@@ -569,6 +569,35 @@ &main_r5fss1 {
ti,cluster-mode = <0>;
};
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer12 {
+ status = "reserved";
+};
+
+&main_timer13 {
+ status = "reserved";
+};
+
+&main_timer14 {
+ status = "reserved";
+};
+
+&main_timer15 {
+ status = "reserved";
+};
+
&main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain use timers. Therefore, change the status of the timer nodes to "reserved" to avoid any clash. Usage is described as below: +===================+==============+ | Remoteproc node | Timer Node | +===================+==============+ | main_r5fss0_core0 | main_timer12 | +-------------------+--------------+ | main_r5fss0_core1 | main_timer13 | +-------------------+--------------+ | main_r5fss1_core0 | main_timer14 | +-------------------+--------------+ | main_r5fss1_core1 | main_timer15 | +-------------------+--------------+ | c66_0 | main_timer0 | +-------------------+--------------+ | c66_1 | main_timer1 | +-------------------+--------------+ | c71_0 | main_timer2 | +-------------------+--------------+ Fixes: 7f209dd1267c ("arm64: dts: ti: k3-j721e: Add general purpose timers") Signed-off-by: Beleswar Padhi <b-padhi@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 29 +++++++++++++++++++++ 1 file changed, 29 insertions(+)