| Message ID | 20240826020038.2205146-1-bo.wu@vivo.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] PCI: armada8k: change to use devm_clk_get_enabled() helpers | expand |
Le 26/08/2024 à 04:00, Wu Bo a écrit : > Use devm_clk_get_enabled() instead of devm_clk_get() to make the code > cleaner and avoid calling clk_disable_unprepare() > > Signed-off-by: Wu Bo <bo.wu@vivo.com> > --- > > v2: use dev_err_probe() to handle error return > > drivers/pci/controller/dwc/pcie-armada8k.c | 36 ++++++++-------------- > 1 file changed, 13 insertions(+), 23 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c > index b5c599ccaacf..9708a6fde545 100644 > --- a/drivers/pci/controller/dwc/pcie-armada8k.c > +++ b/drivers/pci/controller/dwc/pcie-armada8k.c > @@ -284,23 +284,17 @@ static int armada8k_pcie_probe(struct platform_device *pdev) > > pcie->pci = pci; > > - pcie->clk = devm_clk_get(dev, NULL); > + pcie->clk = devm_clk_get_enabled(dev, NULL); > if (IS_ERR(pcie->clk)) > - return PTR_ERR(pcie->clk); > - > - ret = clk_prepare_enable(pcie->clk); > - if (ret) > - return ret; > - > - pcie->clk_reg = devm_clk_get(dev, "reg"); > - if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) { > - ret = -EPROBE_DEFER; > - goto fail; > - } > - if (!IS_ERR(pcie->clk_reg)) { > - ret = clk_prepare_enable(pcie->clk_reg); > - if (ret) > - goto fail_clkreg; > + return dev_err_probe(dev, PTR_ERR(pcie->clk), > + "could not enable clk\n"); > + > + pcie->clk_reg = devm_clk_get_enabled(dev, "reg"); > + if (IS_ERR(pcie->clk_reg)) { > + ret = dev_err_probe(dev, -EPROBE_DEFER, So ret = -EPROBE_DEFER after this line. PTR_ERR(pcie->clk_reg) instead? CJ > + "could not enable reg clk\n"); > + if (ret == -EPROBE_DEFER) > + return ret; > } > > /* Get the dw-pcie unit configuration/control registers base. */ > @@ -308,12 +302,12 @@ static int armada8k_pcie_probe(struct platform_device *pdev) > pci->dbi_base = devm_pci_remap_cfg_resource(dev, base); > if (IS_ERR(pci->dbi_base)) { > ret = PTR_ERR(pci->dbi_base); > - goto fail_clkreg; > + goto out; > } > > ret = armada8k_pcie_setup_phys(pcie); > if (ret) > - goto fail_clkreg; > + goto out; > > platform_set_drvdata(pdev, pcie); > > @@ -325,11 +319,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev) > > disable_phy: > armada8k_pcie_disable_phys(pcie); > -fail_clkreg: > - clk_disable_unprepare(pcie->clk_reg); > -fail: > - clk_disable_unprepare(pcie->clk); > - > +out: > return ret; > } >
diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c index b5c599ccaacf..9708a6fde545 100644 --- a/drivers/pci/controller/dwc/pcie-armada8k.c +++ b/drivers/pci/controller/dwc/pcie-armada8k.c @@ -284,23 +284,17 @@ static int armada8k_pcie_probe(struct platform_device *pdev) pcie->pci = pci; - pcie->clk = devm_clk_get(dev, NULL); + pcie->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(pcie->clk)) - return PTR_ERR(pcie->clk); - - ret = clk_prepare_enable(pcie->clk); - if (ret) - return ret; - - pcie->clk_reg = devm_clk_get(dev, "reg"); - if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) { - ret = -EPROBE_DEFER; - goto fail; - } - if (!IS_ERR(pcie->clk_reg)) { - ret = clk_prepare_enable(pcie->clk_reg); - if (ret) - goto fail_clkreg; + return dev_err_probe(dev, PTR_ERR(pcie->clk), + "could not enable clk\n"); + + pcie->clk_reg = devm_clk_get_enabled(dev, "reg"); + if (IS_ERR(pcie->clk_reg)) { + ret = dev_err_probe(dev, -EPROBE_DEFER, + "could not enable reg clk\n"); + if (ret == -EPROBE_DEFER) + return ret; } /* Get the dw-pcie unit configuration/control registers base. */ @@ -308,12 +302,12 @@ static int armada8k_pcie_probe(struct platform_device *pdev) pci->dbi_base = devm_pci_remap_cfg_resource(dev, base); if (IS_ERR(pci->dbi_base)) { ret = PTR_ERR(pci->dbi_base); - goto fail_clkreg; + goto out; } ret = armada8k_pcie_setup_phys(pcie); if (ret) - goto fail_clkreg; + goto out; platform_set_drvdata(pdev, pcie); @@ -325,11 +319,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev) disable_phy: armada8k_pcie_disable_phys(pcie); -fail_clkreg: - clk_disable_unprepare(pcie->clk_reg); -fail: - clk_disable_unprepare(pcie->clk); - +out: return ret; }
Use devm_clk_get_enabled() instead of devm_clk_get() to make the code cleaner and avoid calling clk_disable_unprepare() Signed-off-by: Wu Bo <bo.wu@vivo.com> --- v2: use dev_err_probe() to handle error return drivers/pci/controller/dwc/pcie-armada8k.c | 36 ++++++++-------------- 1 file changed, 13 insertions(+), 23 deletions(-)