From patchwork Fri Aug 16 13:20:55 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christian Bruel X-Patchwork-Id: 13766299 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 869A8C3DA4A for ; Fri, 16 Aug 2024 13:24:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Type: Content-Transfer-Encoding:MIME-Version:References:In-Reply-To:Message-ID:Date :Subject:CC:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=WDL+vDz4WlrjlrBOyROWdtPBiPUL8eRaS7xnJCEv2hU=; b=RkMzi2xmGz0WHaBMuekjET5Dsc dic03BWT0rJszLPlFW76g2DKe0fzWCIc2anx5URZZou6zKQFxRiEYrlJa970MDFnif2THud0fEl/f Kq5MOAA2dqgglkT3Pn/CWcJKerS5NxHUI0uWvQB3DAcBJLrOfaRV+cS2RnEqCZ0u6hLFPKmOJsbtE iCGRChxQV0O6aKQu6FEOA0YU0WIdaenIyIcz5wSsQ2Ag5A4cP0QdGQFbtNijbD4Ncjb+5yqDqznFb CVAZ5/SQpC/lFdFKR7eWMfjfpNflsHimPvY3gm9uEWVRO41fsb+Ez8KAtMw4YYwl5ILSqqf6DoAi9 o7v2Bi5Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1seww1-0000000D1ws-2R3C; Fri, 16 Aug 2024 13:24:05 +0000 Received: from mx08-00178001.pphosted.com ([91.207.212.93] helo=mx07-00178001.pphosted.com) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1sewuc-0000000D1Rj-3tpR; Fri, 16 Aug 2024 13:22:41 +0000 Received: from pps.filterd (m0046660.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 47GB3ei0007643; Fri, 16 Aug 2024 15:22:30 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=selector1; bh= WDL+vDz4WlrjlrBOyROWdtPBiPUL8eRaS7xnJCEv2hU=; b=XqqXWy6nZ3CIKsfU Nhms8zdRNKpe/lX1vBOmJCdKgwgarLSYiOx9bqMYNX4RN2gidd/jC/0n//L5CmEQ FIS9frHtLQhWLAv7wpdbPpDCvEY/1F4/86yuRs7+X/p4F/SqbaHE24+tN6hRHH0z S/vXdnpc4Ha533ccCaPh0FRZ+tLhqJzrnXnnPV6j8dj6DeX3SoZB8FKBrxkEddo7 wzvW78Nh9/IZG019hXkKSnZyd0KmXfttslhdQEyltTFzadEVuOS8CK3ulWzMxYbw XO4C/EUib5x1NoR8it8EoLxZdwLPstN834JtD2rR7cWg8ApyGGvuGEU2kv6Hn8yj d6jlwQ== Received: from beta.dmz-ap.st.com (beta.dmz-ap.st.com [138.198.100.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 4121pns98j-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 16 Aug 2024 15:22:30 +0200 (MEST) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 9AEF540045; Fri, 16 Aug 2024 15:22:26 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node3.st.com [10.75.129.71]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id E79F025B76F; Fri, 16 Aug 2024 15:21:37 +0200 (CEST) Received: from localhost (10.129.178.198) by SHFDAG1NODE3.st.com (10.75.129.71) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.37; Fri, 16 Aug 2024 15:21:37 +0200 From: Christian Bruel To: , , , , , , , CC: , , , , , , Christian Bruel Subject: [PATCH v2 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY. Date: Fri, 16 Aug 2024 15:20:55 +0200 Message-ID: <20240816132058.920870-4-christian.bruel@foss.st.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240816132058.920870-1-christian.bruel@foss.st.com> References: <20240816132058.920870-1-christian.bruel@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.129.178.198] X-ClientProxiedBy: EQNCAS1NODE4.st.com (10.75.129.82) To SHFDAG1NODE3.st.com (10.75.129.71) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-08-16_05,2024-08-16_01,2024-05-17_01 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240816_062239_329344_D382E07E X-CRM114-Status: GOOD ( 27.57 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Addition of the COMBOPHY driver found on STM32MP25 platforms This single lane PHY is shared (exclusive) between the USB3 and PCIE controllers. Supports 5Gbit/s for PCIE gen2 or 2.5Gbit/s for PCIE gen1. Supports wakeup-source capability to wakeup system using remote-wakeup capable USB device Signed-off-by: Christian Bruel --- drivers/phy/st/Kconfig | 11 + drivers/phy/st/Makefile | 1 + drivers/phy/st/phy-stm32-combophy.c | 607 ++++++++++++++++++++++++++++ 3 files changed, 619 insertions(+) create mode 100644 drivers/phy/st/phy-stm32-combophy.c diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig index 3fc3d0781fb8..304614b6dabf 100644 --- a/drivers/phy/st/Kconfig +++ b/drivers/phy/st/Kconfig @@ -33,6 +33,17 @@ config PHY_STIH407_USB Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. +config PHY_STM32_COMBOPHY + tristate "STMicroelectronics COMBOPHY driver for STM32MP25" + depends on ARCH_STM32 || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the COMBOPHY device used by USB3 or PCIe + controllers on STMicroelectronics STM32MP25 SoC. + This driver controls the COMBOPHY block to generate the PCIe 100Mhz + reference clock from either the external clock generator or HSE + internal SoC clock source. + config PHY_STM32_USBPHYC tristate "STMicroelectronics STM32 USB HS PHY Controller driver" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile index c862dd937b64..cb80e954ea9f 100644 --- a/drivers/phy/st/Makefile +++ b/drivers/phy/st/Makefile @@ -3,4 +3,5 @@ obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STM32_COMBOPHY) += phy-stm32-combophy.o obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o diff --git a/drivers/phy/st/phy-stm32-combophy.c b/drivers/phy/st/phy-stm32-combophy.c new file mode 100644 index 000000000000..7cd4193b0277 --- /dev/null +++ b/drivers/phy/st/phy-stm32-combophy.c @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * STMicroelectronics COMBOPHY STM32MP25 Controller driver. + * + * Copyright (C) 2024 STMicroelectronics + * Author: Christian Bruel + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SYSCFG_COMBOPHY_CR1 0x4C00 +#define SYSCFG_COMBOPHY_CR2 0x4C04 +#define SYSCFG_COMBOPHY_CR4 0x4C0C +#define SYSCFG_COMBOPHY_CR5 0x4C10 +#define SYSCFG_COMBOPHY_SR 0x4C14 +#define SYSCFG_PCIEPRGCR 0x6080 + +/* SYSCFG PCIEPRGCR */ +#define STM32MP25_PCIEPRGCR_EN BIT(0) +#define STM32MP25_PCIEPRG_IMPCTRL_OHM GENMASK(3, 1) +#define STM32MP25_PCIEPRG_IMPCTRL_VSWING GENMASK(5, 4) + +/* SYSCFG SYSCFG_COMBOPHY_SR */ +#define STM32MP25_PIPE0_PHYSTATUS BIT(1) + +/* SYSCFG CR1 */ +#define SYSCFG_COMBOPHY_CR1_REFUSEPAD BIT(0) +#define SYSCFG_COMBOPHY_CR1_MPLLMULT GENMASK(7, 1) +#define SYSCFG_COMBOPHY_CR1_REFCLKSEL GENMASK(16, 8) +#define SYSCFG_COMBOPHY_CR1_REFCLKDIV2 BIT(17) +#define SYSCFG_COMBOPHY_CR1_REFSSPEN BIT(18) +#define SYSCFG_COMBOPHY_CR1_SSCEN BIT(19) + +/* SYSCFG CR4 */ +#define SYSCFG_COMBOPHY_CR4_RX0_EQ GENMASK(2, 0) + +#define MPLLMULT_19_2 (0x02u << 1) +#define MPLLMULT_20 (0x7Du << 1) +#define MPLLMULT_24 (0x68u << 1) +#define MPLLMULT_25 (0x64u << 1) +#define MPLLMULT_26 (0x60u << 1) +#define MPLLMULT_38_4 (0x41u << 1) +#define MPLLMULT_48 (0x6Cu << 1) +#define MPLLMULT_50 (0x32u << 1) +#define MPLLMULT_52 (0x30u << 1) +#define MPLLMULT_100 (0x19u << 1) + +#define REFCLKSEL_0 0 +#define REFCLKSEL_1 (0x108u << 8) + +#define REFCLDIV_0 0 + +/* SYSCFG CR2 */ +#define SYSCFG_COMBOPHY_CR2_MODESEL GENMASK(1, 0) +#define SYSCFG_COMBOPHY_CR2_ISO_DIS BIT(15) + +#define COMBOPHY_MODESEL_PCIE 0 +#define COMBOPHY_MODESEL_USB 3 + +/* SYSCFG CR5 */ +#define SYSCFG_COMBOPHY_CR5_COMMON_CLOCKS BIT(12) + +#define COMBOPHY_SUP_ANA_MPLL_LOOP_CTL 0xC0 +#define COMBOPHY_PROP_CNTRL GENMASK(7, 4) + +struct stm32_combophy { + struct phy *phy; + struct regmap *regmap; + struct device *dev; + void __iomem *base; + struct reset_control *phy_reset; + struct clk *phy_clk; + struct clk *pad_clk; + struct clk *ker_clk; + unsigned int type; + bool is_init; + int