| Message ID | 20240830102709.3970209-1-nm@ti.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names | expand |
Hi, On Aug 30, 2024 at 05:27:09 -0500, Nishanth Menon wrote: > Rename the pin mux and gpio-hog node names to match up with binding > rules. This fixes dtbs_check warnings: > 'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' > 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > Cc: Roger Quadros <rogerq@kernel.org> > > This is a trivial fix, so applying Fixes seemed over-board. > > arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso > index f08c0e272b53..f91589818e32 100644 > --- a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso > +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso > @@ -12,7 +12,7 @@ > #include "k3-pinctrl.h" > > &main_pmx0 { > - gpmc0_pins_default: gpmc0-pins-default { > + gpmc0_pins_default: gpmc0-default-pins { I mean, if you are anyway renaming, s/gpmc0_pins_default/gpmc0_default_pins > bootph-all; > pinctrl-single,pins = < > AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */ > @@ -50,7 +50,7 @@ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */ > }; > > &main_gpio0 { > - gpio0-36 { > + gpmc0-hog { > bootph-all; > gpio-hog; > gpios = <36 0>; With the change, Reviewed-by: Dhruva Gole <d-gole@ti.com>
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso index f08c0e272b53..f91589818e32 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso @@ -12,7 +12,7 @@ #include "k3-pinctrl.h" &main_pmx0 { - gpmc0_pins_default: gpmc0-pins-default { + gpmc0_pins_default: gpmc0-default-pins { bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */ @@ -50,7 +50,7 @@ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */ }; &main_gpio0 { - gpio0-36 { + gpmc0-hog { bootph-all; gpio-hog; gpios = <36 0>;
Rename the pin mux and gpio-hog node names to match up with binding rules. This fixes dtbs_check warnings: 'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+' 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Signed-off-by: Nishanth Menon <nm@ti.com> --- Cc: Roger Quadros <rogerq@kernel.org> This is a trivial fix, so applying Fixes seemed over-board. arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) base-commit: d2bafcf224f3911b183113b2fcb536c9e90684a3 prerequisite-patch-id: a9c45d98345ca492c945cd5050191ad605de242b