@@ -48,4 +48,28 @@ static inline u64 gcsss2(void)
return Xt;
}
+#ifdef CONFIG_ARM64_GCS
+
+static inline bool task_gcs_el0_enabled(struct task_struct *task)
+{
+ return current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE;
+}
+
+void gcs_set_el0_mode(struct task_struct *task);
+void gcs_free(struct task_struct *task);
+void gcs_preserve_current_state(void);
+
+#else
+
+static inline bool task_gcs_el0_enabled(struct task_struct *task)
+{
+ return false;
+}
+
+static inline void gcs_set_el0_mode(struct task_struct *task) { }
+static inline void gcs_free(struct task_struct *task) { }
+static inline void gcs_preserve_current_state(void) { }
+
+#endif
+
#endif
@@ -184,6 +184,12 @@ struct thread_struct {
u64 sctlr_user;
u64 svcr;
u64 tpidr2_el0;
+#ifdef CONFIG_ARM64_GCS
+ unsigned int gcs_el0_mode;
+ u64 gcspr_el0;
+ u64 gcs_base;
+ u64 gcs_size;
+#endif
};
static inline unsigned int thread_get_vl(struct thread_struct *thread,
@@ -48,6 +48,7 @@
#include <asm/cacheflush.h>
#include <asm/exec.h>
#include <asm/fpsimd.h>
+#include <asm/gcs.h>
#include <asm/mmu_context.h>
#include <asm/mte.h>
#include <asm/processor.h>
@@ -271,12 +272,32 @@ static void flush_tagged_addr_state(void)
clear_thread_flag(TIF_TAGGED_ADDR);
}
+#ifdef CONFIG_ARM64_GCS
+
+static void flush_gcs(void)
+{
+ if (!system_supports_gcs())
+ return;
+
+ gcs_free(current);
+ current->thread.gcs_el0_mode = 0;
+ write_sysreg_s(0, SYS_GCSCRE0_EL1);
+ write_sysreg_s(0, SYS_GCSPR_EL0);
+}
+
+#else
+
+static void flush_gcs(void) { }
+
+#endif
+
void flush_thread(void)
{
fpsimd_flush_thread();
tls_thread_flush();
flush_ptrace_hw_breakpoint(current);
flush_tagged_addr_state();
+ flush_gcs();
}
void arch_release_task_struct(struct task_struct *tsk)
@@ -471,6 +492,40 @@ static void entry_task_switch(struct task_struct *next)
__this_cpu_write(__entry_task, next);
}
+#ifdef CONFIG_ARM64_GCS
+
+void gcs_preserve_current_state(void)
+{
+ current->thread.gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
+}
+
+static void gcs_thread_switch(struct task_struct *next)
+{
+ if (!system_supports_gcs())
+ return;
+
+ /* GCSPR_EL0 is always readable */
+ gcs_preserve_current_state();
+ write_sysreg_s(next->thread.gcspr_el0, SYS_GCSPR_EL0);
+
+ if (current->thread.gcs_el0_mode != next->thread.gcs_el0_mode)
+ gcs_set_el0_mode(next);
+
+ /*
+ * Ensure that GCS changes are observable by/from other PEs in
+ * case of migration.
+ */
+ gcsb_dsync();
+}
+
+#else
+
+static void gcs_thread_switch(struct task_struct *next)
+{
+}
+
+#endif
+
/*
* ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
* Ensure access is disabled when switching to a 32bit task, ensure
@@ -530,6 +585,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
ssbs_thread_switch(next);
erratum_1418040_thread_switch(next);
ptrauth_thread_switch_user(next);
+ gcs_thread_switch(next);
/*
* Complete any pending TLB or cache maintenance on this CPU in case
@@ -11,6 +11,7 @@ obj-$(CONFIG_TRANS_TABLE) += trans_pgd.o
obj-$(CONFIG_TRANS_TABLE) += trans_pgd-asm.o
obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
obj-$(CONFIG_ARM64_MTE) += mteswap.o
+obj-$(CONFIG_ARM64_GCS) += gcs.o
KASAN_SANITIZE_physaddr.o += n
obj-$(CONFIG_KASAN) += kasan_init.o
new file mode 100644
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/syscalls.h>
+#include <linux/types.h>
+
+#include <asm/cpufeature.h>
+#include <asm/page.h>
+
+/*
+ * Apply the GCS mode configured for the specified task to the
+ * hardware.
+ */
+void gcs_set_el0_mode(struct task_struct *task)
+{
+ u64 gcscre0_el1 = GCSCRE0_EL1_nTR;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE)
+ gcscre0_el1 |= GCSCRE0_EL1_RVCHKEN | GCSCRE0_EL1_PCRSEL;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_WRITE)
+ gcscre0_el1 |= GCSCRE0_EL1_STREn;
+
+ if (task->thread.gcs_el0_mode & PR_SHADOW_STACK_PUSH)
+ gcscre0_el1 |= GCSCRE0_EL1_PUSHMEn;
+
+ write_sysreg_s(gcscre0_el1, SYS_GCSCRE0_EL1);
+}
+
+void gcs_free(struct task_struct *task)
+{
+ if (task->thread.gcs_base)
+ vm_munmap(task->thread.gcs_base, task->thread.gcs_size);
+
+ task->thread.gcspr_el0 = 0;
+ task->thread.gcs_base = 0;
+ task->thread.gcs_size = 0;
+}
There are two registers controlling the GCS state of EL0, GCSPR_EL0 which is the current GCS pointer and GCSCRE0_EL1 which has enable bits for the specific GCS functionality enabled for EL0. Manage these on context switch and process lifetime events, GCS is reset on exec(). Also ensure that any changes to the GCS memory are visible to other PEs and that changes from other PEs are visible on this one by issuing a GCSB DSYNC when moving to or from a thread with GCS. Since the current GCS configuration of a thread will be visible to userspace we store the configuration in the format used with userspace and provide a helper which configures the system register as needed. On systems that support GCS we always allow access to GCSPR_EL0, this facilitates reporting of GCS faults if userspace implements disabling of GCS on error - the GCS can still be discovered and examined even if GCS has been disabled. Signed-off-by: Mark Brown <broonie@kernel.org> --- arch/arm64/include/asm/gcs.h | 24 ++++++++++++++++ arch/arm64/include/asm/processor.h | 6 ++++ arch/arm64/kernel/process.c | 56 ++++++++++++++++++++++++++++++++++++++ arch/arm64/mm/Makefile | 1 + arch/arm64/mm/gcs.c | 39 ++++++++++++++++++++++++++ 5 files changed, 126 insertions(+)