irq_wakeup; +}; + +struct clk_impedance { + u32 microohm; + u32 vswing[4]; +}; + +/* + * lookup table to hold the settings needed for a ref clock frequency + * impedance, the offset is used to set the IMP_CTL and DE_EMP bit of the + * PRG_IMP_CTRL register + */ +static const struct clk_impedance imp_lookup[] = { + { 6090000, { 442000, 564000, 684000, 802000 } }, + { 5662000, { 528000, 621000, 712000, 803000 } }, + { 5292000, { 491000, 596000, 700000, 802000 } }, + { 4968000, { 558000, 640000, 722000, 803000 } }, + { 4684000, { 468000, 581000, 692000, 802000 } }, + { 4429000, { 554000, 613000, 717000, 803000 } }, + { 4204000, { 511000, 609000, 706000, 802000 } }, + { 3999000, { 571000, 648000, 726000, 803000 } } +}; + +static int stm32_impedance_tune(struct stm32_combophy *combophy) +{ + u8 imp_size = ARRAY_SIZE(imp_lookup); + u8 vswing_size = ARRAY_SIZE(imp_lookup[0].vswing); + u8 imp_of, vswing_of; + u32 max_imp = imp_lookup[0].microohm; + u32 min_imp = imp_lookup[imp_size - 1].microohm; + u32 max_vswing = imp_lookup[imp_size - 1].vswing[vswing_size - 1]; + u32 min_vswing = imp_lookup[0].vswing[0]; + u32 val; + + if (!of_property_read_u32(combophy->dev->of_node, "st,output-micro-ohms", &val)) { + if (val < min_imp || val > max_imp) { + dev_err(combophy->dev, "Invalid value %u for output ohm\n", val); + return -EINVAL; + } + + for (imp_of = 0 ; imp_of < ARRAY_SIZE(imp_lookup); imp_of++) + if (imp_lookup[imp_of].microohm <= val) + break; + + dev_dbg(combophy->dev, "Set %u micro-ohms output impedance\n", + imp_lookup[imp_of].microohm); + + regmap_update_bits(combophy->regmap, SYSCFG_PCIEPRGCR, + STM32MP25_PCIEPRG_IMPCTRL_OHM, + FIELD_PREP(STM32MP25_PCIEPRG_IMPCTRL_OHM, imp_of)); + } else { + regmap_read(combophy->regmap, SYSCFG_PCIEPRGCR, &val); + imp_of = FIELD_GET(STM32MP25_PCIEPRG_IMPCTRL_OHM, val); + } + + if (!of_property_read_u32(combophy->dev->of_node, "st,output-vswing-microvolt", &val)) { + if (val < min_vswing || val > max_vswing) { + dev_err(combophy->dev, "Invalid value %u for output vswing\n", val); + return -EINVAL; + } + + for (vswing_of = 0 ; vswing_of < ARRAY_SIZE(imp_lookup[imp_of].vswing); vswing_of++) + if (imp_lookup[imp_of].vswing[vswing_of] >= val) + break; + + dev_dbg(combophy->dev, "Set %u microvolt swing\n", + imp_lookup[imp_of].vswing[vswing_of]); + + regmap_update_bits(combophy->regmap, SYSCFG_PCIEPRGCR, + STM32MP25_PCIEPRG_IMPCTRL_VSWING, + FIELD_PREP(STM32MP25_PCIEPRG_IMPCTRL_VSWING, vswing_of)); + } + + return 0; +} + +static int stm32_combophy_pll_init(struct stm32_combophy *combophy) +{ + int ret; + u32 refclksel, pllmult, propcntrl, val; + u32 clk_rate; + + if (combophy->pad_clk) + clk_rate = clk_get_rate(combophy->pad_clk); + else + clk_rate = clk_get_rate(combophy->ker_clk); + + reset_control_assert(combophy->phy_reset); + + dev_dbg(combophy->dev, "%s pll init rate %d\n", + combophy->pad_clk ? "External" : "Ker", clk_rate); + + /* + * vddcombophy is interconnected with vddcore. Isolation bit should be unset + * before using the ComboPHY. + */ + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR2, + SYSCFG_COMBOPHY_CR2_ISO_DIS, SYSCFG_COMBOPHY_CR2_ISO_DIS); + + if (combophy->type != PHY_TYPE_PCIE) + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFSSPEN, SYSCFG_COMBOPHY_CR1_REFSSPEN); + + if (combophy->type == PHY_TYPE_PCIE && !combophy->pad_clk) + regmap_update_bits(combophy->regmap, SYSCFG_PCIEPRGCR, + STM32MP25_PCIEPRGCR_EN, STM32MP25_PCIEPRGCR_EN); + + if (of_property_read_bool(combophy->dev->of_node, "st,ssc-on")) { + dev_dbg(combophy->dev, "Enabling clock with