diff mbox series

[5/5] reset: lpc18xx: simplify with devm_clk_get_enabled()

Message ID 20240825-reset-cleanup-scoped-v1-5-03f6d834f8c0@linaro.org (mailing list archive)
State New
Headers show
Series reset: cleanup and simplify with devm and scoped | expand

Commit Message

Krzysztof Kozlowski Aug. 25, 2024, 2:14 p.m. UTC 
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler.  Change to dev_err_probe() in handling
reset_controller_register() error to make it even simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/reset/reset-lpc18xx.c | 29 ++++-------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

Comments

Vladimir Zapolskiy Aug. 25, 2024, 8:16 p.m. UTC | #1 
On 8/25/24 17:14, Krzysztof Kozlowski wrote:
> Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
> make code simpler.  Change to dev_err_probe() in handling
> reset_controller_register() error to make it even simpler.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>

--
Best wishes,
Vladimir
Damien Le Moal Aug. 26, 2024, 4:15 a.m. UTC | #2 
On 8/25/24 11:14 PM, Krzysztof Kozlowski wrote:
> Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
> make code simpler.  Change to dev_err_probe() in handling

s/code/the code

> reset_controller_register() error to make it even simpler.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Other than this nit, looks good to me.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
diff mbox series

Patch

diff --git a/drivers/reset/reset-lpc18xx.c b/drivers/reset/reset-lpc18xx.c
index e7896e3f1851..e42b2f24a93d 100644
--- a/drivers/reset/reset-lpc18xx.c
+++ b/drivers/reset/reset-lpc18xx.c
@@ -150,28 +150,16 @@  static int lpc18xx_rgu_probe(struct platform_device *pdev)
 	if (IS_ERR(rc->base))
 		return PTR_ERR(rc->base);
 
-	rc->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	rc->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg");
 	if (IS_ERR(rc->clk_reg))
 		return dev_err_probe(&pdev->dev, PTR_ERR(rc->clk_reg),
 				     "reg clock not found\n");
 
-	rc->clk_delay = devm_clk_get(&pdev->dev, "delay");
+	rc->clk_delay = devm_clk_get_enabled(&pdev->dev, "delay");
 	if (IS_ERR(rc->clk_delay))
 		return dev_err_probe(&pdev->dev, PTR_ERR(rc->clk_delay),
 				     "delay clock not found\n");
 
-	ret = clk_prepare_enable(rc->clk_reg);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable reg clock\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(rc->clk_delay);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable delay clock\n");
-		goto dis_clk_reg;
-	}
-
 	fcclk = clk_get_rate(rc->clk_reg) / USEC_PER_SEC;
 	firc = clk_get_rate(rc->clk_delay) / USEC_PER_SEC;
 	if (fcclk == 0 || firc == 0)
@@ -187,10 +175,8 @@  static int lpc18xx_rgu_probe(struct platform_device *pdev)
 	rc->rcdev.of_node = pdev->dev.of_node;
 
 	ret = reset_controller_register(&rc->rcdev);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to register device\n");
-		goto dis_clks;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "unable to register device\n");
 
 	rc->restart_nb.priority = 192,
 	rc->restart_nb.notifier_call = lpc18xx_rgu_restart,
@@ -199,13 +185,6 @@  static int lpc18xx_rgu_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "failed to register restart handler\n");
 
 	return 0;
-
-dis_clks:
-	clk_disable_unprepare(rc->clk_delay);
-dis_clk_reg:
-	clk_disable_unprepare(rc->clk_reg);
-
-	return ret;
 }
 
 static const struct of_device_id lpc18xx_rgu_match[] = {