| Message ID | 20240826070854.1948347-4-xu.yang_2@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" | expand |
On Mon, Aug 26, 2024 at 03:08:53PM +0800, Xu Yang wrote: > Add usb3 phy and controller nodes for imx95. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > --- > Changes in v2: > - no changes > Changes in v3: > - no changes > --- > arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi > index 1bbf9a0468f6..06a7c2f1e211 100644 > --- a/arch/arm64/boot/dts/freescale/imx95.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi > @@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 { > power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > status = "disabled"; > }; > + > + usb3_phy: phy@4c1f0040 { > + compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy"; > + reg = <0x0 0x4c1f0040 0x0 0x40>, > + <0x0 0x4c1fc000 0x0 0x100>; > + clocks = <&scmi_clk IMX95_CLK_HSIO>; > + clock-names = "phy"; > + #phy-cells = <0>; > + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > + orientation-switch; > + status = "disabled"; > + }; > + > + usb3: usb@4c010010 { Please try to sort nodes with unit-address in the address. Shawn > + compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3"; > + reg = <0x0 0x4c010010 0x0 0x04>, > + <0x0 0x4c1f0000 0x0 0x20>; > + clocks = <&scmi_clk IMX95_CLK_HSIO>, > + <&scmi_clk IMX95_CLK_32K>; > + clock-names = "hsio", "suspend"; > + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; > + status = "disabled"; > + > + usb3_dwc3: usb@4c100000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x4c100000 0x0 0x10000>; > + clocks = <&scmi_clk IMX95_CLK_HSIO>, > + <&scmi_clk IMX95_CLK_24M>, > + <&scmi_clk IMX95_CLK_32K>; > + clock-names = "bus_early", "ref", "suspend"; > + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usb3_phy>, <&usb3_phy>; > + phy-names = "usb2-phy", "usb3-phy"; > + snps,gfladj-refclk-lpm-sel-quirk; > + snps,parkmode-disable-ss-quirk; > + iommus = <&smmu 0xe>; > + }; > + }; > }; > }; > -- > 2.34.1 >
On Sun, Sep 01, 2024 at 04:07:01PM +0800, Shawn Guo wrote: > On Mon, Aug 26, 2024 at 03:08:53PM +0800, Xu Yang wrote: > > Add usb3 phy and controller nodes for imx95. > > > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > --- > > Changes in v2: > > - no changes > > Changes in v3: > > - no changes > > --- > > arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++ > > 1 file changed, 43 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi > > index 1bbf9a0468f6..06a7c2f1e211 100644 > > --- a/arch/arm64/boot/dts/freescale/imx95.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi > > @@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 { > > power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > > status = "disabled"; > > }; > > + > > + usb3_phy: phy@4c1f0040 { > > + compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy"; > > + reg = <0x0 0x4c1f0040 0x0 0x40>, > > + <0x0 0x4c1fc000 0x0 0x100>; > > + clocks = <&scmi_clk IMX95_CLK_HSIO>; > > + clock-names = "phy"; > > + #phy-cells = <0>; > > + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > > + orientation-switch; > > + status = "disabled"; > > + }; > > + > > + usb3: usb@4c010010 { > > Please try to sort nodes with unit-address in the address. Okay. Will fix it. Thanks, Xu Yang > > Shawn > > > + compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3"; > > + reg = <0x0 0x4c010010 0x0 0x04>, > > + <0x0 0x4c1f0000 0x0 0x20>; > > + clocks = <&scmi_clk IMX95_CLK_HSIO>, > > + <&scmi_clk IMX95_CLK_32K>; > > + clock-names = "hsio", "suspend"; > > + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; > > + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; > > + status = "disabled"; > > + > > + usb3_dwc3: usb@4c100000 { > > + compatible = "snps,dwc3"; > > + reg = <0x0 0x4c100000 0x0 0x10000>; > > + clocks = <&scmi_clk IMX95_CLK_HSIO>, > > + <&scmi_clk IMX95_CLK_24M>, > > + <&scmi_clk IMX95_CLK_32K>; > > + clock-names = "bus_early", "ref", "suspend"; > > + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; > > + phys = <&usb3_phy>, <&usb3_phy>; > > + phy-names = "usb2-phy", "usb3-phy"; > > + snps,gfladj-refclk-lpm-sel-quirk; > > + snps,parkmode-disable-ss-quirk; > > + iommus = <&smmu 0xe>; > > + }; > > + }; > > }; > > }; > > -- > > 2.34.1 > > >
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 1bbf9a0468f6..06a7c2f1e211 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 { power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; status = "disabled"; }; + + usb3_phy: phy@4c1f0040 { + compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy"; + reg = <0x0 0x4c1f0040 0x0 0x40>, + <0x0 0x4c1fc000 0x0 0x100>; + clocks = <&scmi_clk IMX95_CLK_HSIO>; + clock-names = "phy"; + #phy-cells = <0>; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + orientation-switch; + status = "disabled"; + }; + + usb3: usb@4c010010 { + compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3"; + reg = <0x0 0x4c010010 0x0 0x04>, + <0x0 0x4c1f0000 0x0 0x20>; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_32K>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + status = "disabled"; + + usb3_dwc3: usb@4c100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x4c100000 0x0 0x10000>; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_24M>, + <&scmi_clk IMX95_CLK_32K>; + clock-names = "bus_early", "ref", "suspend"; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,gfladj-refclk-lpm-sel-quirk; + snps,parkmode-disable-ss-quirk; + iommus = <&smmu 0xe>; + }; + }; }; };
Add usb3 phy and controller nodes for imx95. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - no changes Changes in v3: - no changes --- arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++ 1 file changed, 43 insertions(+)