SSC\n"); + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_SSCEN, SYSCFG_COMBOPHY_CR1_SSCEN); + } + + if (!of_property_read_u32(combophy->dev->of_node, "st,rx-equalizer", &val)) { + dev_dbg(combophy->dev, "Set RX equalizer %u\n", val); + if (val > SYSCFG_COMBOPHY_CR4_RX0_EQ) { + dev_err(combophy->dev, "Invalid value %u for rx0 equalizer\n", val); + return -EINVAL; + } + + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR4, + SYSCFG_COMBOPHY_CR4_RX0_EQ, val); + } + + if (combophy->type == PHY_TYPE_PCIE) { + ret = stm32_impedance_tune(combophy); + if (ret) { + reset_control_deassert(combophy->phy_reset); + goto out; + } + + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFUSEPAD, + combophy->pad_clk ? SYSCFG_COMBOPHY_CR1_REFUSEPAD : 0); + } + + switch (clk_rate) { + case 100000000: + pllmult = MPLLMULT_100; + refclksel = REFCLKSEL_0; + propcntrl = 0x8u << 4; + break; + case 19200000: + pllmult = MPLLMULT_19_2; + refclksel = REFCLKSEL_1; + propcntrl = 0x8u << 4; + break; + case 25000000: + pllmult = MPLLMULT_25; + refclksel = REFCLKSEL_0; + propcntrl = 0xEu << 4; + break; + case 24000000: + pllmult = MPLLMULT_24; + refclksel = REFCLKSEL_1; + propcntrl = 0xEu << 4; + break; + case 20000000: + pllmult = MPLLMULT_20; + refclksel = REFCLKSEL_0; + propcntrl = 0xEu << 4; + break; + default: + dev_err(combophy->dev, "Invalid rate 0x%x\n", clk_rate); + reset_control_deassert(combophy->phy_reset); + ret = -EINVAL; + goto out; + }; + + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFCLKDIV2, REFCLDIV_0); + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFCLKSEL, refclksel); + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_MPLLMULT, pllmult); + + /* + * Force elasticity buffer to be tuned for the reference clock as + * the separated clock model is not supported + */ + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR5, + SYSCFG_COMBOPHY_CR5_COMMON_CLOCKS, SYSCFG_COMBOPHY_CR5_COMMON_CLOCKS); + + reset_control_deassert(combophy->phy_reset); + + ret = regmap_read_poll_timeout(combophy->regmap, SYSCFG_COMBOPHY_SR, val, + !(val & STM32MP25_PIPE0_PHYSTATUS), + 10, 1000); + if (ret) { + dev_err(combophy->dev, "timeout, cannot lock PLL\n"); + goto out; + } + + if (combophy->type == PHY_TYPE_PCIE) { + val = readl_relaxed(combophy->base + COMBOPHY_SUP_ANA_MPLL_LOOP_CTL); + val &= ~COMBOPHY_PROP_CNTRL; + val |= propcntrl; + writel_relaxed(val, combophy->base + COMBOPHY_SUP_ANA_MPLL_LOOP_CTL); + } + + return 0; + +out: + if (combophy->type == PHY_TYPE_PCIE && !combophy->pad_clk) + regmap_update_bits(combophy->regmap, SYSCFG_PCIEPRGCR, + STM32MP25_PCIEPRGCR_EN, 0); + + if (combophy->type != PHY_TYPE_PCIE) + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFSSPEN, 0); + + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR2, + SYSCFG_COMBOPHY_CR2_ISO_DIS, 0); + + return ret; +} + +static struct phy *stm32_combophy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct stm32_combophy *combophy = dev_get_drvdata(dev); + unsigned int type; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + type = args->args[0]; + if (type != PHY_TYPE_USB3 && type != PHY_TYPE_PCIE) { + dev_err(dev, "unsupported device type: %d\n", type); + return ERR_PTR(-EINVAL); + } + + if (combophy->pad_clk && type != PHY_TYPE_PCIE) { + dev_err(dev, "Invalid use of clk_pad for USB3 mode\n"); + return ERR_PTR(-EINVAL); + } + + combophy->type = type; + + return combophy->phy; +} + +static int stm32_combophy_set_mode(struct stm32_combophy *combophy) +{ + int type = combophy->type; + u32 val; + + switch (type) { + case PHY_TYPE_PCIE: + dev_dbg(combophy->dev, "setting