Message ID | 20240823101933.9517-2-liaoyuanhong@vivo.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | dma:Use devm_clk_get_enabled() helpers | expand |
On Fri, 23 Aug 2024 18:19:28 +0800 Liao Yuanhong <liaoyuanhong@vivo.com> wrote: > Use devm_clk_get_enabled() instead of clk functions in at_hdmac. Doesn't this stop the clock being turned of in suspend? Or is there some magic handling that which I'm not aware of? > > Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> > --- > drivers/dma/at_hdmac.c | 22 +++++----------------- > 1 file changed, 5 insertions(+), 17 deletions(-) > > diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c > index 40052d1bd0b5..b1e10541cb12 100644 > --- a/drivers/dma/at_hdmac.c > +++ b/drivers/dma/at_hdmac.c > @@ -337,7 +337,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) > * struct at_dma - internal representation of an Atmel HDMA Controller > * @dma_device: dmaengine dma_device object members > * @regs: memory mapped register base > - * @clk: dma controller clock > * @save_imr: interrupt mask register that is saved on suspend/resume cycle > * @all_chan_mask: all channels availlable in a mask > * @lli_pool: hw lli table > @@ -347,7 +346,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) > struct at_dma { > struct dma_device dma_device; > void __iomem *regs; > - struct clk *clk; > u32 save_imr; > > u8 all_chan_mask; > @@ -1942,6 +1940,7 @@ static int __init at_dma_probe(struct platform_device *pdev) > int err; > int i; > const struct at_dma_platform_data *plat_dat; > + struct clk *clk; > > /* setup platform data for each SoC */ > dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask); > @@ -1975,20 +1974,16 @@ static int __init at_dma_probe(struct platform_device *pdev) > atdma->dma_device.cap_mask = plat_dat->cap_mask; > atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1; > > - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk"); > - if (IS_ERR(atdma->clk)) > - return PTR_ERR(atdma->clk); > - > - err = clk_prepare_enable(atdma->clk); > - if (err) > - return err; > + clk = devm_clk_get_enabled(&pdev->dev, "dma_clk"); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > > /* force dma off, just in case */ > at_dma_off(atdma); > > err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma); > if (err) > - goto err_irq; > + return err; > > platform_set_drvdata(pdev, atdma); > > @@ -2105,8 +2100,6 @@ static int __init at_dma_probe(struct platform_device *pdev) > dma_pool_destroy(atdma->lli_pool); > err_desc_pool_create: > free_irq(platform_get_irq(pdev, 0), atdma); > -err_irq: > - clk_disable_unprepare(atdma->clk); > return err; > } > > @@ -2130,8 +2123,6 @@ static void at_dma_remove(struct platform_device *pdev) > atc_disable_chan_irq(atdma, chan->chan_id); > list_del(&chan->device_node); > } > - > - clk_disable_unprepare(atdma->clk); > } > > static void at_dma_shutdown(struct platform_device *pdev) > @@ -2139,7 +2130,6 @@ static void at_dma_shutdown(struct platform_device *pdev) > struct at_dma *atdma = platform_get_drvdata(pdev); > > at_dma_off(platform_get_drvdata(pdev)); > - clk_disable_unprepare(atdma->clk); > } > > static int at_dma_prepare(struct device *dev) > @@ -2194,7 +2184,6 @@ static int at_dma_suspend_noirq(struct device *dev) > > /* disable DMA controller */ > at_dma_off(atdma); > - clk_disable_unprepare(atdma->clk); > return 0; > } > > @@ -2223,7 +2212,6 @@ static int at_dma_resume_noirq(struct device *dev) > struct dma_chan *chan, *_chan; > > /* bring back DMA controller */ > - clk_prepare_enable(atdma->clk); > dma_writel(atdma, EN, AT_DMA_ENABLE); > > /* clear any pending interrupt */
On 23/08/2024 at 12:19, Liao Yuanhong wrote: > Use devm_clk_get_enabled() instead of clk functions in at_hdmac. > > Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> With this patch, you remove the possibility to stop the clock during a suspend/resume cycle: why avoid to gain power during... low power phases? NACK. Regards, Nicolas > --- > drivers/dma/at_hdmac.c | 22 +++++----------------- > 1 file changed, 5 insertions(+), 17 deletions(-) > > diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c > index 40052d1bd0b5..b1e10541cb12 100644 > --- a/drivers/dma/at_hdmac.c > +++ b/drivers/dma/at_hdmac.c > @@ -337,7 +337,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) > * struct at_dma - internal representation of an Atmel HDMA Controller > * @dma_device: dmaengine dma_device object members > * @regs: memory mapped register base > - * @clk: dma controller clock > * @save_imr: interrupt mask register that is saved on suspend/resume cycle > * @all_chan_mask: all channels availlable in a mask > * @lli_pool: hw lli table > @@ -347,7 +346,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) > struct at_dma { > struct dma_device dma_device; > void __iomem *regs; > - struct clk *clk; > u32 save_imr; > > u8 all_chan_mask; > @@ -1942,6 +1940,7 @@ static int __init at_dma_probe(struct platform_device *pdev) > int err; > int i; > const struct at_dma_platform_data *plat_dat; > + struct clk *clk; > > /* setup platform data for