diff mbox series

[1/1] arm64: dts: rockchip: disable display subsystem only for Radxa E25

Message ID 20240820120020.469375-1-amadeus@jmu.edu.cn (mailing list archive)
State New, archived
Headers show
Series [1/1] arm64: dts: rockchip: disable display subsystem only for Radxa E25 | expand

Commit Message

Chukun Pan Aug. 20, 2024, noon UTC
The SoM board has reserved HDMI output, while the Radxa E25
is not connected. So disable the display subsystem only for
Radxa E25.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 4 ----
 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts   | 4 ++++
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Dragan Simic Aug. 20, 2024, 2:28 p.m. UTC | #1
Hello Chukun,

On 2024-08-20 14:00, Chukun Pan wrote:
> The SoM board has reserved HDMI output, while the Radxa E25
> is not connected. So disable the display subsystem only for
> Radxa E25.
> 
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

Looking good to me, thanks for the patch.  The carrier board is what's
responsible for exposing the actual HDMI port from the SoM.

Reviewed-by: Dragan Simic <dsimic@manjaro.org>

> ---
>  arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 4 ----
>  arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts   | 4 ++++
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
> index 45b03dcbbad4..19d309654bdb 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
> @@ -108,10 +108,6 @@ &cpu3 {
>  	cpu-supply = <&vdd_cpu>;
>  };
> 
> -&display_subsystem {
> -	status = "disabled";
> -};
> -
>  &gpu {
>  	mali-supply = <&vdd_gpu>;
>  	status = "okay";
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> index 72ad74c38a2b..84a0789fad96 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> @@ -103,6 +103,10 @@ &combphy1 {
>  	phy-supply = <&vcc3v3_pcie30x1>;
>  };
> 
> +&display_subsystem {
> +	status = "disabled";
> +};
> +
>  &pcie2x1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pcie20_reset_h>;
Heiko Stübner Aug. 28, 2024, 3:14 p.m. UTC | #2
On Tue, 20 Aug 2024 20:00:20 +0800, Chukun Pan wrote:
> The SoM board has reserved HDMI output, while the Radxa E25
> is not connected. So disable the display subsystem only for
> Radxa E25.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: disable display subsystem only for Radxa E25
      commit: 5d4b29c2bf1b2b08522c48f211311404b8075bd1

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
index 45b03dcbbad4..19d309654bdb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
@@ -108,10 +108,6 @@  &cpu3 {
 	cpu-supply = <&vdd_cpu>;
 };
 
-&display_subsystem {
-	status = "disabled";
-};
-
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
index 72ad74c38a2b..84a0789fad96 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -103,6 +103,10 @@  &combphy1 {
 	phy-supply = <&vcc3v3_pcie30x1>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &pcie2x1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie20_reset_h>;