PCIe ComboPHY\n"); + val = COMBOPHY_MODESEL_PCIE; + break; + case PHY_TYPE_USB3: + dev_dbg(combophy->dev, "setting USB3 ComboPHY\n"); + val = COMBOPHY_MODESEL_USB; + break; + default: + dev_err(combophy->dev, "Invalid PHY mode %d\n", type); + return -EINVAL; + } + + return regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR2, + SYSCFG_COMBOPHY_CR2_MODESEL, val); +} + +static int stm32_combophy_enable_clocks(struct stm32_combophy *combophy) +{ + int ret; + + ret = clk_prepare_enable(combophy->phy_clk); + if (ret) { + dev_err(combophy->dev, "Core clock enable failed %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(combophy->ker_clk); + if (ret) { + dev_err(combophy->dev, "ker_usb3pcie clock enable failed %d\n", ret); + clk_disable_unprepare(combophy->phy_clk); + return ret; + } + + if (combophy->pad_clk) { + ret = clk_prepare_enable(combophy->pad_clk); + if (ret) { + dev_err(combophy->dev, "External clock enable failed %d\n", ret); + clk_disable_unprepare(combophy->ker_clk); + clk_disable_unprepare(combophy->phy_clk); + return ret; + } + } + + return 0; +} + +static void stm32_combophy_disable_clocks(struct stm32_combophy *combophy) +{ + if (combophy->pad_clk) + clk_disable_unprepare(combophy->pad_clk); + clk_disable_unprepare(combophy->ker_clk); + clk_disable_unprepare(combophy->phy_clk); +} + +static int stm32_combophy_suspend_noirq(struct device *dev) +{ + struct stm32_combophy *combophy = dev_get_drvdata(dev); + + /* + * Clocks should be turned off since it is not needed for + * wakeup capability. In case usb-remote wakeup is not enabled, + * combo-phy is already turned off by HCD driver using exit callback + */ + if (combophy->is_init) { + stm32_combophy_disable_clocks(combophy); + + /* since wakeup is enabled for ctrl */ + enable_irq_wake(combophy->irq_wakeup); + } + + return 0; +} + +static int stm32_combophy_resume_noirq(struct device *dev) +{ + struct stm32_combophy *combophy = dev_get_drvdata(dev); + int ret; + + /* + * If clocks was turned off by suspend call for wakeup then needs + * to be turned back ON in resume. In case usb-remote wakeup is not + * enabled, clocks already turned ON by HCD driver using init callback + */ + if (combophy->is_init) { + /* since wakeup was enabled for ctrl */ + disable_irq_wake(combophy->irq_wakeup); + + ret = stm32_combophy_enable_clocks(combophy); + if (ret) { + dev_err(dev, "can't enable clocks (%d)\n", ret); + return ret; + } + } + + return 0; +} + +static int stm32_combophy_exit(struct phy *phy) +{ + struct stm32_combophy *combophy = phy_get_drvdata(phy); + struct device *dev = combophy->dev; + + combophy->is_init = false; + + if (combophy->type == PHY_TYPE_PCIE && !combophy->pad_clk) + regmap_update_bits(combophy->regmap, SYSCFG_PCIEPRGCR, + STM32MP25_PCIEPRGCR_EN, 0); + + if (combophy->type != PHY_TYPE_PCIE) + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR1, + SYSCFG_COMBOPHY_CR1_REFSSPEN, 0); + + regmap_update_bits(combophy->regmap, SYSCFG_COMBOPHY_CR2, + SYSCFG_COMBOPHY_CR2_ISO_DIS, 0); + + stm32_combophy_disable_clocks(combophy); + + pm_runtime_put_noidle(dev); + + return 0; +} + +static int stm32_combophy_init(struct phy *phy) +{ + struct stm32_combophy *combophy = phy_get_drvdata(phy); + struct device *dev = combophy->dev; + int ret; + + pm_runtime_get_noresume(dev); + + ret = stm32_combophy_enable_clocks(combophy); + if (ret) { + dev_err(dev, "Clock enable failed %d\n", ret); + pm_runtime_put_noidle(dev); + return ret; + } + + ret = stm32_combophy_set_mode(combophy); + if (ret) { + dev_err(dev, "combophy mode not