From patchwork Wed Aug 14 06:13:15 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manikandan Muralidharan X-Patchwork-Id: 13762861 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7646CC3DA4A for ; Wed, 14 Aug 2024 06:17:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=x5uokFwLME6wfP1byHXtnQMyKuOAYTmKbGuqx0eohIA=; b=HZR9Vi6VCtN8a9v1syfr9khjQV wswQ0E8KCCTR5+7U8Mg081ACQwwqdZebwMIMqwO6nhG0yIVpD0v+xgC737FeiFX2fPaNULNhmDfNf rr07uoWdSek9QSZmF9Yp1199vBFLVJDoFBH35cf6QCwbVrhoFZbqb2xq+xioRLIpogEvlaVHp16tW XD2iskKXg3TII4AMqPxEsc3eryobxAW2MEti9//PaWLG2xDKc9jsImzRXcNcJ1rLbr78YbN+f1/YI szL17fkk/GAoseVa3F7PEL0p4PwbXwKJcwuNCPKAOe6AHG2NpjCPk18DGXYyaHCQW7YNBpe8uN130 /z2dMCLQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1se7K5-00000005u9M-3Dpy; Wed, 14 Aug 2024 06:17:29 +0000 Received: from esa.microchip.iphmx.com ([68.232.154.123]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1se7H3-00000005tNC-47Nm for linux-arm-kernel@lists.infradead.org; Wed, 14 Aug 2024 06:14:28 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1723616062; x=1755152062; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=lfJozrnUYIBqrekvOlf+TdBTrL5hG9ncnuGG3CNVjhg=; b=u46wj+I7AdvahV4Wc/MvvD2DgS/wCRIlkezJEf+K/LjW+v3Rh7ERbob2 sE6EevZdJd5lshhmNUb9/7oo7aTMmG+6ytV8lFl6aSlpqtRKXdnjgXBWn e61nLnfm6VqEdNzDORsUPf6YgUMNJJM1F1TxbPC2YdH62lcmw40Z5QV09 uvBKZ6/2Fr6DRVV7OKZnsCeCQrVgYP3Dp3Em0zfd/TgdokOQjACC043Kr dCxTtTjJQBf2E0yTNlx0u1FpmmNNE0dkUpp6Z1iqi/Jf+Ewc/s6LT1f5+ TwvlxJUYMP6FBsAy6UvloEZ4BmK9S1/NzwIvlysX3tmqVQ4L7J5v1i+sP Q==; X-CSE-ConnectionGUID: VtAuaGbISWaM3hnbWks63w== X-CSE-MsgGUID: rf8RwR5QRO6rZr6182mHXA== X-IronPort-AV: E=Sophos;i="6.09,288,1716274800"; d="scan'208";a="31140262" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa2.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 13 Aug 2024 23:14:20 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Tue, 13 Aug 2024 23:13:44 -0700 Received: from che-lt-i67131.microchip.com (10.10.85.11) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Tue, 13 Aug 2024 23:13:40 -0700 From: Manikandan Muralidharan To: , , , , , , , , , , CC: Subject: [PATCH v4 4/4] dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema Date: Wed, 14 Aug 2024 11:43:15 +0530 Message-ID: <20240814061315.112564-5-manikandan.m@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240814061315.112564-1-manikandan.m@microchip.com> References: <20240814061315.112564-1-manikandan.m@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240813_231422_146110_8E927C8A X-CRM114-Status: GOOD ( 25.94 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Convert Atmel PIO3 pinctrl binding document to DT schema format json-schema. Signed-off-by: Manikandan Muralidharan Acked-by: Linus Walleij Reviewed-by: Rob Herring (Arm) --- changes in v4: - Add Reviewed-by tag changes in v3: - Remove quotes in $ref - modify the gpio regex - Remove pinmux pinctrl subnode regex and modify it since they do not follow a particular order or pattern, Adding 'type:object' with this '^[a-z0-9-_]+$' regex does throw DTC_CHK errors for other pio3 pinctrl properties changes in v2: - Fix bot errors by fixing issues in 4/5 - remove qoutes from $ref --- .../bindings/pinctrl/atmel,at91-pinctrl.txt | 178 ----------------- .../pinctrl/atmel,at91rm9200-pinctrl.yaml | 184 ++++++++++++++++++ 2 files changed, 184 insertions(+), 178 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt deleted file mode 100644 index 0aa1a53012d6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ /dev/null @@ -1,178 +0,0 @@ -* Atmel AT91 Pinmux Controller - -The AT91 Pinmux Controller, enables the IC -to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are up to -8 muxing options (called periph modes). Since different modules require -different PAD settings (like pull up, keeper, etc) the controller controls -also the PAD settings parameters. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Atmel AT91 pin configuration node is a node of a group of pins which can be -used for a specific device or function. This node represents both mux and config -of the pins in that group. The 'pins' selects the function mode(also named pin -mode) this pin can work on and the 'config' configures various pad settings -such as pull-up, multi drive, etc. - -Required properties for iomux controller: -- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" - or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" - or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl" -- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be - configured in this periph mode. All the periph and bank need to be describe. - -How to create such array: - -Each column will represent the possible peripheral of the pinctrl -Each line will represent a pio bank - -Take an example on the 9260 -Peripheral: 2 ( A and B) -Bank: 3 (A, B and C) -=> - - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - -For each peripheral/bank we will describe in a u32 if a pin can be -configured in it by putting 1 to the pin bit (1 << pin) - -Let's take the pioA on peripheral B -From the datasheet Table 10-2. -Peripheral B -PA0 MCDB0 -PA1 MCCDB -PA2 -PA3 MCDB3 -PA4 MCDB2 -PA5 MCDB1 -PA6 -PA7 -PA8 -PA9 -PA10 ETX2 -PA11 ETX3 -PA12 -PA13 -PA14 -PA15 -PA16 -PA17 -PA18 -PA19 -PA20 -PA21 -PA22 ETXER -PA23 ETX2 -PA24 ETX3 -PA25 ERX2 -PA26 ERX3 -PA27 ERXCK -PA28 ECRS -PA29 ECOL -PA30 RXD4 -PA31 TXD4 - -=> 0xffc00c3b - -Required properties for pin configuration node: -- atmel,pins: 4 integers array, represents a group of pins mux and config - setting. The format is atmel,pins = . - The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... - PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... - -Bits used