each SoC */ > dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask); > @@ -1975,20 +1974,16 @@ static int __init at_dma_probe(struct platform_device *pdev) > atdma->dma_device.cap_mask = plat_dat->cap_mask; > atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1; > > - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk"); > - if (IS_ERR(atdma->clk)) > - return PTR_ERR(atdma->clk); > - > - err = clk_prepare_enable(atdma->clk); > - if (err) > - return err; > + clk = devm_clk_get_enabled(&pdev->dev, "dma_clk"); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > > /* force dma off, just in case */ > at_dma_off(atdma); > > err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma); > if (err) > - goto err_irq; > + return err; > > platform_set_drvdata(pdev, atdma); > > @@ -2105,8 +2100,6 @@ static int __init at_dma_probe(struct platform_device *pdev) > dma_pool_destroy(atdma->lli_pool); > err_desc_pool_create: > free_irq(platform_get_irq(pdev, 0), atdma); > -err_irq: > - clk_disable_unprepare(atdma->clk); > return err; > } > > @@ -2130,8 +2123,6 @@ static void at_dma_remove(struct platform_device *pdev) > atc_disable_chan_irq(atdma, chan->chan_id); > list_del(&chan->device_node); > } > - > - clk_disable_unprepare(atdma->clk); > } > > static void at_dma_shutdown(struct platform_device *pdev) > @@ -2139,7 +2130,6 @@ static void at_dma_shutdown(struct platform_device *pdev) > struct at_dma *atdma = platform_get_drvdata(pdev); > > at_dma_off(platform_get_drvdata(pdev)); > - clk_disable_unprepare(atdma->clk); > } > > static int at_dma_prepare(struct device *dev) > @@ -2194,7 +2184,6 @@ static int at_dma_suspend_noirq(struct device *dev) > > /* disable DMA controller */ > at_dma_off(atdma); > - clk_disable_unprepare(atdma->clk); > return 0; > } > > @@ -2223,7 +2212,6 @@ static int at_dma_resume_noirq(struct device *dev) > struct dma_chan *chan, *_chan; > > /* bring back DMA controller */ > - clk_prepare_enable(atdma->clk); > dma_writel(atdma, EN, AT_DMA_ENABLE); > > /* clear any pending interrupt */ > -- > 2.25.1 > >
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 40052d1bd0b5..b1e10541cb12 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -337,7 +337,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) * struct at_dma - internal representation of an Atmel HDMA Controller * @dma_device: dmaengine dma_device object members * @regs: memory mapped register base - * @clk: dma controller clock * @save_imr: interrupt mask register that is saved on suspend/resume cycle * @all_chan_mask: all channels availlable in a mask * @lli_pool: hw lli table @@ -347,7 +346,6 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) struct at_dma { struct dma_device dma_device; void __iomem *regs; - struct clk *clk; u32 save_imr; u8 all_chan_mask; @@ -1942,6 +1940,7 @@ static int __init at_dma_probe(struct platform_device *pdev) int err; int i; const struct at_dma_platform_data *plat_dat; + struct clk *clk; /* setup platform data for each SoC */ dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask); @@ -1975,20 +1974,16 @@ static int __init at_dma_probe(struct platform_device *pdev) atdma->dma_device.cap_mask = plat_dat->cap_mask; atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1; - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk"); - if (IS_ERR(atdma->clk)) - return PTR_ERR(atdma->clk); - - err = clk_prepare_enable(atdma->clk); - if (err) - return err; + clk = devm_clk_get_enabled(&pdev->dev, "dma_clk"); + if (IS_ERR(clk)) + return PTR_ERR(clk); /* force dma off, just in case */ at_dma_off(atdma); err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma); if (err) - goto err_irq; + return err; platform_set_drvdata(pdev, atdma); @@ -2105,8 +2100,6 @@ static int __init at_dma_probe(struct platform_device *pdev) dma_pool_destroy(atdma->lli_pool); err_desc_pool_create: free_irq(platform_get_irq(pdev, 0), atdma); -err_irq: - clk_disable_unprepare(atdma->clk); return err; } @@ -2130,8 +2123,6 @@ static void at_dma_remove(struct platform_device *pdev) atc_disable_chan_irq(atdma, chan->chan_id); list_del(&chan->device_node); } - - clk_disable_unprepare(atdma->clk); } static void at_dma_shutdown(struct platform_device *pdev) @@ -2139,7 +2130,6 @@ static void at_dma_shutdown(struct platform_device *pdev) struct at_dma *atdma = platform_get_drvdata(pdev); at_dma_off(platform_get_drvdata(pdev)); - clk_disable_unprepare(atdma->clk); } static int at_dma_prepare(struct device *dev) @@ -2194,7 +2184,6 @@ static int at_dma_suspend_noirq(struct device *dev) /* disable DMA controller */ at_dma_off(atdma); - clk_disable_unprepare(atdma->clk); return 0; } @@ -2223,7 +2212,6 @@ static int at_dma_resume_noirq(struct device *dev) struct dma_chan *chan, *_chan; /* bring back DMA controller */ - clk_prepare_enable(atdma->clk); dma_writel(atdma, EN, AT_DMA_ENABLE); /* clear any pending interrupt */
Use devm_clk_get_enabled() instead of clk functions in at_hdmac. Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> --- drivers/dma/at_hdmac.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-)