set\n"); + stm32_combophy_disable_clocks(combophy); + pm_runtime_put_noidle(dev); + return ret; + } + + ret = stm32_combophy_pll_init(combophy); + if (ret) { + stm32_combophy_disable_clocks(combophy); + pm_runtime_put_noidle(dev); + return ret; + } + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + combophy->is_init = true; + + return ret; +} + +static const struct phy_ops stm32_combophy_phy_data = { + .init = stm32_combophy_init, + .exit = stm32_combophy_exit, + .owner = THIS_MODULE +}; + +static irqreturn_t stm32_combophy_irq_wakeup_handler(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static int stm32_combophy_probe(struct platform_device *pdev) +{ + struct stm32_combophy *combophy; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + int ret, irq; + + combophy = devm_kzalloc(dev, sizeof(*combophy), GFP_KERNEL); + if (!combophy) + return -ENOMEM; + + combophy->dev = dev; + + dev_set_drvdata(dev, combophy); + + combophy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(combophy->base)) + return PTR_ERR(combophy->base); + + combophy->phy_clk = devm_clk_get(dev, "apb"); + if (IS_ERR(combophy->phy_clk)) + return dev_err_probe(dev, PTR_ERR(combophy->phy_clk), + "Failed to get PHY clock source\n"); + + combophy->ker_clk = devm_clk_get(dev, "ker"); + if (IS_ERR(combophy->ker_clk)) + return dev_err_probe(dev, PTR_ERR(combophy->ker_clk), + "Failed to get PHY internal clock source\n"); + + combophy->pad_clk = devm_clk_get_optional(dev, "pad"); + if (IS_ERR(combophy->pad_clk)) + return dev_err_probe(dev, PTR_ERR(combophy->pad_clk), + "Failed to get PHY external clock source\n"); + + combophy->phy_reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(combophy->phy_reset)) + return dev_err_probe(dev, PTR_ERR(combophy->phy_reset), + "Failed to get PHY reset\n"); + + combophy->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(combophy->regmap)) + return dev_err_probe(dev, PTR_ERR(combophy->regmap), + "No syscfg phandle specified\n"); + + combophy->phy = devm_phy_create(dev, NULL, &stm32_combophy_phy_data); + if (IS_ERR(combophy->phy)) + return dev_err_probe(dev, PTR_ERR(combophy->phy), + "failed to create PCIe/USB3 ComboPHY\n"); + + if (device_property_read_bool(dev, "wakeup-source")) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return dev_err_probe(dev, irq, "failed to get IRQ\n"); + combophy->irq_wakeup = irq; + + ret = devm_request_threaded_irq(dev, combophy->irq_wakeup, NULL, + stm32_combophy_irq_wakeup_handler, IRQF_ONESHOT, + NULL, NULL); + if (ret) + return dev_err_probe(dev, ret, "unable to request wake IRQ %d\n", + combophy->irq_wakeup); + } + + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable pm runtime\n"); + + phy_set_drvdata(combophy->phy, combophy); + + phy_provider = devm_of_phy_provider_register(dev, stm32_combophy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct dev_pm_ops stm32_combophy_pm_ops = { + NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_combophy_suspend_noirq, + stm32_combophy_resume_noirq) +}; + +static const struct of_device_id stm32_combophy_of_match[] = { + { .compatible = "st,stm32mp25-combophy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stm32_combophy_of_match); + +static struct platform_driver stm32_combophy_driver = { + .probe = stm32_combophy_probe, + .driver = { + .name = "stm32-combophy", + .of_match_table = stm32_combophy_of_match, + .pm = pm_sleep_ptr(&stm32_combophy_pm_ops) + } +}; + +module_platform_driver(stm32_combophy_driver); + +MODULE_AUTHOR("Christian Bruel "); +MODULE_DESCRIPTION("STM32MP25 Combophy USB3/PCIe controller driver"); +MODULE_LICENSE("GPL");