From patchwork Wed Aug 14 07:47:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manorit Chawdhry X-Patchwork-Id: 13762984 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3B6AAC52D7F for ; Wed, 14 Aug 2024 07:50:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:CC:To:In-Reply-To:References :Message-ID:Content-Transfer-Encoding:Content-Type:MIME-Version:Subject:Date: From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=+0Lk0dSZ5MBwwVzrzvptIekCQRx1TlMiS93FvVvlYck=; b=CpEOux38z+VOXlcC3GdTcdQcKd wXFZ1sINn/K8voCiYnWfSFg5w/xru+xFcthCutfTHTk9YJSrNRK3R27efIue2bw+nYP0wRU6FKp6w osww/6CftA4QWx4NEQVmQFJnPWdizksd/1O/Dzzh08370azJoMMDZS1ceOIvopulQfctWDn2/b1rf LtYtlgdfJgKgPPVR4QMATz/zwnAwwyTS/LBGW3AAKMgUD85Fs+DBKUjsb7S62BLLJBn+P4drUj7Ue Jqb7bTvHE6uf3Nsbja78NwJpXHxAXI7qk2SF17f7vggLKjIuWrGSUM+8ZpIotLMlRR7gBaPKIeTxO 8DQPYc6Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1se8lp-000000067bQ-2gJa; Wed, 14 Aug 2024 07:50:13 +0000 Received: from lelv0142.ext.ti.com ([198.47.23.249]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1se8jd-000000066qU-0Ran for linux-arm-kernel@lists.infradead.org; Wed, 14 Aug 2024 07:47:58 +0000 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 47E7ls5n106535; Wed, 14 Aug 2024 02:47:54 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1723621674; bh=+0Lk0dSZ5MBwwVzrzvptIekCQRx1TlMiS93FvVvlYck=; h=From:Date:Subject:References:In-Reply-To:To:CC; b=WQ5q/yFHWKqzDNLu6M84nLjBIJShbSMlpv/HQkp1RO2D+P+sFZKaoX/kQzW+yw3OM 5ENyPy04N1zpg1TStML6BbQhHDV0FmbcpSI3zaAxnJkk5F2vlwUuGSQMvNKx9oCGaJ ephRUAocGnQDeb1NArV0frCmWFUcJx8nqReYQSNw= Received: from DFLE104.ent.ti.com (dfle104.ent.ti.com [10.64.6.25]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 47E7lrr2018036 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 14 Aug 2024 02:47:53 -0500 Received: from DFLE113.ent.ti.com (10.64.6.34) by DFLE104.ent.ti.com (10.64.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Wed, 14 Aug 2024 02:47:53 -0500 Received: from lelvsmtp5.itg.ti.com (10.180.75.250) by DFLE113.ent.ti.com (10.64.6.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Wed, 14 Aug 2024 02:47:53 -0500 Received: from [127.0.1.1] (uda0497581.dhcp.ti.com [10.24.68.185]) by lelvsmtp5.itg.ti.com (8.15.2/8.15.2) with ESMTP id 47E7lT2I059812; Wed, 14 Aug 2024 02:47:49 -0500 From: Manorit Chawdhry Date: Wed, 14 Aug 2024 13:17:31 +0530 Subject: [PATCH v4 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties MIME-Version: 1.0 Message-ID: <20240814-b4-upstream-bootph-all-v4-4-f2b462000f25@ti.com> References: <20240814-b4-upstream-bootph-all-v4-0-f2b462000f25@ti.com> In-Reply-To: <20240814-b4-upstream-bootph-all-v4-0-f2b462000f25@ti.com> To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley CC: , , , Neha Malcom Francis , Aniket Limaye , Udit Kumar , Beleswar Padhi , Siddharth Vadapalli , Andrew Davis , Manorit Chawdhry X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=ed25519-sha256; t=1723621650; l=14362; i=m-chawdhry@ti.com; s=20231127; h=from:subject:message-id; bh=Kvq0Lxt7KlsIJNSSVChxjgfC1uEMTKi152AiPZa+D0w=; b=HARvdwkcBlX9s/+VUZQCu8pKXZhZ6uv0VGsqfST0aLF8XVkCSDU/43vmXH8uRJ+Esq3doqBqr 00Qy1BpQPDYDu9XzRKCHVFpvUuaee3ZH5yleMpwXCA1/oESYmy/TXVI X-Developer-Key: i=m-chawdhry@ti.com; a=ed25519; pk=fsr6Tm39TvsTgfyfFQLk+nnqIz2sBA1PthfqqfiiYSs= X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240814_004757_278771_E0CB409C X-CRM114-Status: GOOD ( 13.36 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Reviewed-by: Neha Malcom Francis Signed-off-by: Manorit Chawdhry --- .../arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 12 +++++++++++- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 18 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 5 +++++ 5 files changed, 56 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8230d53cd696..cc21ce51b2ce 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -193,6 +193,7 @@ J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */ J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -234,6 +235,7 @@ J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ >; + bootph-all; }; vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { @@ -247,6 +249,7 @@ main_usbss0_pins_default: main-usbss0-default-pins { J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; + bootph-all; }; main_usbss1_pins_default: main-usbss1-default-pins { @@ -272,6 +275,7 @@ main_i2c0_pins_default: main-i2c0-default-pins { J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; + bootph-all; }; main_i2c1_pins_default: main-i2c1-default-pins { @@ -342,6 +346,7 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ >; + bootph-all; }; mcu_uart0_pins_default: mcu-uart0-default-pins { @@ -351,6 +356,7 @@ J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */ J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-all; }; sw11_button_pins_default: sw11-button-default-pins { @@ -370,6 +376,7 @@ J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -427,6 +434,7 @@ wkup_gpio_pins_default: wkup-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */ >; + bootph-all; }; }; @@ -435,12 +443,14 @@ &wkup_uart0 { status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart0 { @@ -449,6 +459,7 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &main_uart1 { @@ -473,6 +484,7 @@ &wkup_gpio0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wkup_gpio_pins_default>; + bootph-all; }; &main_gpio0 { @@ -489,6 +501,7 @@ &main_sdhci0 { non-removable; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &main_sdhci1 { @@ -500,10 +513,12 @@ &main_sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &usb_serdes_mux { idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ + bootph-all; }; &serdes_ln_ctrl { @@ -513,6 +528,7 @@ &serdes_ln_ctrl { , , , , , ; + bootph-all; }; &serdes_wiz3 { @@ -533,6 +549,7 @@ serdes3_usb_link: phy@0 { &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; + bootph-all; ti,vbus-divider; }; @@ -541,6 +558,7 @@ &usb0 { maximum-speed = "super-speed"; phys = <&serdes3_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &usbss1 { @@ -613,6 +631,7 @@ partition@800000 { partition@3fe0000 { label = "qspi.phypattern"; reg = <0x3fe0000 0x20000>; + bootph-all; }; }; }; @@ -650,6 +669,7 @@ exp2: gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + bootph-all; p09-hog { /* P11 - MCASP/TRACE_MUX_S0 */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 0da785be80ff..af3d730154ac 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -226,6 +226,7 @@ secure_proxy_main: mailbox@32c00000 { <0x00 0x32800000 0x00 0x100000>; interrupt-names = "rx_011"; interrupts = ; + bootph-all; }; smmu0: iommu@36600000 { @@ -2853,6 +2854,7 @@ main_spi7: spi@2170000 { main_esm: esm@700000 { compatible = "ti,j721e-esm"; reg = <0x0 0x700000 0x0 0x1000>; + bootph-pre-ram; ti,esm-pins = <344>, <345>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 6b6ef6a30614..425a5dedaa74 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -21,16 +21,19 @@ dmsc: system-controller@44083000 { k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -61,6 +64,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; }; @@ -112,6 +116,7 @@ mcu_timer0: timer@40400000 { assigned-clocks = <&k3_clks 35 1>; assigned-clock-parents = <&k3_clks 35 2>; power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + bootph-pre-ram; ti,timer-pwm; /* Non-MPU Firmware usage */ status = "reserved"; @@ -362,6 +367,7 @@ hbmc_mux: mux-controller@47000004 { reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; mux-reg-masks = <0x0 0x2>; /* HBMC select */ + bootph-all; }; hbmc: hyperbus@47034000 { @@ -470,6 +476,7 @@ mcu_ringacc: ringacc@2b800000 { <0x0 0x2a500000 0x0 0x40000>, <0x0 0x28440000 0x0 0x40000>; reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; + bootph-all; ti,num-rings = <286>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ ti,sci = <&dmsc>; @@ -489,6 +496,7 @@ mcu_udmap: dma-controller@285c0000 { "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; + bootph-all; ti,sci = <&dmsc>; ti,sci-dev-id = <236>; @@ -509,6 +517,7 @@ secure_proxy_mcu: mailbox@2a480000 { reg = <0x0 0x2a480000 0x0 0x80000>, <0x0 0x2a380000 0x0 0x80000>, <0x0 0x2a400000 0x0 0x80000>; + bootph-pre-ram; /* * Marked Disabled: * Node is incomplete as it is meant for bootloaders and @@ -687,12 +696,13 @@ wkup_vtm0: temperature-sensor@42040000 { <0x00 0x43000300 0x00 0x10>; power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; + bootph-pre-ram; }; mcu_esm: esm@40800000 { compatible = "ti,j721e-esm"; reg = <0x00 0x40800000 0x00 0x1000>; - ti,esm-pins = <95>; bootph-pre-ram; + ti,esm-pins = <95>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 89fbfb21e5d3..2ce81eb84ac6 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -346,6 +346,7 @@ J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ >; + bootph-all; }; main_uart0_pins_default: main-uart0-default-pins { @@ -355,6 +356,7 @@ J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -390,12 +392,14 @@ main_usbss0_pins_default: main-usbss0-default-pins { J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; + bootph-all; }; main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; + bootph-all; }; main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { @@ -594,6 +598,7 @@ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ >; + bootph-all; }; vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { @@ -622,6 +627,7 @@ J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-all; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { @@ -629,6 +635,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -657,6 +664,7 @@ &wkup_uart0 { status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &wkup_i2c0 { @@ -821,6 +829,7 @@ &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart0 { @@ -829,6 +838,7 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &main_uart1 { @@ -846,6 +856,7 @@ &main_sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &ospi0 { @@ -908,6 +919,7 @@ partition@800000 { partition@3fc0000 { label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; + bootph-all; }; }; }; @@ -1003,6 +1015,7 @@ &wkup_gpio0 { &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ + bootph-all; }; &serdes_ln_ctrl { @@ -1012,6 +1025,7 @@ &serdes_ln_ctrl { , , , , , ; + bootph-all; }; &serdes_wiz3 { @@ -1050,6 +1064,7 @@ &mhdp { &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; + bootph-all; ti,vbus-divider; }; @@ -1058,6 +1073,7 @@ &usb0 { maximum-speed = "super-speed"; phys = <&serdes3_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &serdes2 { @@ -1073,6 +1089,7 @@ serdes2_usb_link: phy@1 { &usbss1 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss1_pins_default>; + bootph-all; ti,vbus-divider; }; @@ -1081,6 +1098,7 @@ &usb1 { maximum-speed = "super-speed"; phys = <&serdes2_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &mcu_cpsw { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 5ba947771b84..100cc7a59576 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -151,6 +151,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; + bootph-all; }; pmic_irq_pins_default: pmic-irq-default-pins { @@ -173,6 +174,7 @@ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ >; + bootph-all; }; mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { @@ -192,6 +194,7 @@ J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ5 */ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ7 */ >; + bootph-all; }; }; @@ -422,6 +425,7 @@ partition@800000 { partition@3fe0000 { label = "ospi.phypattern"; reg = <0x3fe0000 0x20000>; + bootph-all; }; }; }; @@ -440,6 +444,7 @@ &hbmc { flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; reg = <0x00 0x00 0x4000000>; + bootph-all; partitions { compatible = "fixed-partitions";