for CONFIG: -PULL_UP (1 << 0): indicate this pin needs a pull up. -MULTIDRIVE (1 << 1): indicate this pin needs to be configured as multi-drive. - Multi-drive is equivalent to open-drain type output. -DEGLITCH (1 << 2): indicate this pin needs deglitch. -PULL_DOWN (1 << 3): indicate this pin needs a pull down. -DIS_SCHMIT (1 << 4): indicate this pin needs to the disable schmitt trigger. -DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the - following values: - 00 - No change (reset state value kept) - 01 - Low - 10 - Medium - 11 - High -OUTPUT (1 << 7): indicate this pin need to be configured as an output. -OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) -SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable -DEBOUNCE (1 << 16): indicate this pin needs debounce. -DEBOUNCE_VAL (0x3fff << 17): debounce value. - -NOTE: -Some requirements for using atmel,at91rm9200-pinctrl binding: -1. We have pin function node defined under at91 controller node to represent - what pinmux functions this SoC supports. -2. The driver can use the function node's name and pin configuration node's - name describe the pin function and group hierarchy. - For example, Linux at91 pinctrl driver takes the function node's name - as the function name and pin configuration node's name as group name to - create the map table. -3. Each pin configuration node should have a phandle, devices can set pins - configurations by referring to the phandle of that pin configuration node. -4. The gpio controller must be describe in the pinctrl simple-bus. - -For each bank the required properties are: -- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or - "microchip,sam9x60-gpio" - or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio" -- reg: physical base address and length of the controller's registers -- interrupts: interrupt outputs from the controller -- interrupt-controller: marks the device node as an interrupt controller -- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt - for more details. -- gpio-controller -- #gpio-cells: should be 2; the first cell is the GPIO number and the second - cell specifies GPIO flags as defined in . -- clocks: bank clock - -Examples: - -pinctrl@fffff400 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; - reg = <0xfffff400 0x600>; - - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; - }; - - atmel,mux-mask = < - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - >; - - /* shared pinctrl settings */ - dbgu { - pinctrl_dbgu: dbgu-0 { - atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph A with pullup */ - }; - }; -}; - -dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dbgu>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml new file mode 100644 index 000000000000..1bb386b42039 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/atmel,at91rm9200-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIO3 Pinmux Controller + +maintainers: + - Manikandan Muralidharan + +description: + The AT91 Pinmux Controller, enables the IC to share one PAD to several + functional blocks. The sharing is done by multiplexing the PAD input/output + signals. For each PAD there are up to 8 muxing options (called periph modes). + Since different modules require different PAD settings (like pull up, keeper, + etc) the controller controls also the PAD settings parameters. + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91rm9200-pinctrl + - atmel,at91sam9x5-pinctrl + - atmel,sama5d3-pinctrl + - microchip,sam9x60-pinctrl + - const: simple-mfd + - items: + - enum: + - microchip,sam9x7-pinctrl + - const: microchip,sam9x60-pinctrl + - const: simple-mfd + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + atmel,mux-mask: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Array of mask (periph per bank) to describe if a pin can be + configured in this periph mode. All the periph and bank need to + be described. + + #How to create such array: + + Each column will represent the possible peripheral of the pinctrl + Each line will represent a pio bank + + #Example: + + In at91sam9260.dtsi, + Peripheral: 2 ( A and B) + Bank: 3 (A, B and C) + + # A B + 0xffffffff 0xffc00c3b # pioA + 0xffffffff 0x7fff3ccf # pioB + 0xffffffff 0x007fffff # pioC + + For each peripheral/bank we will describe in a u32 if a pin can be + configured in it by putting 1 to the pin bit (1 << pin) + + Let's take the pioA on peripheral B whose value is 0xffc00c3b + From the datasheet Table 10-2. + Peripheral B + PA0 MCDB0 + PA1 MCCDB + PA2 + PA3 MCDB3 + PA4 MCDB2 + PA5 MCDB1 + PA6 + PA7 + PA8 + PA9 + PA10 ETX2 + PA11 ETX3 + PA12 + PA13 + PA14 + PA15 + PA16 + PA17 + PA18 + PA19 + PA20 + PA21 + PA22 ETXER + PA23 ETX2 + PA24 ETX3 + PA25 ERX2 + PA26 ERX3 + PA27 ERXCK + PA28 ECRS + PA29 ECOL + PA30 RXD4 + PA31 TXD4 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - atmel,mux-mask + +patternProperties: + 'gpio@[0-9a-f]+$': + $ref: /schemas/gpio/atmel,at91rm9200-gpio.yaml + unevaluatedProperties: false + +additionalProperties: + type: object + additionalProperties: + type: object + additionalProperties: false + + properties: + atmel,pins: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Each entry consists of 4 integers and represents the pins + mux and config setting.The format is + atmel,pins = . + Supported pin number and mux varies for different SoCs, and + are defined in . + items: + items: + - description: + Pin bank + - description: + Pin bank index + - description: + Peripheral function + - description: + Pad configuration + +examples: + - | + #include + #include + #include + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + ; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + }; +...