", "fsl,imx8mp"; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ecspi1 { + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <18500000>; + }; +}; + +&eqos { /* Second ethernet (OSM-S ETH_B) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_rgmii>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id4f51.e91b"; + reg = <1>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fec { /* First ethernet (OSM-S ETH_A) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_rgmii>; + phy-connection-type = "rgmii-id"; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id4f51.e91b"; + reg = <1>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* + * Rename SoM signals according to SMARC module usage: + * GPIO_A_2 -> GPIO0 + * GPIO_A_3 -> GPIO1 + * GPIO_A_4 -> GPIO2 + * GPIO_A_5 -> GPIO3 + * USB_B_EN -> n.a. + * USB_B_ID -> n.a. + * USB_B_OC -> n.a. + */ +&gpio1 { + gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "", + "", "GPIO0", "GPIO1", "GPIO2", + "GPIO3", "", "USB_A_ID", "", + "USB_A_EN", "USB_A_OC","CAM_MCK", "", + "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2", + "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK", + "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1", + "ETH_B_RXD2", "ETH_B_RXD3"; +}; + +/* + * Rename SoM signals according to SMARC module usage: + * SDIO_A_CD -> SDIO_CD + * SDIO_A_CLK -> SDIO_CK + * SDIO_A_CMD -> SDIO_CMD + * SDIO_A_D0 -> SDIO_D0 + * SDIO_A_D1 -> SDIO_D1 + * SDIO_A_D2 -> SDIO_D2 + * SDIO_A_D3 -> SDIO_D3 + * SDIO_A_PWR_EN -> SDIO_PWR_EN + * SDIO_A_WP -> SDIO_WP + */ +&gpio2 { + gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", + "SDIO_CD", "SDIO_CK", "SDIO_CMD", "SDIO_D0", + "SDIO_D1", "SDIO_D2", "SDIO_D3", "SDIO_PWR_EN", + "SDIO_WP"; +}; + +/* + * Rename SoM signals according to SMARC module usage: + * PCIE_CLKREQ -> PCIE_A_CKREQ + * PCIE_A_PERST -> PCIE_A_RST + * SDIO_B_D5 -> n.a. + * SDIO_B_D6 -> n.a. + * SDIO_B_D7 -> n.a. + * SPI_A_WP -> n.a. + * SPI_A_HOLD -> n.a. + * UART_B_RTS -> SER2_RTS + * UART_B_CTS -> SER2_CTS + * SDIO_B_D0 -> GPIO8 + * SDIO_B_D1 -> GPIO9 + * SDIO_B_D2 -> GPIO10 + * SDIO_B_D3 -> GPIO11 + * SDIO_B_WP -> n.a. + * SDIO_B_D4 -> n.a. + * PCIE_SM_ALERT -> SMB_ALERT + * SDIO_B_CLK -> GPIO6 + * SDIO_B_CMD -> GPIO7 + * GPIO_B_0 -> LCD0_BKLT_EN + * GPIO_B_1 -> LCD1_BKLT_EN + * BOOT_SEL0 -> BOOT_SEL2 + * SDIO_B_CD -> n.a. + * SDIO_B_PWR_EN -> n.a. + * HDMI_CEC -> n.a. + * SDIO_B_PWR_EN -> n.a. + */ +&gpio3 { + pinctrl-0 = <&pinctrl_gpio3>, <&pinctrl_gpio3_smarc>; + gpio-line-names = "PCIE_WAKE", "PCIE_A_CKREQ", "PCIE_A_RST", "", + "", "", "", "", + "SER2_RTS", "SER2_CTS", "GPIO8", "GPIO9", + "GPIO10", "GPIO11", "", "", + "SMB_ALERT", "GPIO6", "GPIO7", "LCD0_BKLT_EN", + "LCD1_BKLT_EN", "", "BOOT_SEL2", "BOOT_SEL1", + "", "", "", "", + "", "HDMI_HPD"; +}; + +/* + * Rename SoM signals according to SMARC module usage: + * GPIO_B_5 -> n.a. + * GPIO_B_6 -> n.a. + * GPIO_B_7 -> n.a. + * GPIO_C_0 -> LED + * GPIO_B_3 -> ETH2_INT + * GPIO_B_4 -> USB_HUB_RST + * GPIO_B_2 -> ETH1_INT + * GPIO_A_6 -> GPIO4 + * CAN_A_TX -> CAN0_TX + * UART_A_CTS -> SER0_CTS + * UART_A_RTS -> SER0_RTS + * CAN_A_RX -> CAN0_RX + * CAN_B_TX -> CAN1_TX + * CAN_B_RX -> CAN1_RX + * GPIO_A_7 -> TEST + * I2S_A_DATA_IN -> I2S0_SDIN + * I2S_LRCLK -> I2S0_LRCK + */ +&gpio4 { + gpio-line-names = "", "", "", "LED", + "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1", + "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK", + "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3", + "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH2_INT", "USB_HUB_RST", + "ETH1_INT", "GPIO4", "CAN0_TX", "SER0_CTS", + "SER0_RTS", "CAN0_RX", "CAN1_TX", "CAN1_RX", + "TEST", "CARRIER_PWR_EN", "I2S0_SDIN", "I2S0_LRCK"; +}; + +/* + * Rename SoM signals according to SMARC module usage: + * I2S_BITCLK -> I2S0_CK + * I2S_A_DATA_OUT -> I2S0_SDOUT + * I2S_MCLK -> AUDIO_MCK + * PWM_2 -> GPIO5 + * PWM_1 -> LCD1_BKLT_PWM + * PWM_0 -> LCD0_BKLT_PWM + * SPI_A_SCK -> SPI0_CK + * SPI_A_SDO -> SPI0_DO + * SPI_A_SDI -> SPI0_DIN + * SPI_A_CS0 -> SPI0_CS0 + * SPI_B_SCK -> ESPI_CK + * SPI_B_SDO -> ESPI_IO_0 + * SPI_B_SDI -> ESPI_IO_1 + * SPI_B_CS0 -> ESPI_CS0 + * I2C_A_SCL -> I2C_PM_CK + * I2C_A_SDA -> I2C_PM_DAT + * I2C_B_SCL -> I2C_GP_CK + * I2C_B_SDA -> I2C_GP_DAT + * PCIE_SMCLK -> HDMI_CTRL_CK + * PCIE_SMDAT -> HDMI_CTRL_DAT + * I2C_CAM_SCL -> I2C_CAM1_CK + * I2C_CAM_SDA -> I2C_CAM1_DAT + * UART_A_RX -> SER0_RX + * UART_A_TX -> SER0_TX + * UART_C_RX -> SER3_RX + * UART_C_TX -> SER3_TX + * UART_CON_RX -> SER1_RX + * UART_CON_TX -> SER1_TX + * UART_B_RX -> SER2_RX + * UART_B_TX -> SER2_TX + */ +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5_smarc>; + gpio-line-names = "I2S0_CK", "I2S0_SDOUT", "AUDIO_MCK", "GPIO5", + "LCD1_BKLT_PWM", "LCD0_BKLT_PWM", "SPI0_CK", "SPI0_DO", + "SPI0_DIN", "SPI0_CS0", "ESPI_CK", "ESPI_IO_0", + "ESPI_IO_1", "ESPI_CS0", "I2C_PM_CK", "I2C_PM_DAT", + "I2C_GP_CK", "I2C_GP_DAT", "HDMI_CTRL_CK", "HDMI_CTRL_DAT", + "I2C_CAM1_CK", "I2C_CAM1_DAT", "SER0_RX", "SER0_TX", + "SER3_RX", "SER3_TX", "SER1_RX", "SER1_TX", + "SER2_RX", "SER2_TX"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb424,2514"; + reg = <1>; + reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; +}; + +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; +}; + +&iomuxc { + pinctrl_ethphy0: ethphy0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x46 + >; + }; + + pinctrl_ethphy1: ethphy1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x46 + >; + }; + + pinctrl_gpio3_smarc: gpio3smarcgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10 0x1d0 /* SMARC GPIO8 */ + MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11 0x1d0 /* SMARC GPIO9 */ + MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12 0x1d0 /* SMARC GPIO10 */ + MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13 0x1d0 /* SMARC GPIO11 */ + MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17 0x190 /* SMARC GPIO6 */ + MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18 0x1d0 /* SMARC GPIO7 */ + >; + }; + + pinctrl_gpio5_smarc: gpio5smarcgrp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1d0 /* SMARC GPIO5 */ + >; + }; +};