diff mbox series

arm64: dts: imx8mp-evk: Add native HDMI output

Message ID 20240822033318.753724-1-victor.liu@nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mp-evk: Add native HDMI output | expand

Commit Message

Liu Ying Aug. 22, 2024, 3:33 a.m. UTC 
J17 on i.MX8mp EVK base board is a HDMI type A connector.
It connects with i.MX8mp HDMI PHY.  Add support for it.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 46 ++++++++++++++++++++
 1 file changed, 46 insertions(+)

Comments

Frank Li Aug. 22, 2024, 4:16 a.m. UTC | #1 
On Thu, Aug 22, 2024 at 11:33:18AM +0800, Liu Ying wrote:
> J17 on i.MX8mp EVK base board is a HDMI type A connector.
> It connects with i.MX8mp HDMI PHY.  Add support for it.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 46 ++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 938347704136..f118fe8ab5ac 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -56,6 +56,18 @@ memory@40000000 {
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
>
> +	native-hdmi-connector {
> +		compatible = "hdmi-connector";
> +		label = "HDMI OUT";
> +		type = "a";
> +
> +		port {
> +			hdmi_out: endpoint {
> +				remote-endpoint = <&hdmi_tx_out>;
> +			};
> +		};
> +	};
> +
>  	pcie0_refclk: pcie0-refclk {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> @@ -408,6 +420,28 @@ &flexcan2 {
>  	status = "disabled";/* can2 pin conflict with pdm */
>  };
>
> +&hdmi_pvi {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi>;
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			hdmi_tx_out: endpoint {
> +				remote-endpoint = <&hdmi_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&hdmi_tx_phy {
> +	status = "okay";
> +};
> +
>  &i2c1 {
>  	clock-frequency = <400000>;
>  	pinctrl-names = "default";
> @@ -604,6 +638,10 @@ &lcdif1 {
>  	status = "okay";
>  };
>
> +&lcdif3 {
> +	status = "okay";
> +};
> +
>  &micfil {
>  	#sound-dai-cells = <0>;
>  	pinctrl-names = "default";
> @@ -858,6 +896,14 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
>  		>;
>  	};
>
> +	pinctrl_hdmi: hdmigrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
> +			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
> +			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
> +		>;
> +	};
> +
>  	pinctrl_hog: hoggrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
> --
> 2.34.1
>
Alexander Stein Aug. 22, 2024, 6:27 a.m. UTC | #2 
Hi,

Am Donnerstag, 22. August 2024, 05:33:18 CEST schrieb Liu Ying:
> J17 on i.MX8mp EVK base board is a HDMI type A connector.
> It connects with i.MX8mp HDMI PHY.  Add support for it.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 46 ++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 938347704136..f118fe8ab5ac 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -56,6 +56,18 @@ memory@40000000 {
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
>  
> +	native-hdmi-connector {

Is there a non-nativ HDMI connector? If not this is somewhat misleading.

> +		compatible = "hdmi-connector";
> +		label = "HDMI OUT";
> +		type = "a";
> +
> +		port {
> +			hdmi_out: endpoint {

That's an input port of the HDMI connector. It should be called hdmi_in or similar.
Right now it's connecting 'hdmi_out' and 'hdmi_tx_out' which looks confusing.

Best regards,
Alexander

> +				remote-endpoint = <&hdmi_tx_out>;
> +			};
> +		};
> +	};
> +
>  	pcie0_refclk: pcie0-refclk {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> @@ -408,6 +420,28 @@ &flexcan2 {
>  	status = "disabled";/* can2 pin conflict with pdm */
>  };
>  
> +&hdmi_pvi {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi>;
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			hdmi_tx_out: endpoint {
> +				remote-endpoint = <&hdmi_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&hdmi_tx_phy {
> +	status = "okay";
> +};
> +
>  &i2c1 {
>  	clock-frequency = <400000>;
>  	pinctrl-names = "default";
> @@ -604,6 +638,10 @@ &lcdif1 {
>  	status = "okay";
>  };
>  
> +&lcdif3 {
> +	status = "okay";
> +};
> +
>  &micfil {
>  	#sound-dai-cells = <0>;
>  	pinctrl-names = "default";
> @@ -858,6 +896,14 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
>  		>;
>  	};
>  
> +	pinctrl_hdmi: hdmigrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
> +			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
> +			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
> +		>;
> +	};
> +
>  	pinctrl_hog: hoggrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
>
Liu Ying Aug. 22, 2024, 6:37 a.m. UTC | #3 
On 08/22/2024, Alexander Stein wrote:
> Hi,

Hi,

> 
> Am Donnerstag, 22. August 2024, 05:33:18 CEST schrieb Liu Ying:
>> J17 on i.MX8mp EVK base board is a HDMI type A connector.
>> It connects with i.MX8mp HDMI PHY.  Add support for it.
>>
>> Signed-off-by: Liu Ying <victor.liu@nxp.com>
>> ---
>>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 46 ++++++++++++++++++++
>>  1 file changed, 46 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> index 938347704136..f118fe8ab5ac 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> @@ -56,6 +56,18 @@ memory@40000000 {
>>  		      <0x1 0x00000000 0 0xc0000000>;
>>  	};
>>  
>> +	native-hdmi-connector {
> 
> Is there a non-nativ HDMI connector? If not this is somewhat misleading.

Yes, there is a 'hdmi-connector' node in this file.
It is for ADV7535 MIPI DSI to HDMI bridge.

> 
>> +		compatible = "hdmi-connector";
>> +		label = "HDMI OUT";
>> +		type = "a";
>> +
>> +		port {
>> +			hdmi_out: endpoint {
> 
> That's an input port of the HDMI connector. It should be called hdmi_in or similar.
> Right now it's connecting 'hdmi_out' and 'hdmi_tx_out' which looks confusing.

I'll use hdmi_in in next version.  Thanks.

> 
> Best regards,
> Alexander
> 
>> +				remote-endpoint = <&hdmi_tx_out>;
>> +			};
>> +		};
>> +	};
>> +
>>  	pcie0_refclk: pcie0-refclk {
>>  		compatible = "fixed-clock";
>>  		#clock-cells = <0>;
>> @@ -408,6 +420,28 @@ &flexcan2 {
>>  	status = "disabled";/* can2 pin conflict with pdm */
>>  };
>>  
>> +&hdmi_pvi {
>> +	status = "okay";
>> +};
>> +
>> +&hdmi_tx {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_hdmi>;
>> +	status = "okay";
>> +
>> +	ports {
>> +		port@1 {
>> +			hdmi_tx_out: endpoint {
>> +				remote-endpoint = <&hdmi_out>;
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&hdmi_tx_phy {
>> +	status = "okay";
>> +};
>> +
>>  &i2c1 {
>>  	clock-frequency = <400000>;
>>  	pinctrl-names = "default";
>> @@ -604,6 +638,10 @@ &lcdif1 {
>>  	status = "okay";
>>  };
>>  
>> +&lcdif3 {
>> +	status = "okay";
>> +};
>> +
>>  &micfil {
>>  	#sound-dai-cells = <0>;
>>  	pinctrl-names = "default";
>> @@ -858,6 +896,14 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
>>  		>;
>>  	};
>>  
>> +	pinctrl_hdmi: hdmigrp {
>> +		fsl,pins = <
>> +			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
>> +			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
>> +			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
>> +		>;
>> +	};
>> +
>>  	pinctrl_hog: hoggrp {
>>  		fsl,pins = <
>>  			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
>>
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 938347704136..f118fe8ab5ac 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -56,6 +56,18 @@  memory@40000000 {
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_out: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -408,6 +420,28 @@  &flexcan2 {
 	status = "disabled";/* can2 pin conflict with pdm */
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -604,6 +638,10 @@  &lcdif1 {
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &micfil {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -858,6 +896,14 @@  MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010